backport commit

require editor to fetch config
Sanitize paths before evaluating access to route
2025-04-07 09:27:14 -05:00 · 2025-04-07 09:27:14 -05:00 · 2025-04-07 09:27:14 -05:00
186 changed files with 1934 additions and 3967 deletions
@@ -6562,6 +6562,9 @@ exports[`better eslint`] = {
      [0, 0, 0, "Do not use export all (\`export * from ...\`)", "0"],
      [0, 0, 0, "Do not use export all (\`export * from ...\`)", "1"]
    ],
+    "public/app/plugins/datasource/azuremonitor/azure_monitor/azure_monitor_datasource.ts:5381": [
+      [0, 0, 0, "Do not use any type assertions.", "0"]
+    ],
    "public/app/plugins/datasource/azuremonitor/components/ArgQueryEditor/index.tsx:5381": [
      [0, 0, 0, "Do not re-export imported variable (\`./ArgQueryEditor\`)", "0"]
    ],
@@ -6608,9 +6611,6 @@ exports[`better eslint`] = {
    "public/app/plugins/datasource/azuremonitor/types/templateVariables.ts:5381": [
      [0, 0, 0, "Do not re-export imported variable (\`../dataquery.gen\`)", "0"]
    ],
-    "public/app/plugins/datasource/azuremonitor/utils/common.ts:5381": [
-      [0, 0, 0, "Do not use any type assertions.", "0"]
-    ],
    "public/app/plugins/datasource/azuremonitor/utils/messageFromError.ts:5381": [
      [0, 0, 0, "Unexpected any. Specify a different type.", "0"]
    ],
@@ -25,7 +25,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - ./bin/build verify-drone
@@ -75,7 +75,7 @@ steps:
  - go install github.com/bazelbuild/buildtools/buildifier@latest
  - buildifier --lint=warn -mode=check -r .
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: lint-starlark
 trigger:
  event:
@@ -427,7 +427,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -436,21 +436,21 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - apk add --update build-base shared-mime-info shared-mime-info-lang
  - go list -f '{{.Dir}}/...' -m  | xargs go test -short -covermode=atomic -timeout=5m
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: test-backend
 - commands:
  - apk add --update build-base
@@ -459,7 +459,7 @@ steps:
    | grep -o '\(.*\)/' | sort -u)
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: test-backend-integration
 trigger:
  event:
@@ -513,7 +513,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - echo $(/usr/bin/github-app-external-token) > /github-app/token
@@ -558,16 +558,16 @@ steps:
  - apk add --update make
  - make gen-go
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - go run scripts/modowners/modowners.go check go.mod
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: validate-modfile
 - commands:
  - apk add --update make
  - make swagger-validate
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: validate-openapi-spec
 trigger:
  event:
@@ -643,7 +643,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - '# It is required that code generated from Thema/CUE be committed and in sync
@@ -653,7 +653,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -662,7 +662,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - yarn install --immutable || yarn install --immutable
@@ -700,7 +700,7 @@ steps:
  - /src/grafana-build artifacts -a targz:grafana:linux/amd64 -a targz:grafana:linux/arm64
    -a targz:grafana:linux/arm/v7 -a docker:grafana:linux/amd64 -a docker:grafana:linux/amd64:ubuntu
    -a docker:grafana:linux/arm64 -a docker:grafana:linux/arm64:ubuntu -a docker:grafana:linux/arm/v7
-    -a docker:grafana:linux/arm/v7:ubuntu --go-version=1.24.2 --yarn-cache=$$YARN_CACHE_FOLDER
+    -a docker:grafana:linux/arm/v7:ubuntu --go-version=1.24.1 --yarn-cache=$$YARN_CACHE_FOLDER
    --build-id=$$DRONE_BUILD_NUMBER --ubuntu-base=ubuntu:22.04 --alpine-base=alpine:3.21.3
    --tag-format='{{ .version_base }}-{{ .buildID }}-{{ .arch }}' --ubuntu-tag-format='{{
    .version_base }}-{{ .buildID }}-ubuntu-{{ .arch }}' --verify='false' --grafana-dir=$$PWD
@@ -726,8 +726,10 @@ steps:
      from_secret: docker_password
    DOCKER_USER:
      from_secret: docker_username
-    GITHUB_APP_ID: "329617"
-    GITHUB_APP_INSTALLATION_ID: "37346161"
+    GITHUB_APP_ID:
+      from_secret: delivery-bot-app-id
+    GITHUB_APP_INSTALLATION_ID:
+      from_secret: delivery-bot-app-installation-id
    GITHUB_APP_PRIVATE_KEY:
      from_secret: delivery-bot-app-private-key
  failure: ignore
@@ -1096,7 +1098,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - echo $DRONE_RUNNER_NAME
@@ -1110,7 +1112,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -1119,14 +1121,14 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - dockerize -wait tcp://postgres:5432 -timeout 120s
@@ -1147,7 +1149,7 @@ steps:
    GRAFANA_TEST_DB: postgres
    PGPASSWORD: grafanatest
    POSTGRES_HOST: postgres
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: postgres-integration-tests
 - commands:
  - dockerize -wait tcp://mysql80:3306 -timeout 120s
@@ -1168,7 +1170,7 @@ steps:
  environment:
    GRAFANA_TEST_DB: mysql
    MYSQL_HOST: mysql80
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: mysql-8.0-integration-tests
 - commands:
  - dockerize -wait tcp://redis:6379 -timeout 120s
@@ -1184,7 +1186,7 @@ steps:
  - wait-for-redis
  environment:
    REDIS_URL: redis://redis:6379/0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: redis-integration-tests
 - commands:
  - dockerize -wait tcp://memcached:11211 -timeout 120s
@@ -1200,7 +1202,7 @@ steps:
  - wait-for-memcached
  environment:
    MEMCACHED_HOSTS: memcached:11211
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: memcached-integration-tests
 - commands:
  - dockerize -wait tcp://mimir_backend:8080 -timeout 120s
@@ -1216,7 +1218,7 @@ steps:
  environment:
    AM_TENANT_ID: test
    AM_URL: http://mimir_backend:8080
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: remote-alertmanager-integration-tests
 trigger:
  event:
@@ -1298,7 +1300,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 trigger:
  event:
@@ -1419,7 +1421,7 @@ steps:
    && return 1; fi
  depends_on:
  - clone-enterprise
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: swagger-gen
 trigger:
  event:
@@ -1524,7 +1526,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - '# It is required that code generated from Thema/CUE be committed and in sync
@@ -1535,7 +1537,7 @@ steps:
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on:
  - clone-enterprise
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -1545,14 +1547,14 @@ steps:
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on:
  - clone-enterprise
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - apk add --update build-base
@@ -1560,7 +1562,7 @@ steps:
  - go test -v -run=^$ -benchmem -timeout=1h -count=8 -bench=. ${GO_PACKAGES}
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: sqlite-benchmark-integration-tests
 - commands:
  - apk add --update build-base
@@ -1572,7 +1574,7 @@ steps:
    GRAFANA_TEST_DB: postgres
    PGPASSWORD: grafanatest
    POSTGRES_HOST: postgres
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: postgres-benchmark-integration-tests
 - commands:
  - apk add --update build-base
@@ -1583,7 +1585,7 @@ steps:
  environment:
    GRAFANA_TEST_DB: mysql
    MYSQL_HOST: mysql80
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: mysql-8.0-benchmark-integration-tests
 trigger:
  event:
@@ -1655,7 +1657,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 trigger:
  branch: main
@@ -1828,7 +1830,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -1837,21 +1839,21 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - apk add --update build-base shared-mime-info shared-mime-info-lang
  - go list -f '{{.Dir}}/...' -m  | xargs go test -short -covermode=atomic -timeout=5m
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: test-backend
 - commands:
  - apk add --update build-base
@@ -1860,7 +1862,7 @@ steps:
    | grep -o '\(.*\)/' | sort -u)
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: test-backend-integration
 trigger:
  branch: main
@@ -1905,22 +1907,22 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - apk add --update make
  - make gen-go
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - go run scripts/modowners/modowners.go check go.mod
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: validate-modfile
 - commands:
  - apk add --update make
  - make swagger-validate
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: validate-openapi-spec
 - commands:
  - ./bin/build verify-drone
@@ -2052,7 +2054,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - '# It is required that code generated from Thema/CUE be committed and in sync
@@ -2062,7 +2064,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -2071,7 +2073,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - yarn install --immutable || yarn install --immutable
@@ -2108,7 +2110,7 @@ steps:
  - /src/grafana-build artifacts -a targz:grafana:linux/amd64 -a targz:grafana:linux/arm64
    -a targz:grafana:linux/arm/v7 -a docker:grafana:linux/amd64 -a docker:grafana:linux/amd64:ubuntu
    -a docker:grafana:linux/arm64 -a docker:grafana:linux/arm64:ubuntu -a docker:grafana:linux/arm/v7
-    -a docker:grafana:linux/arm/v7:ubuntu --go-version=1.24.2 --yarn-cache=$$YARN_CACHE_FOLDER
+    -a docker:grafana:linux/arm/v7:ubuntu --go-version=1.24.1 --yarn-cache=$$YARN_CACHE_FOLDER
    --build-id=$$DRONE_BUILD_NUMBER --ubuntu-base=ubuntu:22.04 --alpine-base=alpine:3.21.3
    --tag-format='{{ .version_base }}-{{ .buildID }}-{{ .arch }}' --ubuntu-tag-format='{{
    .version_base }}-{{ .buildID }}-ubuntu-{{ .arch }}' --verify='false' --grafana-dir=$$PWD
@@ -2136,8 +2138,10 @@ steps:
      from_secret: docker_username
    GCP_KEY:
      from_secret: gcp_grafanauploads
-    GITHUB_APP_ID: "329617"
-    GITHUB_APP_INSTALLATION_ID: "37346161"
+    GITHUB_APP_ID:
+      from_secret: delivery-bot-app-id
+    GITHUB_APP_INSTALLATION_ID:
+      from_secret: delivery-bot-app-installation-id
    GITHUB_APP_PRIVATE_KEY:
      from_secret: delivery-bot-app-private-key
  image: google/cloud-sdk:431.0.0
@@ -2438,8 +2442,10 @@ steps:
      from_secret: docker_username
    GCP_KEY:
      from_secret: gcp_grafanauploads
-    GITHUB_APP_ID: "329617"
-    GITHUB_APP_INSTALLATION_ID: "37346161"
+    GITHUB_APP_ID:
+      from_secret: delivery-bot-app-id
+    GITHUB_APP_INSTALLATION_ID:
+      from_secret: delivery-bot-app-installation-id
    GITHUB_APP_PRIVATE_KEY:
      from_secret: delivery-bot-app-private-key
  image: google/cloud-sdk:431.0.0
@@ -2579,7 +2585,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - echo $DRONE_RUNNER_NAME
@@ -2593,7 +2599,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -2602,14 +2608,14 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - dockerize -wait tcp://postgres:5432 -timeout 120s
@@ -2630,7 +2636,7 @@ steps:
    GRAFANA_TEST_DB: postgres
    PGPASSWORD: grafanatest
    POSTGRES_HOST: postgres
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: postgres-integration-tests
 - commands:
  - dockerize -wait tcp://mysql80:3306 -timeout 120s
@@ -2651,7 +2657,7 @@ steps:
  environment:
    GRAFANA_TEST_DB: mysql
    MYSQL_HOST: mysql80
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: mysql-8.0-integration-tests
 - commands:
  - dockerize -wait tcp://redis:6379 -timeout 120s
@@ -2667,7 +2673,7 @@ steps:
  - wait-for-redis
  environment:
    REDIS_URL: redis://redis:6379/0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: redis-integration-tests
 - commands:
  - dockerize -wait tcp://memcached:11211 -timeout 120s
@@ -2683,7 +2689,7 @@ steps:
  - wait-for-memcached
  environment:
    MEMCACHED_HOSTS: memcached:11211
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: memcached-integration-tests
 - commands:
  - dockerize -wait tcp://mimir_backend:8080 -timeout 120s
@@ -2699,7 +2705,7 @@ steps:
  environment:
    AM_TENANT_ID: test
    AM_URL: http://mimir_backend:8080
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: remote-alertmanager-integration-tests
 trigger:
  branch: main
@@ -2958,7 +2964,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -2967,21 +2973,21 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - apk add --update build-base shared-mime-info shared-mime-info-lang
  - go list -f '{{.Dir}}/...' -m  | xargs go test -short -covermode=atomic -timeout=5m
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: test-backend
 - commands:
  - apk add --update build-base
@@ -2990,7 +2996,7 @@ steps:
    | grep -o '\(.*\)/' | sort -u)
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: test-backend-integration
 trigger:
  branch:
@@ -3033,22 +3039,22 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - apk add --update make
  - make gen-go
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - go run scripts/modowners/modowners.go check go.mod
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: validate-modfile
 - commands:
  - apk add --update make
  - make swagger-validate
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: validate-openapi-spec
 trigger:
  branch:
@@ -3127,7 +3133,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - echo $DRONE_RUNNER_NAME
@@ -3141,7 +3147,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -3150,14 +3156,14 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - dockerize -wait tcp://postgres:5432 -timeout 120s
@@ -3178,7 +3184,7 @@ steps:
    GRAFANA_TEST_DB: postgres
    PGPASSWORD: grafanatest
    POSTGRES_HOST: postgres
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: postgres-integration-tests
 - commands:
  - dockerize -wait tcp://mysql80:3306 -timeout 120s
@@ -3199,7 +3205,7 @@ steps:
  environment:
    GRAFANA_TEST_DB: mysql
    MYSQL_HOST: mysql80
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: mysql-8.0-integration-tests
 - commands:
  - dockerize -wait tcp://redis:6379 -timeout 120s
@@ -3215,7 +3221,7 @@ steps:
  - wait-for-redis
  environment:
    REDIS_URL: redis://redis:6379/0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: redis-integration-tests
 - commands:
  - dockerize -wait tcp://memcached:11211 -timeout 120s
@@ -3231,7 +3237,7 @@ steps:
  - wait-for-memcached
  environment:
    MEMCACHED_HOSTS: memcached:11211
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: memcached-integration-tests
 - commands:
  - dockerize -wait tcp://mimir_backend:8080 -timeout 120s
@@ -3247,7 +3253,7 @@ steps:
  environment:
    AM_TENANT_ID: test
    AM_URL: http://mimir_backend:8080
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: remote-alertmanager-integration-tests
 trigger:
  branch:
@@ -3347,7 +3353,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - ./bin/build artifacts docker fetch --edition oss
@@ -3425,8 +3431,10 @@ steps:
      from_secret: docker_username
    GCP_KEY:
      from_secret: gcp_grafanauploads
-    GITHUB_APP_ID: "329617"
-    GITHUB_APP_INSTALLATION_ID: "37346161"
+    GITHUB_APP_ID:
+      from_secret: delivery-bot-app-id
+    GITHUB_APP_INSTALLATION_ID:
+      from_secret: delivery-bot-app-installation-id
    GITHUB_APP_PRIVATE_KEY:
      from_secret: delivery-bot-app-private-key
  image: google/cloud-sdk:431.0.0
@@ -3477,7 +3485,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - ./bin/build artifacts docker fetch --edition oss
@@ -3618,7 +3626,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - ./bin/build artifacts packages --artifacts-editions=oss --tag $${DRONE_TAG} --src-bucket
@@ -3710,7 +3718,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - yarn install --immutable || yarn install --immutable
@@ -3810,7 +3818,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - depends_on:
  - compile-build-cmd
@@ -3907,7 +3915,7 @@ steps:
  depends_on: []
  environment:
    CGO_ENABLED: 0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: compile-build-cmd
 - commands:
  - ./bin/build publish grafana-com --edition oss ${DRONE_TAG}
@@ -3969,7 +3977,7 @@ steps:
      from_secret: grafana_api_key
    GCP_KEY_BASE64:
      from_secret: gcp_key_base64
-    GO_VERSION: 1.24.2
+    GO_VERSION: 1.24.1
    GPG_PASSPHRASE:
      from_secret: packages_gpg_passphrase
    GPG_PRIVATE_KEY:
@@ -4044,7 +4052,7 @@ steps:
      from_secret: grafana_api_key
    GCP_KEY_BASE64:
      from_secret: gcp_key_base64
-    GO_VERSION: 1.24.2
+    GO_VERSION: 1.24.1
    GPG_PASSPHRASE:
      from_secret: packages_gpg_passphrase
    GPG_PRIVATE_KEY:
@@ -4161,7 +4169,7 @@ steps:
      from_secret: grafana_api_key
    GCP_KEY_BASE64:
      from_secret: gcp_key_base64
-    GO_VERSION: 1.24.2
+    GO_VERSION: 1.24.1
    GPG_PASSPHRASE:
      from_secret: packages_gpg_passphrase
    GPG_PRIVATE_KEY:
@@ -4312,7 +4320,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -4321,21 +4329,21 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - apk add --update build-base shared-mime-info shared-mime-info-lang
  - go list -f '{{.Dir}}/...' -m  | xargs go test -short -covermode=atomic -timeout=5m
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: test-backend
 - commands:
  - apk add --update build-base
@@ -4344,7 +4352,7 @@ steps:
    | grep -o '\(.*\)/' | sort -u)
  depends_on:
  - wire-install
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: test-backend-integration
 trigger:
  cron:
@@ -4398,7 +4406,7 @@ steps:
      from_secret: grafana_api_key
    GCP_KEY_BASE64:
      from_secret: gcp_key_base64
-    GO_VERSION: 1.24.2
+    GO_VERSION: 1.24.1
    GPG_PASSPHRASE:
      from_secret: packages_gpg_passphrase
    GPG_PRIVATE_KEY:
@@ -4542,7 +4550,7 @@ steps:
      from_secret: grafana_api_key
    GCP_KEY_BASE64:
      from_secret: gcp_key_base64
-    GO_VERSION: 1.24.2
+    GO_VERSION: 1.24.1
    GPG_PASSPHRASE:
      from_secret: packages_gpg_passphrase
    GPG_PRIVATE_KEY:
@@ -4649,7 +4657,7 @@ steps:
  - export GITHUB_TOKEN=$(cat /github-app/token)
  - 'dagger run --silent /src/grafana-build artifacts -a $${ARTIFACTS} --grafana-ref=$${GRAFANA_REF}
    --enterprise-ref=$${ENTERPRISE_REF} --grafana-repo=$${GRAFANA_REPO} --version=$${VERSION} '
-  - --go-version=1.24.2
+  - --go-version=1.24.1
  depends_on:
  - github-app-generate-token
  environment:
@@ -4670,7 +4678,7 @@ steps:
      from_secret: grafana_api_key
    GCP_KEY_BASE64:
      from_secret: gcp_key_base64
-    GO_VERSION: 1.24.2
+    GO_VERSION: 1.24.1
    GPG_PASSPHRASE:
      from_secret: packages_gpg_passphrase
    GPG_PRIVATE_KEY:
@@ -4804,7 +4812,7 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-cue
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-cue
 - commands:
  - '# It is required that generated jsonnet is committed and in sync with its inputs.'
@@ -4813,14 +4821,14 @@ steps:
  - apk add --update make
  - CODEGEN_VERIFY=1 make gen-jsonnet
  depends_on: []
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: verify-gen-jsonnet
 - commands:
  - apk add --update make
  - make gen-go
  depends_on:
  - verify-gen-cue
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: wire-install
 - commands:
  - dockerize -wait tcp://postgres:5432 -timeout 120s
@@ -4841,7 +4849,7 @@ steps:
    GRAFANA_TEST_DB: postgres
    PGPASSWORD: grafanatest
    POSTGRES_HOST: postgres
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: postgres-integration-tests
 - commands:
  - dockerize -wait tcp://mysql80:3306 -timeout 120s
@@ -4862,7 +4870,7 @@ steps:
  environment:
    GRAFANA_TEST_DB: mysql
    MYSQL_HOST: mysql80
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: mysql-8.0-integration-tests
 - commands:
  - dockerize -wait tcp://redis:6379 -timeout 120s
@@ -4878,7 +4886,7 @@ steps:
  - wait-for-redis
  environment:
    REDIS_URL: redis://redis:6379/0
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: redis-integration-tests
 - commands:
  - dockerize -wait tcp://memcached:11211 -timeout 120s
@@ -4894,7 +4902,7 @@ steps:
  - wait-for-memcached
  environment:
    MEMCACHED_HOSTS: memcached:11211
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: memcached-integration-tests
 - commands:
  - dockerize -wait tcp://mimir_backend:8080 -timeout 120s
@@ -4910,7 +4918,7 @@ steps:
  environment:
    AM_TENANT_ID: test
    AM_URL: http://mimir_backend:8080
-  image: golang:1.24.2-alpine
+  image: golang:1.24.1-alpine
  name: remote-alertmanager-integration-tests
 trigger:
  event:
@@ -5213,7 +5221,7 @@ steps:
 - commands:
  - trivy --exit-code 0 --severity UNKNOWN,LOW,MEDIUM docker:27-cli
  - trivy --exit-code 0 --severity UNKNOWN,LOW,MEDIUM alpine/git:2.40.1
-  - trivy --exit-code 0 --severity UNKNOWN,LOW,MEDIUM golang:1.24.2-alpine
+  - trivy --exit-code 0 --severity UNKNOWN,LOW,MEDIUM golang:1.24.1-alpine
  - trivy --exit-code 0 --severity UNKNOWN,LOW,MEDIUM node:22.11.0-alpine
  - trivy --exit-code 0 --severity UNKNOWN,LOW,MEDIUM node:22-bookworm
  - trivy --exit-code 0 --severity UNKNOWN,LOW,MEDIUM google/cloud-sdk:431.0.0
@@ -5251,7 +5259,7 @@ steps:
 - commands:
  - trivy --exit-code 1 --severity HIGH,CRITICAL docker:27-cli
  - trivy --exit-code 1 --severity HIGH,CRITICAL alpine/git:2.40.1
-  - trivy --exit-code 1 --severity HIGH,CRITICAL golang:1.24.2-alpine
+  - trivy --exit-code 1 --severity HIGH,CRITICAL golang:1.24.1-alpine
  - trivy --exit-code 1 --severity HIGH,CRITICAL node:22.11.0-alpine
  - trivy --exit-code 1 --severity HIGH,CRITICAL node:22-bookworm
  - trivy --exit-code 1 --severity HIGH,CRITICAL google/cloud-sdk:431.0.0
@@ -5371,13 +5379,13 @@ name: prerelease_bucket
 ---
 get:
  name: username
-  path: ci/data/common/dockerhub
+  path: infra/data/ci/grafanaci-docker-hub
 kind: secret
 name: docker_username
 ---
 get:
  name: password
-  path: ci/data/common/dockerhub
+  path: infra/data/ci/grafanaci-docker-hub
 kind: secret
 name: docker_password
 ---
@@ -5496,8 +5504,20 @@ kind: secret
 name: dagger_token
 ---
 get:
-  name: PRIVATE_KEY
-  path: ci/data/repo/grafana/grafana/delivery-bot-app
+  name: app-id
+  path: infra/data/ci/grafana-release-eng/grafana-delivery-bot
+kind: secret
+name: delivery-bot-app-id
+---
+get:
+  name: app-installation-id
+  path: infra/data/ci/grafana-release-eng/grafana-delivery-bot
+kind: secret
+name: delivery-bot-app-installation-id
+---
+get:
+  name: app-private-key
+  path: infra/data/ci/grafana-release-eng/grafana-delivery-bot
 kind: secret
 name: delivery-bot-app-private-key
 ---
@@ -5508,6 +5528,6 @@ kind: secret
 name: gcr_credentials
 ---
 kind: signature
-hmac: 2b752d7a02b0b111ac5871f61c5d6a694450ccf541b0de5d3f579b79c267e613
+hmac: b2d4333ae94bbab37ed239db0a61ce3667ba7da84be024584aba367602e064f6

 ...
@@ -1,22 +1,3 @@
-<!-- 11.5.3 START -->
-
-# 11.5.3 (2025-03-25)
-
-### Features and enhancements
-
- **Chore:** Bump Go to 1.23.7 [#101581](https://github.com/grafana/grafana/pull/101581), [@macabu](https://github.com/macabu)
- **Chore:** Bump Go to 1.23.7 (Enterprise)
-
-### Bug fixes
-
- **Alerting:** Fix token-based Slack image upload to work with channel names [#101078](https://github.com/grafana/grafana/pull/101078), [@JacobsonMT](https://github.com/JacobsonMT)
- **Auth:** Fix AzureAD config UI's ClientAuthentication dropdown [#100869](https://github.com/grafana/grafana/pull/100869), [@mgyongyosi](https://github.com/mgyongyosi)
- **Dashboard:** Fix the unintentional time range and variables updates on saving [#101671](https://github.com/grafana/grafana/pull/101671), [@harisrozajac](https://github.com/harisrozajac)
- **Dashboards:** Fix missing `v/e/i` keybindings to return back to dashboard [#102365](https://github.com/grafana/grafana/pull/102365), [@mdvictor](https://github.com/mdvictor)
- **InfluxDB:** Improve handling of template variables contained in regular expressions (InfluxQL) [#100977](https://github.com/grafana/grafana/pull/100977), [@aangelisc](https://github.com/aangelisc)
- **Org redirection:** Fix linking between orgs [#102089](https://github.com/grafana/grafana/pull/102089), [@ashharrison90](https://github.com/ashharrison90)
-
-<!-- 11.5.3 END -->
 <!-- 11.5.2 START -->

 # 11.5.2 (2025-02-18)
@@ -6,7 +6,7 @@
 ARG BASE_IMAGE=alpine:3.21
 ARG JS_IMAGE=node:22-alpine
 ARG JS_PLATFORM=linux/amd64
-ARG GO_IMAGE=golang:1.24.2-alpine
+ARG GO_IMAGE=golang:1.23.7-alpine

 # Default to building locally
 ARG GO_SRC=go-builder
@@ -8,7 +8,7 @@ WIRE_TAGS = "oss"
 include .bingo/Variables.mk

 GO = go
-GO_VERSION = 1.24.2
+GO_VERSION = 1.23.7
 GO_LINT_FILES ?= $(shell ./scripts/go-workspace/golangci-lint-includes.sh)
 GO_TEST_FILES ?= $(shell ./scripts/go-workspace/test-includes.sh)
 SH_FILES ?= $(shell find ./scripts -name *.sh)
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/apps/alerting/notifications

-go 1.24.2
+go 1.23.7

 replace github.com/grafana/grafana => ../../..

@@ -48,8 +48,8 @@ github.com/go-task/slim-sprig/v3 v3.0.0/go.mod h1:W848ghGpv3Qj3dhTPRyJypKRiqCdHZ
 github.com/godbus/dbus/v5 v5.0.4/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
 github.com/gogo/protobuf v1.3.2 h1:Ov1cvc58UF3b5XjBnZv7+opcTcQFZebYjWzi34vdm4Q=
 github.com/gogo/protobuf v1.3.2/go.mod h1:P1XiOD3dCwIKUDQYPy72D8LYyHL2YPYrpS2s69NZV8Q=
-github.com/golang-jwt/jwt/v4 v4.5.2 h1:YtQM7lnr8iZ+j5q71MGKkNw9Mn7AjHM68uc9g5fXeUI=
-github.com/golang-jwt/jwt/v4 v4.5.2/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
+github.com/golang-jwt/jwt/v4 v4.5.1 h1:JdqV9zKUdtaa9gdPlywC3aeoEsR681PlKC+4F5gQgeo=
+github.com/golang-jwt/jwt/v4 v4.5.1/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
 github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b/go.mod h1:SBH7ygxi8pfUlaOkMMuAQtPIUF8ecWP5IEl/CR7VP2Q=
 github.com/golang/mock v1.1.1/go.mod h1:oTYuIxOrZwtPieC+H1uAHpcLFnEyAGVDL/k47Jfbm0A=
 github.com/golang/protobuf v1.2.0/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/apps/investigation

-go 1.24.2
+go 1.23.7

 require (
 	github.com/grafana/grafana-app-sdk v0.23.1
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/apps/playlist

-go 1.24.2
+go 1.23.7

 require (
 	github.com/grafana/grafana-app-sdk v0.23.1
@@ -1,6 +1,6 @@
 module high-card

-go 1.24.2
+go 1.23.7

 require (
 	github.com/prometheus/client_golang v1.20.2
@@ -1,6 +1,6 @@
 module utf8-support

-go 1.24.2
+go 1.23.7

 require (
 	github.com/prometheus/client_golang v1.20.5
@@ -86,10 +86,6 @@ _Grafana Open Source Software (OSS)_ enables you to query, visualize, alert on,
 _Grafana Enterprise_ is a commercial edition of Grafana that includes exclusive data source plugins and additional features not found in the open source version. You also get 24x7x365 support and training from the core Grafana team.
 To learn more about these features, refer to [Enterprise features](https://grafana.com/docs/grafana/<GRAFANA_VERSION>/introduction/grafana-enterprise/#enterprise-features-in-grafana-cloud).

-## Guidance and help
-
-{{< guide name="whichgrafana" title="Which Grafana is right for you?" text="Answer a few questions and Grot will help you decide." >}}
-
 ## Learn

 {{< card-grid key="cards" type="simple" >}}
@@ -48,24 +48,19 @@ For an introduction to templating and template variables, refer to the [Templati

 You can specify these Azure Monitor data source queries in the Variable edit view's **Query Type** field.

-| Name                    | Description                                                                                                                                    |
-| ----------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------- |
-| **Subscriptions**       | Returns subscriptions.                                                                                                                         |
-| **Resource Groups**     | Returns resource groups for a specified subscription. Supports multi-value.                                                                    |
-| **Namespaces**          | Returns metric namespaces for the specified subscription. If a resource group is provided, only the namespaces within that group are returned. |
-| **Regions**             | Returns regions for the specified subscription                                                                                                 |
-| **Resource Names**      | Returns a list of resource names for a specified subscription, resource group and namespace. Supports multi-value.                             |
-| **Metric Names**        | Returns a list of metric names for a resource.                                                                                                 |
-| **Workspaces**          | Returns a list of workspaces for the specified subscription.                                                                                   |
-| **Logs**                | Use a KQL query to return values.                                                                                                              |
-| **Custom Namespaces**   | Returns metric namespaces for the specified resource.                                                                                          |
-| **Custom Metric Names** | Returns a list of custom metric names for the specified resource.                                                                              |
+| Name                | Description                                                                                                        |
+| ------------------- | ------------------------------------------------------------------------------------------------------------------ |
+| **Subscriptions**   | Returns subscriptions.                                                                                             |
+| **Resource Groups** | Returns resource groups for a specified. Supports multi-value. subscription.                                       |
+| **Namespaces**      | Returns metric namespaces for the specified subscription and resource group.                                       |
+| **Regions**         | Returns regions for the specified subscription                                                                     |
+| **Resource Names**  | Returns a list of resource names for a specified subscription, resource group and namespace. Supports multi-value. |
+| **Metric Names**    | Returns a list of metric names for a resource.                                                                     |
+| **Workspaces**      | Returns a list of workspaces for the specified subscription.                                                       |
+| **Logs**            | Use a KQL query to return values.                                                                                  |
+| **Resource Graph**  | Use an ARG query to return values.                                                                                 |

-{{< admonition type="note" >}}
-Custom metrics cannot be emitted against a subscription or resource group. Select resources only when you need to retrieve custom metric namespaces or custom metric names associated with a specific resource.
-{{< /admonition >}}
-
-You can use any Log Analytics Kusto Query Language (KQL) query that returns a single list of values in the `Query` field.
+Any Log Analytics Kusto Query Language (KQL) query that returns a single list of values can also be used in the Query field.
 For example:

 | Query                                                                                     | List of values returned                 |
@@ -22,71 +22,69 @@ weight: 100

 The annotations list shows a list of available annotations you can use to view annotated data. Various options are available to filter the list based on tags and on the current dashboard.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-annotations-list-viz-v12.0.png" max-width="750px" alt="The annotations list visualization" >}}
-
-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Annotation query options
+## Annotation query

-The following options control the source query for the list of annotations:
+The following options control the source query for the list of annotations.

-<!-- prettier-ignore-start -->
+### Query Filter

-| Option     | Description                                                                                               |
-| ---------- | --------------------------------------------------------------------------------------------------------- |
-| [Query filter](#query-filter) | Specify which annotations are included in the list.  |
-| [Time Range](#time-range) | Specify whether the list should be limited to the current time range. |
-| Tags | Filter the annotations by tags. You can add multiple tags to refine the list. Optionally, leave the tag list empty and filter in view mode by selecting tags that are listed as part of the results on the panel itself. |
-| Limit | Limit the number of results returned. |
+Use the query filter to create a list of annotations from all dashboards in your organization or the current dashboard in which this panel is located. It has the following options:

-<!-- prettier-ignore-end -->
+- All dashboards - List annotations from all dashboards in the current organization.
+- This dashboard - Limit the list to the annotations on the current dashboard.

-#### Query filter
+### Time Range

-Use the **Query filter** option to create a list of annotations from all dashboards in your organization or the current dashboard in which this panel is located.
-Choose from:
+Use the time range option to specify whether the list should be limited to the current time range. It has the following options:

- **All dashboards** - List annotations from all dashboards in the current organization.
- **This dashboard** - Limit the list to the annotations on the current dashboard.
+- None - no time range limit for the annotations query.
+- This dashboard - Limit the list to the time range of the dashboard where the annotations list is available.

-#### Time Range
+### Tags

-Specify whether the list should be limited to the current time range.
-Choose from:
+Use the tags option to filter the annotations by tags. You can add multiple tags in order to refine the list.

- **None** - No time range limit for the annotations query.
- **This dashboard** - Limit the list to the time range of the dashboard where the annotations list is available.
+{{% admonition type="note" %}}
+Optionally, leave the tag list empty and filter on the fly by selecting tags that are listed as part of the results on the panel itself.
+{{% /admonition %}}

-### Display options
+### Limit

-These options control additional metadata included in the annotations list display:
+Use the limit option to limit the number of results returned.

-<!-- prettier-ignore-start -->
+## Display

-| Option     | Description                                                                                               |
-| ---------- | --------------------------------------------------------------------------------------------------------- |
-| Show user | Show or hide which user created the annotation.  |
-| Show time | Show or hide the time the annotation creation time. |
-| Show tags | Show or hide the tags associated with an annotation. Note that you can use the tags to filter the annotations list. |
+These options control additional meta-data included in the annotations list display.

-<!-- prettier-ignore-end -->
+### Show user

-### Link behavior options
+Use this option to show or hide which user created the annotation.

-Use the following options to control the behavior of annotation links in the list:
+### Show time

-<!-- prettier-ignore-start -->
+Use this option to show or hide the time the annotation creation time.

-| Option     | Description                                                                                               |
-| ---------- | --------------------------------------------------------------------------------------------------------- |
-| Link target | Set how to view the annotated data. Choose from:<ul><li>**Panel** - The link takes you directly to a full-screen view of the panel with the corresponding annotation.</li><li>**Dashboard** - Focuses the annotation in the context of a complete dashboard.</li></ul> |
-| Time before | Set the time range before the annotation. Use duration string values like `1h` for one hour and `10m` for 10 minutes. |
-| Time after | Set the time range after the annotation. |
+### Show Tags

-<!-- prettier-ignore-end -->
+Use this option to show or hide the tags associated with an annotation. _NB_: You can use the tags to live-filter the annotations list on the visualization itself.
+
+## Link behavior
+
+### Link target
+
+Use this option to chose how to view the annotated data. It has the following options.
+
+- Panel - This option will take you directly to a full-screen view of the panel with the corresponding annotation
+- Dashboard - This option will focus the annotation in the context of a complete dashboard
+
+### Time before
+
+Use this option to set the time range before the annotation. Use duration string values like "1h" = 1 hour, "10m" = 10 minutes, etc.
+
+### Time after
+
+Use this option to set the time range after the annotation.
@@ -33,7 +33,7 @@ Candlestick visualizations build upon the foundation of the [time series visuali

 You can use a candlestick if you want to visualize, at a glance, how a price moved over time, whether it went up, down, or stayed the same, and how much it fluctuated:

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-candlestick-v11.6.png" max-width="750px" alt="A candlestick visualization" >}}
+{{< figure src="/static/img/docs/candlestick-panel/candlestick-panel-8-3.png" max-width="1065px" alt="A candlestick visualization" >}}

 Each candlestick is represented as a rectangle, referred to as the _candlestick body_. The candlestick body displays the opening and closing prices during a time period. Green candlesticks represent when the price appreciated while the red candlesticks represent when the price depreciated. The lines sticking out the candlestick body are referred to as _wicks_ or _shadows_, which represent the highest and lowest prices during the time period.

@@ -74,47 +74,43 @@ The candlestick visualization works best with price movement data for an asset.

 The data is converted as follows:

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-candles-volume-v11.6.png" max-width="750px" alt="A candlestick visualization showing the price movements of specific asset." >}}
+{{< figure src="/static/img/docs/candlestick-panel/candlestick.png" max-width="1065px" alt="A candlestick visualization showing the price movements of specific asset." >}}

-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Candlestick options
+## Mode

-The following options let you control which data is displayed in the visualization and how it appears:
+The mode options allow you to toggle which dimensions are used for the visualization.

-| Option                                                 | Description                                                                                                                                                                                                                                                                                           |
-| ------------------------------------------------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| Mode                                                   | Controls which dimensions are used for the visualization. Choose from:<ul><li>**Candles** - Uses the open, high, low, and close dimensions.</li><li>**Volume** - Uses only the volume dimension.</li><li>**Both** - The default behavior, which displays both candles and volume values.</li></ul>    |
-| Candle style                                           | Controls the appearance of the candles. Choose from:<ul><li>**Candles** - The default display style, which creates candle-style markers between the open and close dimensions.</li><li>**OHLC Bars** - Displays values for the four core dimensions, open, high, low, and close.</li></ul>            |
-| [Color strategy](#color-strategy)                      | Controls how colors are applied to dimensions. Choose from:<ul><li>**Since Open** - This mode uses the **Up color** if the intra-period price movement is positive.</li><li>**Since Prior Close** - The color of the candle is based on the inter-period price movement or change in value.</li></ul> |
-| Up color/Down color                                    | These options control which colors are used when the price movement is up or down. Note that the **Color strategy** selection determines if intra-period or inter-period price movement is used to select the candle or OHLC bar color.                                                               |
-| [Open, High, Low, Close, Volume](#open-high-low-close) | The candlestick visualization attempts to map fields from your data to these dimensions, as appropriate dimension.                                                                                                                                                                                    |
-| [Additional fields](#additional-fields)                | The **Include** and **Ignore** options allow the candlestick visualization to display other included data such as simple moving averages, Bollinger bands and more, using the same styles and configurations available in the [time series](ref:time-series-visualization) visualization.             |
+- **Candles** limits the panel dimensions to the open, high, low, and close dimensions used by candlestick visualizations.
+- **Volume** limits the panel dimension to the volume dimension.
+- **Both** is the default behavior for the candlestick visualization. It includes both candlestick and volume visualizations.

-#### Color strategy
+## Candle style

-The **Color strategy** option controls how colors are applied to dimensions. Choose from:
+- **Candles** is the default display style and creates candle-style visualizations between the open and close dimensions.
+- **OHLC Bars** displays the four core dimensions open, high, low, and close values.

- **Since Open** - The default behavior. This mode uses the **Up color** if the intra-period price movement is positive. In other words, if the value on close is greater or equal to the value on open, the **Up color** is used.
- **Since Prior Close** - An alternative display method where the color of the candle is based on the inter-period price movement or change in value. In other words, if the value on open is greater than the previous value on close, the **Up color** is used. If the value on open is lower than the previous value on close, the **Down color** is used.
+## Color strategy

-  This option also triggers the _hollow candlestick_ visualization mode. Hollow candlesticks indicate that the intra-period movement is positive (value is higher on close than on open), while filled candlesticks indicate the intra-period change is negative (value is lower on close than on open). To learn more, refer to the [explanation of the differences](https://thetradingbible.com/how-to-read-hollow-candlesticks).
+- **Since Open** is the default behavior. This mode will utilize the _Up_ color (below) if the intra-period price movement is positive. In other words, if the value on close is greater or equal to the value on open, the _Up_ color is used.
+- **Since Prior Close** is an alternative display method based where the color of the candle is based on the inter-period price movement or change in value. In other words, if the value on open is greater than the previous value on close, the _Up_ color is used. If the value on open is lower than the previous value on close, the _Down_ color is used. _This option also triggers the hollow candlestick visualization mode_. Hollow candlesticks indicate that the intra-period movement is positive (value is higher on close than on open), filled candlesticks indicate the intra-period change is negative (value is lower on close than on open). To learn more, see the [explanation of the differences](https://thetradingbible.com/how-to-read-hollow-candlesticks).

-#### Open, High, Low, Close, Volume {#open-high-low-close}
+## Up & Down Colors

-The candlestick visualization attempts to map fields from your data to the appropriate dimension:
+The **Up color** and **Down color** options select which colors are used when the price movement is up or down. Please note that the _Color strategy_ above will determine if intra-period or inter-period price movement is used to select the candle or OHLC bar color.

- **Open** - Starting value of the given period.
- **High** - Highest value of the given period.
- **Low** - Lowest value of the given period.
- **Close** - Final (end) value of the given period.
- **Volume** - Sample count in the given period (for example, number of trades).
+## Open, High, Low, Close
+
+The candlestick visualization will attempt to map fields from your data to the appropriate dimension:
+
+- **Open** corresponds to the starting value of the given period.
+- **High** corresponds to the highest value of the given period.
+- **Low** corresponds to the lowest value of the given period.
+- **Close** corresponds to the final (end) value of the given period.
+- **Volume** corresponds to the sample count in the given period. (for example, number of trades)

 {{% admonition type="note" %}}
 The candlestick visualization legend doesn't display these values.
@@ -122,79 +118,36 @@ The candlestick visualization legend doesn't display these values.

 If your data can't be mapped to these dimensions for some reason (for example, because the column names aren't the same), you can map them manually using the **Open**, **High**, **Low**, and **Close** fields under the **Candlestick** options in the panel editor:

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-olhc-options-v11.6.png" max-width="400px" alt="Open, High, Low, and Close fields in the panel editor" >}}
+![Open, High, Low, and Close fields in the panel editor](/media/docs/grafana/panels-visualizations/screenshot-olhc-options-10.3.png)

-#### Additional fields
+### Additional fields

-The candlestick visualization is based on the time series visualization, and it can visualize additional data dimensions beyond open, high, low, close, and volume.
-The **Include** and **Ignore** options allow it to visualize other included data such as simple moving averages, Bollinger bands and more, using the same styles and configurations available in the [time series](ref:time-series-visualization) visualization.
+The candlestick visualization is based on the time series visualization. It can visualize additional data dimensions beyond open, high, low, close, and volume The **Include** and **Ignore** options allow it to visualize other included data such as simple moving averages, Bollinger bands and more, using the same styles and configurations available in the [time series](ref:time-series-visualization) visualization.

-### Tooltip options
-
-Tooltip options control the information overlay that appears when you hover over data points in the visualization.
-
-| Option                                  | Description                                                                                                                    |
-| --------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------ |
-| [Tooltip mode](#tooltip-mode)           | When you hover your cursor over the visualization, Grafana can display tooltips. Choose how tooltips behave.                   |
-| [Values sort order](#values-sort-order) | This option controls the order in which values are listed in a tooltip.                                                        |
-| [Hover proximity](#hover-proximity)     | Set the hover proximity (in pixels) to control how close the cursor must be to a data point to trigger the tooltip to display. |
-| Max width                               | Set the maximum width of the tooltip box.                                                                                      |
-| Max height                              | Set the maximum height of the tooltip box. The default is 600 pixels.                                                          |
-
-#### Tooltip mode
-
-When you hover your cursor over the visualization, Grafana can display tooltips. Choose how tooltips behave.
-
- **Single -** The hover tooltip shows only a single series, the one that you are hovering over on the visualization.
- **All -** The hover tooltip shows all series in the visualization. Grafana highlights the series that you are hovering over in bold in the series list in the tooltip.
- **Hidden -** Do not display the tooltip when you interact with the visualization.
-
-Use an override to hide individual series from the tooltip.
-
-#### Values sort order
-
-When you set the **Tooltip mode** to **All**, the **Values sort order** option is displayed. This option controls the order in which values are listed in a tooltip. Choose from the following:
-
- **None** - Grafana automatically sorts the values displayed in a tooltip.
- **Ascending** - Values in the tooltip are listed from smallest to largest.
- **Descending** - Values in the tooltip are listed from largest to smallest.
-
-#### Hover proximity
-
-Set the hover proximity (in pixels) to control how close the cursor must be to a data point to trigger the tooltip to display.
-
-![Adding a hover proximity limit for tooltips](/media/docs/grafana/gif-grafana-10-4-hover-proximity.gif)
-
-### Legend options
-
-{{< docs/shared lookup="visualizations/legend-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Graph styles options
-
-The options under the **Graph styles** section let you control the general appearance of [additional fields](#additional-fields) in the visualization, excluding [color](#standard-options).
-
-{{< docs/shared lookup="visualizations/graph-styles-options.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
-
-### Axis options
-
-{{< docs/shared lookup="visualizations/axis-options-2.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
-
-### Standard options
+## Standard options

 {{< docs/shared lookup="visualizations/standard-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Data links
+## Legend options
+
+{{< docs/shared lookup="visualizations/legend-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Tooltip options
+
+{{< docs/shared lookup="visualizations/tooltip-options-2.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Data links

 {{< docs/shared lookup="visualizations/datalink-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Value mappings
-
-{{< docs/shared lookup="visualizations/value-mappings-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Thresholds
+## Thresholds

 {{< docs/shared lookup="visualizations/thresholds-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Field overrides
+## Value mappings
+
+{{< docs/shared lookup="visualizations/value-mappings-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Field overrides

 {{< docs/shared lookup="visualizations/overrides-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
@@ -35,7 +35,7 @@ refs:

 Dashboard lists allow you to display dynamic links to other dashboards. You can configure the list to use starred dashboards, recently viewed dashboards, a search query, and dashboard tags.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-dashboard-list-v11.6.png" max-width="750px" alt="A dashboard list visualization" >}}
+{{< figure src="/static/img/docs/v45/dashboard-list-panels.png" max-width="850px" alt="A dashboard list visualization" >}}

 On each dashboard load, this panel queries the dashboard list, always providing the most up-to-date results.

@@ -49,53 +49,62 @@ Once you’ve created a [dashboard](ref:dashboard), the following video shows yo

 {{< docs/play title="Dashboard List Visualization" url="https://play.grafana.org/d/fdlojrg7daebka/" >}}

-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Dashboard list options
+## Dashboard list options

 Use the following options to refine your dashboard list visualization.

-<!-- prettier-ignore-start -->
+### Include current time range

-| Option | Description |
-| ------ | ----------- |
-| Include current time range | Propagate the time range of the current dashboard to the dashboard list links. When you click a link, the linked dashboard opens with the indicated time range already set. |
-| Include current template variable values | Include template variables that are being used as query parameters in the dashboard list link. When you click the link, any matching templates in the linked dashboard are set to the values from the link. Learn more in [Dashboard URL variables](ref:dashboard-url-variables). |
-| Starred | Display starred dashboards in alphabetical order. |
-| Recently viewed | Display recently viewed dashboards in alphabetical order. |
-| Search | Display dashboards returned by search. You must enter at least one value in the search fields, **Query** or **Tags**. Variable interpolation is supported for both fields. For example, `$my_var` or `${my_var}`. |
-| Show headings | Headings for enabled sections are displayed. Sections are:<ul><li>**Starred**</li><li>**Recently viewed**</li><li>**Search**</li> |
-| Show folder names | Display the name of the folder where the dashboard is located. |
-| Max items | Set the maximum number of items to list per section. If you enter "10" and enable **Starred** and **Recently viewed** dashboards, the panel displays up to 20 total dashboards, 10 in each section. |
-| [Query](#query) | Search by dashboard name. This option is only applied when the **Search** switch is toggled on. |
-| [Folder](#folder) | Only dashboards from the selected folder are displayed in the dashboard list. This option is only applied when the **Search** switch is toggled on. |
-| [Tags](#tags) | Search by tags. This option is only applied when the **Search** switch is toggled on.  |
+Select this option to propagate the time range of the current dashboard to the dashboard links. When you click a link, the linked dashboard opens with the indicated time range already set.

-<!-- prettier-ignore-end -->
+### Include current template variable values

-#### Query
+Select this option to include template variables that are being used as query parameters in a link. When you click the link, any matching templates in the linked dashboard are set to the values from the link. Learn more in [Dashboard URL variables](ref:dashboard-url-variables).

-Use this field to search by dashboard name. Query terms are case-insensitive and partial values are accepted.
-For example, if you have dashboards called "Indoor Temps" and "Outdoor temp", entering the word "temp" returns both results.
-This option is only applied when the **Search** switch is toggled on.
+### Starred

-#### Folder
+Display starred dashboards in alphabetical order.

-Only dashboards from the selected folder are included in search results and displayed in the dashboard list.
-To include all dashboards in search results, select the top-level **Dashboards** folder.
-This option is only applied when the **Search** switch is toggled on.
+### Recently viewed

-#### Tags
+Display recently viewed dashboards in alphabetical order.

-Enter tags by which you want to search. Note that tags don't appear as you type, and they're case sensitive.
-Tag search uses an `OR` condition, so if a dashboard has one of the defined tags, it's included in the list.
+### Search

+Display dashboards by search query or tags. You must enter at least one value in **Query** or **Tags**. For the **Query** and **Tags** fields, variable interpolation is supported. For example, `$my_var` or `${my_var}`. Learn more in [Search option](#search-options).
+
+### Show headings
+
+The selected list section is shown as a heading:
+
+- **Starred**
+- **Recently viewed**
+- **Search**
+
+### Max items
+
+Sets the maximum number of items to list per section. For example, if you leave this at the default value of 10 and select **Starred** and **Recently viewed** dashboards, then the panel displays up to 20 total dashboards, 10 in each section.
+
+## Search options
+
+These options only apply if you select the **Search** option.
+
+### Query
+
+Use this field to search by dashboard name. Query terms are case-insensitive and partial values are accepted. For example, if you have dashboards called "Indoor Temps" and "Outdoor temp", entering the word "temp" would return both results.
+
+### Folder
+
+Select the dashboard folders that you want to display.
+
+### Tags
+
+Enter tags by which you want to search. Note that tags don't appear as you type, and they're case sensitive. Tag search uses an `OR` condition, so if a dashboard has one of the defined tags, it's included in the list.
+
+{{< admonition type="note" >}}
 When multiple tags and strings appear, the dashboard list displays those matching _all_ conditions.
-
-This option is only applied when the **Search** switch is toggled on.
+{{< /admonition >}}
@@ -29,20 +29,23 @@ refs:

 # Datagrid

-{{< docs/experimental product="The datagrid visualization" featureFlag="`enableDatagridEditing`" >}}
+{{% admonition type="note" %}}
+
+The Grafana datagrid is experimental. This feature is supported by the engineering team on a best-effort basis, and breaking changes may occur without notice prior to general availability.
+
+{{% /admonition %}}

 Datagrids offer you the ability to create, edit, and fine-tune data within Grafana. As such, this panel can act as a data source for other panels
 inside a dashboard.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-datagrid-visualization-v12.0.png" max-width="750px" alt="The datagrid visualization" >}}
+![Datagrid panel](/media/docs/datagrid/screenshot-grafana-datagrid-panel.png)

-Through it, you can manipulate data queried from any data source, you can start from a blank slate, or you can pull data from a dragged and dropped file.
-You can then use the panel as a simple tabular visualization, or you can modify the data—and even remove it altogether—to create a blank slate.
+Through it, you can manipulate data queried from any data source, you can start from a blank slate, or you can pull data from a dragged and dropped file. You can then use the panel as a simple tabular
+visualization, or you can modify the data—and even remove it altogether—to create a blank slate.

 Editing the dataset changes the data source to use the inbuilt `-- Grafana --` data source, thus replacing the old data source settings and related queries, while also copying the current dataset into the dashboard model.

-You can then use the panel as a data source for other panels, by using the inbuilt `-- Dashboard --` data source to pull the datagrid data.
-This allows for an interactive dashboard experience, where you can modify the data and see the changes reflected in other panels.
+You can then use the panel as a data source for other panels, by using the inbuilt `-- Dashboard --` data source to pull the datagrid data. This allows for an interactive dashboard experience, where you can modify the data and see the changes reflected in other panels.

 Learn more about the inbuilt `-- Grafana --` and `-- Dashboard --` data sources in the [special data sources](ref:special-data-sources) documentation.

@@ -62,9 +65,13 @@ Deleting a row or column will remove the data from the datagrid, while clearing

 You can also access a header menu by clicking the dropdown icon next to the header title. From here, you can not only delete or clear a column, but also rename it, freeze it, or convert the field type of the column.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-datagrid-header-menu-v12.0.png" alt="Datagrid header menu" max-width="400px" >}}
+{{< figure src="/media/docs/datagrid/screenshot-grafana-datagrid-header-menu-2.png" alt="Datagrid header menu" max-width="500px" >}}

-## Use datagrids
+## Selecting series
+
+If there are multiple series, you can set the datagrid to display the preferred dataset using the **Select series** dropdown in the panel options.
+
+## Using datagrids

 Datagrids offer various ways of interacting with your data. You can add, edit, move, clear, and remove rows and columns; use the inbuilt search functionality to find specific data; and convert field types or freeze horizontal scroll on a specific column.

@@ -72,7 +79,7 @@ Datagrids offer various ways of interacting with your data. You can add, edit, m

 You can add data to a datagrid by creating a new column or row.

-To create a new column, follow these steps:
+To create a new column, take the following steps:

 1. In an existing panel, click the **+** button in the table header after the last column.
 1. When prompted, add a name for the new column.
@@ -84,7 +91,7 @@ To add a new row, click a **+** button after the last row. The button is present

 ### Edit data

-To edit data, follow these steps:
+You can edit data by taking the following steps:

 1. Double-click on the cell that needs to be modified. This will activate the cell and allow you to edit the data.
 1. After editing the data, click anywhere outside the cell or press the Enter key to finalize the edit.
@@ -95,7 +102,7 @@ To easily clear a cell of data, you can click on a cell to focus it and then pre

 You can move columns and rows as needed.

-To move a column, follow these steps:
+To move a column, take the following steps:

 1. Click and hold the header of the column that needs to be moved.
 1. Drag the column to the desired location.
@@ -109,7 +116,7 @@ You can select multiple cells by clicking on a single cell and dragging the mous

 ### Delete/clear multiple rows or columns

-To delete or clear multiple rows, follow these steps:
+To delete or clear multiple rows, take the following steps:

 1. Hover over the number column (to the left of the first column in the grid) to display row checkbox.
 1. Select the checkboxes for the rows you want to work with.
@@ -119,16 +126,8 @@ To delete or clear multiple rows, follow these steps:

 The same rules apply to columns by clicking the column headers.

-To delete all rows, use the select all checkbox at the top left corner of the datagrid. This selects all rows and allows you to delete them using the context menu.
+To delete all rows, use the "select all" checkbox at the top left corner of the datagrid. This selects all rows and allows you to delete them using the context menu.

-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Datagrid options
-
-If there are multiple series, you can choose the dataset the datagrid displays using the **Select series** option.
@@ -15,12 +15,6 @@ labels:
 description: Configure options for Grafana's flame graph visualization
 title: Flame graph
 weight: 100
-refs:
-  units:
-    - pattern: /docs/grafana/
-      destination: /docs/grafana/<GRAFANA_VERSION>/panels-visualizations/configure-standard-options/#unit
-    - pattern: /docs/grafana-cloud/
-      destination: /docs/grafana-cloud/visualizations/panels-visualizations/configure-standard-options/unit
 ---

 # Flame graph
@@ -29,7 +23,7 @@ Flame graphs let you visualize [profiling](https://grafana.com/docs/pyroscope/la

 For example, if you want to understand which parts of a program consume the most resources, such as CPU time, memory, or I/O operations, you can use a flame graph to visualize and analyze where potential performance issues are:

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-dark-v12.0.png" max-width="750px" alt="A flame graph visualization for a system profile with both flame graph and top table mode." >}}
+{{< figure src="/static/img/docs/flame-graph-panel/flame-graph-dark-mode.png" max-width="1025px" alt="A flame graph visualization for a system profile with both flame graph and top table mode." >}}

 You can use a flame graph visualization if you need to:

@@ -75,101 +69,82 @@ The following table is an example of the type of data you need for a flame graph
 | 4     | 1.13 Bil | 1.13 K | compress/gzip.(\*Writer).Write            |
 | 5     | 1.06 Bil | 1.06 K | compress/flat.(\*compressor).write        |

-## Flame graph mode
+## Panel options
+
+{{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Modes
+
+### Flame graph mode

 A flame graph takes advantage of the hierarchical nature of profiling data. It condenses data into a format that allows you to easily see which code paths are consuming the most system resources, such as CPU time, allocated objects, or space when measuring memory. Each block in the flame graph represents a function call in a stack and its width represents its value.

 Grayed-out sections are a set of functions that represent a relatively small value and they are collapsed together into one section for performance reasons.

-{{< figure src="/static/img/docs/flame-graph-panel/flame-graph-mode-dark.png" max-width="700px" alt="A flame graph visualization for a system profile with flame graph mode." >}}
+{{< figure src="/static/img/docs/flame-graph-panel/flame-graph-mode-dark.png" max-width="650px" alt="A flame graph visualization for a system profile with flame graph mode." >}}

 You can hover over a specific function to view a tooltip that shows you additional data about that function, like the function's value, percentage of total value, and the number of samples with that function.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-tooltip-v11.6.png" max-width="700px" alt="A flame graph visualization with a hover tooltip." >}}
+{{< figure src="/media/docs/grafana/panels-visualizations/flamegraph/screenshot-flamegraph-10.1-tooltip.png" max-width="650px" alt="A flame graph visualization with a hover tooltip." >}}

-### Menu actions
+#### Drop-down actions

 You can click a function to show a drop-down menu with additional actions:

- [Focus block](#focus-block)
- [Copy function name](#copy-function-name)
- [Sandwich view](#sandwich-view)
- [Grouping](#grouping)
+- Focus block
+- Copy function name
+- Sandwich view

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-menu-v12.0.png" max-width="700px" alt="A flame graph visualization with drop-down actions." >}}
+{{< figure src="/media/docs/grafana/panels-visualizations/flamegraph/screenshot-flamegraph-10.1-dropdown.png" max-width="650px" alt="A flame graph visualization with drop-down actions." >}}

-#### Focus block
+##### Focus block

 When you click **Focus block**, the block, or function, is set to 100% of the flame graph's width and all its child functions are shown with their widths updated relative to the width of the parent function. This makes it easier to drill down into smaller parts of the flame graph.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-focus-v11.6.png" max-width="700px" alt="A flame graph visualization with focus block action selected." >}}
+{{< figure src="/media/docs/grafana/panels-visualizations/flamegraph/screenshot-flamegraph-10.1-focus.png" max-width="650px" alt="A flame graph visualization with focus block action selected." >}}

-#### Copy function name
+##### Copy function name

 When you click **Copy function name**, the full name of the function that the block represents is copied.

-#### Sandwich view
+##### Sandwich view

 The sandwich view allows you to show the context of the clicked function. It shows all the function's callers on the top and all the callees at the bottom. This shows the aggregated context of the function so if the function exists in multiple places in the flame graph, all the contexts are shown and aggregated in the sandwich view.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-sandwich-v11.6.png" max-width="700px" alt="A flame graph visualization with sandwich view selected.">}}
+{{< figure src="/media/docs/grafana/panels-visualizations/flamegraph/screenshot-flamegraph-10.1-sandwich.png" max-width="650px" alt="A flame graph visualization with sandwich view selected.">}}

-#### Grouping
-
-Under the **Grouping** section of the menu, the following options let you expand and collapse groups of functions:
-
- **Expand group** - Expands the grouped function you've clicked. Displayed if you click a function that's been automatically grouped in the flame graph.
- **Expand all groups** - Expands all grouped functions in the flame graph. Always displayed when you click the graph.
- **Collapse group** - Collapses the expanded function you've clicked. Displayed if you click a function in the flame graph that's been manually expanded.
- **Collapse all groups** - Collapses all expanded functions in the flame graph. Displayed if there are any expanded functions when you click the graph.
-
-### Status bar
+#### Status bar

 The status bar shows metadata about the flame graph and currently applied modifications, like what part of the graph is in focus or what function is shown in sandwich view. Click the **X** in the status bar pill to remove that modification.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-status-v11.6.png" max-width="730px" alt="A flame graph visualization's status bar.">}}
+{{< figure src="/media/docs/grafana/panels-visualizations/flamegraph/screenshot-flamegraph-10.1-status.png" max-width="1025px" alt="A flame graph visualization's status bar.">}}

-## Top table mode
+### Top table mode

 The top table shows the functions from the profile in table format. The table has three columns: symbols, self, and total. The table is sorted by self time by default, but can be reordered by total time or symbol name by clicking the column headers. Each row represents aggregated values for the given function if the function appears in multiple places in the profile.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-toptable-v12.0.png" max-width="700px" alt="Table view">}}
+{{< figure src="/media/docs/grafana/panels-visualizations/flamegraph/screenshot-flamegraph-10.1-table.png" max-width="650px" alt="Table view">}}

 There are also action buttons on the left-most side of each row. The first button searches for the function name while second button shows the sandwich view of the function.

 ## Toolbar

-The following table lists the features of the toolbar:
-
-<!-- prettier-ignore-start -->
-
-| Option | Description |
-| ------ | ----------- |
-| [Search](#search) | Use the search field to find functions with a particular name. All the functions in the flame graph that match the search will remain colored while the rest of the functions appear in gray. |
-| Reset | Reset the flame graph back to its original state from a focus block or sandwich view. The reset icon is only displayed when the flame graph is in one of those two states. |
-| [Color schema picker](#color-schema-picker) | Switch between coloring functions by their value or by their package name to visually tie functions from the same package together. |
-| Grouping | Expand or collapse all groups to show all instances of a function or show the function grouped. |
-| Text align | Align text either to the left or to the right to show more important parts of the function name when it does not fit into the block. |
-| Visualization picker | Choose to show only the flame graph, only table, or both at the same time. |
-
-<!-- prettier-ignore-end -->
-
 ### Search

 You can use the search field to find functions with a particular name. All the functions in the flame graph that match the search will remain colored while the rest of the functions are grayed-out.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-search-v12.0.png" max-width="700px" alt="Searching for a function name in a flame graph visualization.">}}
+{{< figure src="/static/img/docs/flame-graph-panel/flame-graph-search-dark.png" max-width="1025px" alt="Searching for a function name in a flame graph visualization.">}}

 ### Color schema picker

 You can switch between coloring functions by their value or by their package name to visually tie functions from the same package together.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-flamegraph-color-v11.6.png" max-width="700px" alt="Different color scheme" >}}
+![<Different color scheme>](/media/docs/grafana/panels-visualizations/flamegraph/screenshot-flamegraph-10.1-color.png)

-## Configuration options
+### Text align

-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+Align text either to the left or to the right to show more important parts of the function name when it does not fit into the block.

-### Panel options
+### Visualization picker

-{{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+You can choose to show only the flame graph, only table, or both at the same time
@@ -46,7 +46,7 @@ You can use a histogram visualization if you need to:

 ## Configure a histogram visualization

-After you've created a [dashboard](https://grafana.com/docs/grafana/<GRAFANA_VERSION>/dashboards/build-dashboards/create-dashboard/), the following video shows you how to configure a histogram visualization:
+Once you’ve created a [dashboard](https://grafana.com/docs/grafana/<GRAFANA_VERSION>/dashboards/build-dashboards/create-dashboard/), the following video shows you how to configure a histogram visualization:

 {{< youtube id="QfJ480j9-KM" >}}

@@ -92,42 +92,47 @@ The data is converted as follows:

 {{< figure src="/static/img/docs/histogram-panel/histogram-example-height-weight.png" max-width="1025px" alt="A histogram visualization showing the male height and weight distribution" >}}

-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Histogram options
+## Histogram options

 Use the following options to refine your histogram visualization.

-<!-- prettier-ignore-start -->
+### Bucket count

-| Option | Description |
-| ------ | ----------- |
-| Bucket count | Specifies the number of bins used to group your data in the histogram, affecting the granularity of the displayed distribution. Leave this empty for automatic bucket count of 30. |
-| Bucket size | The size of the buckets. Leave this empty for automatic bucket sizing (~10% of the full range). |
-| [Bucket offset](#bucket-offset) | If the first bucket should not start at zero. A non-zero offset has the effect of shifting the aggregation window. |
-| Combine series | This will merge all series and fields into a combined histogram. |
-| Stacking | Controls how multiple series are displayed in the histogram. Choose from the following:<ul><li>**Off** - Series are not stacked, but instead shown side by side.</li><li>**Normal** - Series are stacked on top of each other, showing cumulative values.</li><li>**100%** - Series are stacked to fill 100% of the chart, showing the relative proportion of each series.</li></ul> |
-| Line width | Controls line width of the bars. |
-| Fill opacity | Controls the fill opacity bars. |
-| [Gradient mode](#gradient-mode) | Set the mode of the gradient fill. Fill gradient is based on the line color. |
+Specifies the number of bins used to group your data in the histogram, affecting the granularity of the displayed distribution. Leave this empty for automatic bucket count of 30.

-<!-- prettier-ignore-end -->
+### Bucket size

-#### Bucket offset
+The size of the buckets. Leave this empty for automatic bucket sizing (~10% of the full range).

-If the first bucket should not start at zero, a non-zero offset has the effect of shifting the aggregation window.
+### Bucket offset

-For example, 5-sized buckets that are 0-5, 5-10, 10-15 with a default 0 offset would become 2-7, 7-12, 12-17 with an offset of 2; offsets of 0, 5, or 10, in this case, would effectively do nothing.
+If the first bucket should not start at zero. A non-zero offset has the effect of shifting the aggregation window. For example, 5-sized buckets that are 0-5, 5-10, 10-15 with a default 0 offset would become 2-7, 7-12, 12-17 with an offset of 2; offsets of 0, 5, or 10, in this case, would effectively do nothing. Typically, this option would be used with an explicitly defined bucket size rather than automatic. For this setting to affect, the offset amount should be greater than 0 and less than the bucket size; values outside this range will have the same effect as values within this range.

-Typically, this option would be used with an explicitly defined bucket size rather than automatic. For this setting to affect, the offset amount should be greater than 0 and less than the bucket size; values outside this range have the same effect as values within this range.
+### Combine series

-#### Gradient mode
+This will merge all series and fields into a combined histogram.
+
+### Stacking
+
+Controls how multiple series are displayed in the histogram. Choose from the following:
+
+- **Off** - Series are not stacked, but instead shown side by side.
+- **Normal** - Series are stacked on top of each other, showing cumulative values.
+- **100%** - Series are stacked to fill 100% of the chart, showing the relative proportion of each series.
+
+### Line width
+
+Controls line width of the bars.
+
+### Fill opacity
+
+Controls the fill opacity bars.
+
+### Gradient mode

 Set the mode of the gradient fill. Fill gradient is based on the line color. To change the color, use the standard [color scheme](ref:color-scheme) field option.

@@ -140,30 +145,30 @@ Choose from the following:
 - **Hue** - Gradient color is generated based on the hue of the line color.
 - **Scheme** - The selected [color palette](https://grafana.com/docs/grafana/latest/panels-visualizations/configure-standard-options/#color-scheme) is applied to the histogram bars.

-### Tooltip options
+## Tooltip options

-{{< docs/shared lookup="visualizations/tooltip-options-3.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
+{{< docs/shared lookup="visualizations/tooltip-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Legend options
+## Legend options

 {{< docs/shared lookup="visualizations/legend-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Standard options
+## Standard options

 {{< docs/shared lookup="visualizations/standard-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Data links
+## Data links

 {{< docs/shared lookup="visualizations/datalink-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Value mappings
+## Value mappings

 {{< docs/shared lookup="visualizations/value-mappings-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Thresholds
+## Thresholds

 {{< docs/shared lookup="visualizations/thresholds-options-2.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Field overrides
+## Field overrides

 {{< docs/shared lookup="visualizations/overrides-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
@@ -34,7 +34,7 @@ You can use the news visualization to provide regular news and updates to your u

 ## Configure a news visualization

-After you’ve created a [dashboard](https://grafana.com/docs/grafana/<GRAFANA_VERSION>/dashboards/build-dashboards/create-dashboard/), enter the URL of an RSS in the **URL** field in the **News** section. This visualization type doesn't accept any other queries, and you shouldn't expect to be able to filter or query the RSS feed data in any way using this visualization.
+Once you’ve created a [dashboard](https://grafana.com/docs/grafana/<GRAFANA_VERSION>/dashboards/build-dashboards/create-dashboard/), enter the URL of an RSS in the [URL](#url) field in the **News** section. This visualization type doesn't accept any other queries, and you shouldn't expect to be able to filter or query the RSS feed data in any way using this visualization.

 If you're having trouble loading an RSS feed, you can try rehosting the feed on a different server or using a CORS proxy. A CORS proxy is a tool that allows you to bypass CORS restrictions by making requests to the RSS feed on your behalf. You can find more information about using CORS proxies online.

@@ -44,17 +44,18 @@ If you're unable to display an RSS feed using the news visualization, you can tr

 The news visualization supports RSS and Atom feeds.

-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### News options
+## News options

-Use the following options to refine your news visualization:
+Use the following options to refine your news visualization.

- **URL** - The URL of the RSS or Atom feed.
- **Show image** - Controls if the news social image is displayed beside the text content.
+### URL
+
+The URL of the RSS or Atom feed.
+
+### Show image
+
+Controls if the news social image is displayed beside the text content.
@@ -147,7 +147,7 @@ The **Page size** option lets you paginate the state timeline visualization to l

 ### Tooltip options

-{{< docs/shared lookup="visualizations/tooltip-options-3.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
+{{< docs/shared lookup="visualizations/tooltip-options-1.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}

 ### Standard options

@@ -32,9 +32,9 @@ refs:

 A status history visualization displays data in a way that shows periodic states over time. In a status history, each field or series is rendered as a horizontal row, with multiple boxes showing the different statuses. This provides you with a centralized view for the status of a component or service.

-For example, if you're monitoring the health status of different services, you can use a status history to visualize the different statuses, such as “True” or "False," over time. Each status is represented by a different color:
+For example, if you're monitoring the health status of different services, you can use a status history to visualize the different statuses, such as “OK,” “WARN,” or “BAD,” over time. Each status is represented by a different color:

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-status-history-v11.6.png" max-width="800px" alt="A status history panel showing the health status of different sensors" >}}
+{{< figure src="/static/img/docs/status-history-panel/status-history-example-v8-0.png" max-width="1025px" alt="A status history panel showing the health status of different services" >}}

 {{% admonition type="note" %}}
 A status history is similar to a [state timeline](https://grafana.com/docs/grafana/<GRAFANA_VERSION>/panels-visualizations/visualizations/state-timeline/), but has different [configuration options](#status-history-options). Unlike state timelines, status histories don't merge consecutive values.
@@ -95,55 +95,60 @@ The data is converted as follows:

 {{< figure src="/static/img/docs/status-history-panel/status_history.png" max-width="1025px" alt="A status history panel with two time columns showing the status of two servers" >}}

-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Status history options
+## Status history options

 Use these options to refine the visualization.

-<!-- prettier-ignore-start -->
+### Show values

-| Option | Description                                                                                     |
-| ------ | ----------------------------------------------------------------------------------------------- |
-| Show values  | Controls whether values are rendered inside the state regions. Choose from **Auto**, **Always**, and **Never**. **Auto** renders values if there is sufficient space. |
-| Row height  | Controls the height of boxes. 1 = maximum space and 0 = minimum space. |
-| Column width | Controls the width of boxes. 1 = maximum space and 0 = minimum space. |
-| Page size (enable pagination) | The **Page size** option lets you paginate the status history visualization to limit how many series are visible at once. This is useful when you have many series. |
-| Line width | Controls line width of state regions. |
-| Fill opacity | Controls value alignment inside state regions. |
+Controls whether values are rendered inside the value boxes. Auto will render values if there is sufficient space.

-<!-- prettier-ignore-end -->
+### Row height

-### Legend options
+Controls the height of boxes. 1 = maximum space and 0 = minimum space.

-{{< docs/shared lookup="visualizations/legend-options-2.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
+### Column width

-### Tooltip options
+Controls the width of boxes. 1 = maximum space and 0 = minimum space.

-{{< docs/shared lookup="visualizations/tooltip-options-3.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
+### Line width

-### Standard options
+Controls line width of state regions.
+
+### Fill opacity
+
+Controls the opacity of state regions.
+
+## Legend options
+
+{{< docs/shared lookup="visualizations/legend-options-2.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Tooltip options
+
+{{< docs/shared lookup="visualizations/tooltip-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Standard options

 {{< docs/shared lookup="visualizations/standard-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Data links
+## Data links

 {{< docs/shared lookup="visualizations/datalink-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Value mappings
+## Value mappings

 {{< docs/shared lookup="visualizations/value-mappings-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Thresholds
+{{< figure src="/static/img/docs/v8/value_mappings_side_editor.png" max-width="300px" caption="Value mappings side editor" >}}
+
+## Thresholds

 {{< docs/shared lookup="visualizations/thresholds-options-2.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Field overrides
+## Field overrides

 {{< docs/shared lookup="visualizations/overrides-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
@@ -32,12 +32,11 @@ refs:

 # Text

-Text visualizations let you include text or HTML in your dashboards.
-This can be used to add contextual information and descriptions or embed complex HTML.
+Text visualizations enable you to directly include text or HTML in your dashboards. This can be used to add contextual information and descriptions or embed complex HTML.

-For example, if you want to display important links on your dashboard, you can use a text visualization to add these links:
+For example, if you want to display important links to your dashboard, you can use a text visualization to add these links:

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-text-visualization-v11.6.png" max-width="750px" alt="A text panel showing important links" >}}
+{{< figure src="/static/img/docs/text-panel/text-panel.png" max-width="1025px" alt="A text panel showing important links" >}}

 {{< docs/play title="Text Panel" url="https://play.grafana.org/d/adl33bxy1ih34b/" >}}

@@ -47,25 +46,36 @@ Use a text visualization when you need to:
 - Provide instructions or guidance on how to interpret different panels, configure settings, or take specific actions based on the displayed data.
 - Announce any scheduled maintenance or downtime that might impact your dashboards.

-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Text options
+## Text options

 Use the following options to refine your text visualization.

-<!-- prettier-ignore-start -->
+### Mode

-| Option | Description |
-| ------ | ----------- |
-| Mode | Determines how embedded content appears. Choose from:<ul><li>**Markdown** - Formats the content as [markdown](https://en.wikipedia.org/wiki/Markdown).</li><li>**HTML** - Renders the content as [sanitized](https://github.com/grafana/grafana/blob/main/packages/grafana-data/src/text/sanitize.ts) HTML. If you require more direct control over the output, you can set the [disable_sanitize_html](ref:disable_sanitize_html) flag which enables you to directly enter HTML.</li><li>**Code** - Renders content inside a read-only code editor. [Variables](ref:variables) in the content are expanded for display.</li></ul><p>To allow embedding of iframes and other websites, you need set `allow_embedding = true` in your Grafana `config.ini` or environment variables (depending on your employment).</p> |
-| Language | When you choose **Code** as your text mode, select an appropriate language to apply syntax highlighting to the embedded text. |
-| Show line numbers | Displays line numbers in the panel preview when you choose **Code** as your text mode. |
-| Show mini map | Displays a small outline of the embedded text in the panel preview when you choose **Code** as your text mode. |
+**Mode** determines how embedded content appears.

-<!-- prettier-ignore-end -->
+{{< admonition type="note" >}}
+To allow embedding of iframes and other websites, you need set `allow_embedding = true` in your Grafana `config.ini` or environment variables (depending on your employment).
+{{< /admonition >}}
+
+### Markdown
+
+This option formats the content as [markdown](https://en.wikipedia.org/wiki/Markdown).
+
+### HTML
+
+This setting renders the content as [sanitized](https://github.com/grafana/grafana/blob/main/packages/grafana-data/src/text/sanitize.ts) HTML. If you require more direct control over the output, you can set the
+[disable_sanitize_html](ref:disable_sanitize_html) flag which enables you to directly enter HTML.
+
+### Code
+
+This setting renders content inside a read-only code editor. Select an appropriate language to apply syntax highlighting
+to the embedded text.
+
+## Variables
+
+[Variables](ref:variables) in the content will be expanded for display.
@@ -209,13 +209,168 @@ The following example shows three series: Min, Max, and Value. The Min and Max s

 ### Axis options

-{{< docs/shared lookup="visualizations/axis-options-1.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
+Options under the **Axis** section control how the x- and y-axes are rendered. Some options don't take effect until you click outside of the field option box you're editing. You can also press `Enter`.
+
+| Option                             | Description                                                                                                                                                                                                                                                                                                                                                                      |
+| ---------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| Time zone                          | Set the desired time zones to display along the x-axis.                                                                                                                                                                                                                                                                                                                          |
+| [Placement](#placement)            | Select the placement of the y-axis.                                                                                                                                                                                                                                                                                                                                              |
+| Label                              | Set a y-axis text label. If you have more than one y-axis, then you can assign different labels using an override.                                                                                                                                                                                                                                                               |
+| Width                              | Set a fixed width of the axis. By default, Grafana dynamically calculates the width of an axis. By setting the width of the axis, data with different axes types can share the same display proportions. This setting makes it easier for you to compare more than one graph’s worth of data because the axes aren't shifted or stretched within visual proximity to each other. |
+| Show grid lines                    | Set the axis grid line visibility.<br>                                                                                                                                                                                                                                                                                                                                           |
+| Color                              | Set the color of the axis.                                                                                                                                                                                                                                                                                                                                                       |
+| Show border                        | Set the axis border visibility.                                                                                                                                                                                                                                                                                                                                                  |
+| Scale                              | Set the y-axis values scale.<br>                                                                                                                                                                                                                                                                                                                                                 |
+| Centered zero                      | Set the y-axis so it's centered on zero.                                                                                                                                                                                                                                                                                                                                         |
+| [Soft min](#soft-min-and-soft-max) | Set a soft min to better control the y-axis limits. zero.                                                                                                                                                                                                                                                                                                                        |
+| [Soft max](#soft-min-and-soft-max) | Set a soft max to better control the y-axis limits. zero.                                                                                                                                                                                                                                                                                                                        |
+
+#### Placement
+
+Select the placement of the y-axis. Choose from the following:
+
+- **Auto** - Automatically assigns the y-axis to the series. When there are two or more series with different units, Grafana assigns the left axis to the first unit and the right axis to the units that follow.
+- **Left** - Display all y-axes on the left side.
+- **Right** - Display all y-axes on the right side.
+- **Hidden** - Hide all axes. To selectively hide axes, [Add a field override](ref:add-a-field-override) that targets specific fields.
+
+#### Soft min and soft max
+
+Set a **Soft min** or **soft max** option for better control of y-axis limits. By default, Grafana sets the range for the y-axis automatically based on the dataset.
+
+**Soft min** and **soft max** settings can prevent small variations in the data from being magnified when it's mostly flat. In contrast, hard min and max values help prevent obscuring useful detail in the data by clipping intermittent spikes past a specific point.
+
+To define hard limits of the y-axis, set standard min/max options. For more information, refer to [Configure standard options](ref:configure-standard-options).
+
+![Label example](/static/img/docs/time-series-panel/axis-soft-min-max-7-4.png)

 ### Graph styles options

 The options under the **Graph styles** section let you control the general appearance of the graph, excluding [color](#standard-options).

-{{< docs/shared lookup="visualizations/graph-styles-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+| Option                                      | Description                                                                                                                                                                                                                           |
+| ------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| [Style](#style)                             | Choose whether to display your time-series data as lines, bars, or points.                                                                                                                                                            |
+| [Line interpolation](#line-interpolation)   | Choose how the graph interpolates the series line.                                                                                                                                                                                    |
+| Line width                                  | Set the thickness of the series lines or the outline for bars using the **Line width** slider.                                                                                                                                        |
+| [Fill opacity](#fill-opacity)               | Set the series area fill color using the **Fill opacity** slider.                                                                                                                                                                     |
+| [Gradient mode](#gradient-mode)             | Choose a gradient mode to control the gradient fill, which is based on the series color.                                                                                                                                              |
+| [Line style](#line-style)                   | Choose a solid, dashed, or dotted line style.                                                                                                                                                                                         |
+| [Connect null values](#connect-null-values) | Choose how null values, which are gaps in the data, appear on the graph.                                                                                                                                                              |
+| [Disconnect values](#disconnect-values)     | Choose whether to set a threshold above which values in the data should be disconnected.                                                                                                                                              |
+| [Show points](#show-points)                 | Set whether to show data points to lines or bars.                                                                                                                                                                                     |
+| Point size                                  | Set the size of the points, from 1 to 40 pixels in diameter.                                                                                                                                                                          |
+| [Stack series](#stack-series)               | Set whether Grafana displays series on top of each other.                                                                                                                                                                             |
+| [Bar alignment](#bar-alignment)             | Set the position of the bar relative to a data point.                                                                                                                                                                                 |
+| Bar width factor                            | Set the width of the bar relative to minimum space between data points. A factor of 0.5 means that the bars take up half of the available space between data points. A factor of 1.0 means that the bars take up all available space. |
+
+#### Style
+
+Choose whether to display your time-series data as lines, bars, or points. You can use overrides to combine multiple styles in the same graph. Choose from the following:
+
+![Style modes](/static/img/docs/time-series-panel/style-modes-v9.png)
+
+#### Line interpolation
+
+Choose how the graph interpolates the series line:
+
+- **Linear** - Points are joined by straight lines.
+- **Smooth** - Points are joined by curved lines that smooths transitions between points.
+- **Step before** - The line is displayed as steps between points. Points are rendered at the end of the step.
+- **Step after** - The line is displayed as steps between points. Points are rendered at the beginning of the step.
+
+#### Line width
+
+Set the thickness of the series lines or the outline for bars using the **Line width** slider.
+
+#### Fill opacity
+
+Set the series area fill color using the **Fill opacity** slider.
+
+![Fill opacity examples](/static/img/docs/time-series-panel/fill-opacity.png)
+
+#### Gradient mode
+
+Choose a gradient mode to control the gradient fill, which is based on the series color. To change the color, use the standard color scheme field option. For more information, refer to [Color scheme](ref:color-scheme).
+
+- **None** - No gradient fill. This is the default setting.
+- **Opacity** - An opacity gradient where the opacity of the fill increases as y-axis values increase.
+- **Hue** - A subtle gradient that's based on the hue of the series color.
+- **Scheme** - A color gradient defined by your [Color scheme](ref:color-scheme). This setting is used for the fill area and line. For more information about scheme, refer to [Scheme gradient mode](#scheme-gradient-mode).
+
+Gradient appearance is influenced by the **Fill opacity** setting. The following image shows the **Fill opacity** set to 50.
+
+![Gradient mode examples](/static/img/docs/time-series-panel/gradient-modes-v9.png)
+
+##### Scheme gradient mode
+
+The **Gradient mode** option located under the **Graph styles** section has a mode called **Scheme**. When you enable **Scheme**, the line or bar receives a gradient color defined from the selected **Color scheme**.
+
+###### From thresholds
+
+If the **Color scheme** is set to **From thresholds (by value)** and **Gradient mode** is set to **Scheme**, then the line or bar color changes as it crosses the defined thresholds.
+
+{{< figure src="/static/img/docs/time-series-panel/gradient_mode_scheme_thresholds_line.png" max-width="1200px" alt="Colors scheme: From thresholds" >}}
+
+###### Gradient color schemes
+
+The following image shows a line chart with the **Green-Yellow-Red (by value)** color scheme option selected.
+
+{{< figure src="/static/img/docs/time-series-panel/gradient_mode_scheme_line.png" max-width="1200px" alt="Color scheme: Green-Yellow-Red" >}}
+
+#### Line style
+
+Choose a solid, dashed, or dotted line style:
+
+- **Solid** - Display a solid line. This is the default setting.
+- **Dash** - Display a dashed line. When you choose this option, a list appears for you to select the length and gap (length, gap) for the line dashes. Dash spacing is 10, 10 by default.
+- **Dots** - Display dotted lines. When you choose this option, a list appears for you to select the gap (length = 0, gap) for the dot spacing. Dot spacing is 0, 10 by default.
+
+![Line styles examples](/static/img/docs/time-series-panel/line-styles-examples-v9.png)
+
+{{< docs/shared lookup="visualizations/connect-null-values.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
+
+{{< docs/shared lookup="visualizations/disconnect-values.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
+
+To change the color, use the standard [color scheme](ref:color-scheme) field option.
+
+#### Show points
+
+Set whether to show data points as lines or bars. Choose from the following:
+
+- **Auto** - Grafana determines a point's visibility based on the density of the data. If the density is low, then points appear.
+- **Always** - Show the points regardless of how dense the data set is.
+- **Never** - Don't show points.
+
+#### Stack series
+
+Set whether Grafana stacks or displays series on top of each other. Be cautious when using stacking because it can create misleading graphs. To read more about why stacking might not be the best approach, refer to [The issue with stacking](https://www.data-to-viz.com/caveat/stacking.html). Choose from the following:
+
+- **Off** - Turns off series stacking. When **Off**, all series share the same space in the visualization.
+- **Normal** - Stacks series on top of each other.
+- **100%** - Stack by percentage where all series add up to 100%.
+
+##### Stack series in groups
+
+The stacking group option is only available as an override. For more information about creating an override, refer to [Configure field overrides](ref:configure-field-overrides).
+
+1. Edit the panel and click **Overrides**.
+1. Create a field override for the **Stack series** option.
+1. In stacking mode, click **Normal**.
+1. Name the stacking group in which you want the series to appear.
+
+   The stacking group name option is only available when you create an override.
+
+#### Bar alignment
+
+Set the position of the bar relative to a data point. In the examples below, **Show points** is set to **Always** which makes it easier to see the difference this setting makes. The points don't change, but the bars change in relationship to the points. Choose from the following:
+
+- **Before** ![Bar alignment before icon](/static/img/docs/time-series-panel/bar-alignment-before.png)
+  The bar is drawn before the point. The point is placed on the trailing corner of the bar.
+- **Center** ![Bar alignment center icon](/static/img/docs/time-series-panel/bar-alignment-center.png)
+  The bar is drawn around the point. The point is placed in the center of the bar. This is the default.
+- **After** ![Bar alignment after icon](/static/img/docs/time-series-panel/bar-alignment-after.png)
+  The bar is drawn after the point. The point is placed on the leading corner of the bar.

 ### Standard options

@@ -25,65 +25,53 @@ refs:

 # Trend

-Trend visualizations should be used for datasets that have a sequential, numeric x-field that is not time. Some examples are function graphs, rpm/torque curves, supply/demand relationships, and elevation or heart rate plots along a race course (with x as distance or duration from start).
-
-For example, you could represent engine power and torque versus speed where speed is plotted on the x-axis and power and torque are plotted on the y-axes:
-
-{{< figure src="/media/docs/grafana/screenshot-trend-visualization-v12.0.png" max-width="750px" alt="Trend engine power and torque curves" >}}
+Trend visualizations should be used for datasets that have a sequential, numeric X that is not time. Some examples are function graphs, rpm/torque curves, supply/demand relationships, and elevation or heart rate plots along a race course (with x as distance or duration from start).

 Trend visualizations support all visual styles and options available in the [time series visualization](ref:time-series-visualization) with these exceptions:

 - No annotations or time regions
 - No shared cursor/crosshair
- No multi-timezone x-axis
- No ability to change the dashboard time range using drag-selection
+- No multi-timezone x axis
+- No ability to change the dashboard time range via drag-selection

-## Configuration options
+## X Field selection

-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+Use this option to select a field that contains increasing numeric values.

-### Panel options
+{{< figure src="/media/docs/grafana/screenshot-grafana-10-0-trend-speed-xvalue.png" max-width="750px" caption="Trend x value selection" >}}
+
+For example, you could represent engine power and torque versus speed where speed is plotted on the x axis and power and torque are plotted on the y axes.
+
+{{< figure src="/media/docs/grafana/screenshot-grafana-10-0-trend-panel-new-colors.png" max-width="750px" caption="Trend engine power and torque curves" >}}
+
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### X axis options
-
-In the **X field** option, select a field that contains increasing numeric values.
-
-### Tooltip options
-
-{{< docs/shared lookup="visualizations/tooltip-options-2.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
-
-### Legend options
-
-{{< docs/shared lookup="visualizations/legend-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Graph styles options
-
-The options under the **Graph styles** section let you control the general appearance of the graph, excluding [color](#standard-options).
-
-{{< docs/shared lookup="visualizations/graph-styles-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Axis options
-
-{{< docs/shared lookup="visualizations/axis-options-2.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
-
-### Standard options
+## Standard options

 {{< docs/shared lookup="visualizations/standard-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Data links
+## Legend options
+
+{{< docs/shared lookup="visualizations/legend-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Tooltip options
+
+{{< docs/shared lookup="visualizations/tooltip-options-2.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Data links

 {{< docs/shared lookup="visualizations/datalink-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Value mappings
-
-{{< docs/shared lookup="visualizations/value-mappings-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Thresholds
+## Thresholds

 {{< docs/shared lookup="visualizations/thresholds-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Field overrides
+## Value mappings
+
+{{< docs/shared lookup="visualizations/value-mappings-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+
+## Field overrides

 {{< docs/shared lookup="visualizations/overrides-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
@@ -61,91 +61,44 @@ refs:

 XY charts provide a way to visualize arbitrary x and y values in a graph so that you can easily show the relationship between two variables. XY charts are typically used to create scatter plots. You can also use them to create bubble charts where field values determine the size of each bubble:

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-xy-charts-v11.6.png" max-width="750px" alt="An xy chart showing height weight distribution" >}}
+![An xy chart showing height weight distribution](/media/docs/grafana/panels-visualizations/screenshot-xy-charts-v11.0.png)

 ## Supported data formats

 You can use any type of tabular data with at least two numeric fields in an xy chart. This type of visualization doesn't require time data.

-## Configuration options
-
-{{< docs/shared lookup="visualizations/config-options-intro.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Panel options
+## Panel options

 {{< docs/shared lookup="visualizations/panel-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### XY Chart options
+## XY chart options

-The following options let you control how data is displayed in an xy chart:
+### Series mapping

-<!-- prettier-ignore-start -->
+Set how series data is mapped in the chart.

-| Option | Description |
-| ------ | ----------- |
-| [Series mapping](#series-mapping) | Set how series data is mapped in the chart. Choose from: **Auto** and **Manual**. Depending on your series mapping selection, the **Frame**, **X-field**, and **Y-field** options differ. For information on setting these specific fields, refer to the [Series mapping section](#series-mapping). |
-| Size field | Set which field's values control the size of the points in the chart. This value is relative to the min and max of all the values in the data frame. When you select this option, you can then set the **Min point size** and **Max point size** options. Required in **Manual** mode. |
-| Color field | Set which field's values control the color of the points in the chart. To use the color value options under the **Standard** options, you must set this field. Typically, this field is used when you only have one series displayed in the chart. Required in **Manual** mode. |
-| [Show](#show) | Set how values are represented in the visualization. Choose from: **Points**, **Lines**, or **Both**. |
-| Point size | Set the size of all points in the chart, from one to one hundred pixels in diameter. The default size is five pixels. You can set an [override](ref:configure-field-overrides) to set the pixel size by series (y-field). |
-| Min/Max point size | Use these options to control the minimum or maximum point size when you've set the **Size field** option. You can [override](ref:configure-field-overrides) these options for specific series. |
-| Point shape | Set the shape of the points in the chart. Choose from:<ul><li>**Circle** - The default setting</li><li>**Square** </li></ul> |
-| Point stroke width | The width of the point stroke in pixels. The default is one pixel. |
-| Fill opacity | The opacity of the point fill. The default is 50. |
-| [Line style](#line-style) | Set the style of the lines that connect points. Choose from: **Solid**, **Dash**, or **Dots**. |
-| Line width | The width of the lines that connect points, in pixels. |
+- [Auto](#auto-series-mapping-options) - Automatically generates series from all available data frames (or datasets). You can filter to select only one frame.
+- [Manual](#manual-series-mapping-options) - Explicitly define the series by selecting from available data frames.

-<!-- prettier-ignore-end -->
+Depending on your series mapping selection, the **Frame**, **X-field**, and **Y-field** options differ. The [Auto](#auto-series-mapping-options) and [Manual](#manual-series-mapping-options) series mapping sections describe these different options.

-#### Series mapping
-
-Set how series data is mapped in the chart. Choose from:
-
- **Auto** - Automatically generates series from all available data frames (or datasets). You can filter to select only one frame.
- **Manual** - Explicitly define the series by selecting from available data frames.
-
-Depending on your series mapping selection, the **Frame**, **X-field**, and **Y-field** options differ.
-These options are described in the tabs that follow:
-
-{{< tabs >}}
-{{< tab-content name="Auto series mapping options" >}}
+#### Auto series mapping options

 When you select **Auto** as your series mapping mode, the following options are preconfigured, but you can also define them yourself:

-<!-- prettier-ignore-start -->
+- [Frame](#frame)
+- [X-field](#x-field)
+- [Y-field](#y-field)
+- [Size field](#size-field)
+- [Color field](#color-field)

-| Option | Description |
-| ------ | ----------- |
-| Frame | By default, an xy chart displays all data frames. You can filter to select only one frame. |
-| [X field](#x-field) | Select which field or fields x represents. By default, this is the first number field in each data frame. For an example of this in **Auto** mode, refer to the [X field section](#x-field). |
-| [Y field](#y-field) | After the x-field is set, by default, all the remaining number fields in the data frame are designated as the y-fields. You can use this option to explicitly choose which fields to use for y. For more information on how to use this in **Auto** mode, refer to the [Y field section](#y-field). |
+##### Frame

-<!-- prettier-ignore-end -->
+By default, an xy chart displays all data frames. You can filter to select only one frame.

-{{< /tab-content >}}
-{{< tab-content name="Manual series mapping options" >}}
+##### X-field

-When you select **Manual** as your series mode, you can add, edit, and delete series.
-To manage a series, click the **Series** field; to rename the series, click the series name.
-
-In **Manual** mode, these fields are required:
-
-<!-- prettier-ignore-start -->
-
-| Option | Description |
-| ------ | ----------- |
-| Frame | Select your data frame or dataset. You can add as many frames as you want. |
-| X field | Select which field x represents. |
-| Y field | Select which field y represents. |
-
-<!-- prettier-ignore-end -->
-
-{{< /tab-content >}}
-{{< /tabs >}}
-
-#### X field
-
-In **Auto** series mapping mode, select which field or fields x represents. By default, this is the first number field in each data frame. For example, you enter the following CSV content:
+Select which field or fields x represents. By default, this is the first number field in each data frame. For example, you enter the following CSV content:

 | a   | b   | c   |
 | --- | --- | --- |
@@ -155,85 +108,210 @@ In **Auto** series mapping mode, select which field or fields x represents. By d

 In the resulting chart, the x-field is generated from the values in column "a" unless you define it differently.

-#### Y field
+##### Y-field

-In **Auto** series mapping mode, after the x-field is set, by default, all the remaining number fields in the data frame are designated as the y-fields.
-You can use this option to explicitly choose which fields to use for y.
+After the x-field is set, by default, all the remaining number fields in the data frame are designated as the y-fields. You can use this option to explicitly choose which fields to use for y.

-The series of the chart are generated from the y-fields.
-To make changes to a series in an xy chart, make [overrides](ref:configure-field-overrides) to the y-field.
+The series of the chart are generated from the y-fields. To make changes to a series in an xy chart, make [overrides](ref:configure-field-overrides) to the y-field.

 {{< admonition type=note >}}
-Any field you use in the **Size field** or **Color field** doesn't generate a series.
+Any field you use in the [Size field](#size-field) or [Color field](#color-field) doesn't generate a series.
 {{< /admonition >}}

-You can also use [overrides](ref:configure-field-overrides) to exclude y-fields individually.
-To do so, add an override with the following properties for each y-field you want removed:
+You can also use [overrides](ref:configure-field-overrides) to exclude y-fields individually. To do so, add an override with the following properties for each y-field you want removed:

 - Override type: **Fields with name**
 - Override property: **Series > Hide in area**
 - Area: **Viz**

-#### Show
+##### Size field

-Set how values are represented in the visualization. Choose from:
+Set which field's values control the size of the points in the chart. This value is relative to the min and max of all the values in the data frame.

- **Points** - Display values as points. When you select this option, the **Point size** option is also displayed.
- **Lines** - Add a line between values. When you select this option, the [Line style](#line-style) and **Line width** options are also displayed.
+When you select this option, you can then set the [Min point size](#minmax-point-size) and [Max point size](#minmax-point-size) options.
+
+##### Color field
+
+Set which field's values control the color of the points in the chart. To use the color value options under the Standard options, you must set this field.
+
+Typically, this field is used when you only have one series displayed in the chart.
+
+#### Manual series mapping options
+
+When you select **Manual** as your series mode, you can add, edit, and delete series. To manage a series, click the **Series** field; to rename the series, click the series name.
+
+In **Manual** mode, you must set the following options:
+
+- **Frame** - Select your data frame or dataset. You can add as many frames as you want.
+- **X-field** - Select which field x represents.
+- **Y-field** - Select which field y represents.
+- **Size field** - Select which field controls the size of the points in the chart.
+- **Color field** - Select which field controls the color of the points in the chart.
+
+### Show
+
+Set how values are represented in the visualization.
+
+- **Points** - Display values as points. When you select this option, the [Point size](#point-size) option is also displayed.
+- **Lines** - Add a line between values. When you select this option, the [Line style](#line-style) and [Line width](#line-width) options are also displayed.
 - **Both** - Display both points and lines.

-#### Line style
+### Point size
+
+Set the size of all points in the chart, from one to one hundred pixels in diameter. The default size is five pixels. You can set an [override](ref:configure-field-overrides) to set the pixel size by series (y-field).
+
+### Min/Max point size
+
+Use these options to control the minimum or maximum point size when you've set the **Size field** option. You can [override](ref:configure-field-overrides) these options for specific series.
+
+### Point shape
+
+Set the shape of the points in the chart.
+
+- **Circle** - Display points as circles. This is the default setting.
+- **Square** - Display points as squares.
+
+### Point stroke width
+
+Set the width of the point stroke in pixels. The default is one pixel.
+
+### Fill opacity
+
+Set the opacity of the point fill. The default is 50.
+
+### Line style

 Set the style of the lines that connect points. To change the color, use the standard [Color scheme](ref:color-scheme) field option.

-{{< figure src="/media/docs/grafana/panels-visualizations/screenshot-line-style-options-v11.6.png" max-width="400px" alt="Line style options" >}}
+![Line style option](/static/img/docs/time-series-panel/line-style-option-v9.png)

- **Solid** - Display a solid line. This is the default setting.
- **Dash** - Display a dashed line. When you choose this option, a drop-down list is displayed where you can select the length and gap setting for the line dashes. By default, the length and gap are set to `10, 10`.
- **Dots** - Display dotted lines. When you choose this option, a drop-down list is displayed where you can select dot spacing. By default, the dot spacing is set to `0, 10` (the first number represents dot length, which is always zero).
+- **Solid:** Display a solid line. This is the default setting.
+- **Dash:** Display a dashed line. When you choose this option, a drop-down list is displayed where you can select the length and gap setting for the line dashes. By default, the length and gap are set to `10, 10`.
+- **Dots:** Display dotted lines. When you choose this option, a drop-down list is displayed where you can select dot spacing. By default, the dot spacing is set to `0, 10` (the first number represents dot length, which is always zero).

-### Tooltip options
+### Line width
+
+Set the width of the lines that connect points, in pixels.
+
+## Tooltip options

 Tooltip options control the information overlay that appears when you hover over data points in the visualization.

-<!-- prettier-ignore-start -->
+### Tooltip mode

-| Option       | Description |
-| ------------ | ----------- |
-| Tooltip mode | When you hover your cursor over the visualization, Grafana can display tooltips. Choose how they behave:<ul><li>**Single** - The hover tooltip shows only a single series, the one that you are hovering over on the visualization.</li><li>**Hidden** - Do not display the tooltip when you interact with the visualization.</li></ul> |
-| Max width    | Set the maximum width of the tooltip box. |
+When you hover your cursor over the visualization, Grafana can display tooltips. Choose how tooltips behave.

-<!-- prettier-ignore-end -->
+- **Single -** The hover tooltip shows only a single series, the one that you are hovering over on the visualization.
+- **Hidden -** Do not display the tooltip when you interact with the visualization.

-### Legend options
+Use an override to hide individual series from the tooltip.
+
+### Max width
+
+Set the maximum width of the tooltip box.
+
+### Max height
+
+Set the maximum height of the tooltip box. The default is 600 pixels.
+
+## Legend options

 {{< docs/shared lookup="visualizations/legend-options-1.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Axis options
+## Axis options

-{{< docs/shared lookup="visualizations/axis-options-2.md" source="grafana" version="<GRAFANA_VERSION>" >}}
+Options under the axis category change how the x- and y-axes are rendered. Some options don't take effect until you click outside of the field option box you are editing. You can also or press `Enter`.

-### Standard options
+### Placement (y-axis)
+
+Select the placement of the y-axis.
+
+- **Auto:** Automatically assigns the y-axis to the series. When there are two or more series with different units, Grafana assigns the left axis to the first unit and the right axis to the units that follow.
+- **Left:** Display all y-axes on the left side.
+- **Right:** Display all y-axes on the right side.
+- **Hidden:** Hide all axes.
+
+To selectively hide axes, [Add a field override](ref:add-a-field-override) that targets specific fields.
+
+### Label
+
+Set a y-axis text label. If you have more than one y-axis, then you can assign different labels using an override.
+
+### Width
+
+Set a fixed width of the axis. By default, Grafana dynamically calculates the width of an axis.
+
+By setting the width of the axis, data with different axes types can share the same display proportions. This setting makes it easier for you to compare more than one graph’s worth of data because the axes are not shifted or stretched within visual proximity to each other.
+
+### Show grid lines
+
+Set the axis grid line visibility.
+
+- **Auto:** Automatically show grid lines based on the density of the data.
+- **On:** Always show grid lines.
+- **Off:** Never show grid lines.
+
+### Color
+
+Set the color of the axis.
+
+- **Text:** Set the color based on theme text color.
+- **Series:** Set the color based on the series color.
+
+### Show border
+
+Set the axis border visibility.
+
+### Scale
+
+Set the y-axis values scale.
+
+- **Linear:** Divides the scale into equal parts.
+- **Logarithmic:** Use a logarithmic scale. When you select this option, a list appears for you to choose a binary (base 2) or common (base 10) logarithmic scale.
+- **Symlog:** Use a symmetrical logarithmic scale. When you select this option, a list appears for you to choose a binary (base 2) or common (base 10) logarithmic scale. The linear threshold option allows you to set the threshold at which the scale changes from linear to logarithmic.
+
+### Centered zero
+
+Set the y-axis to be centered on zero.
+
+### Soft min and soft max
+
+Set a **Soft min** or **soft max** option for better control of all axes limits. By default, Grafana sets the range automatically based on the dataset.
+
+**Soft min** and **soft max** settings can prevent small variations in the data from being magnified when it's mostly flat. In contrast, hard min and max values help prevent obscuring useful detail in the data by clipping intermittent spikes past a specific point.
+
+To define hard limits of the axes, set standard min/max options. For more information, refer to [Configure standard options](ref:configure-standard-options).
+
+![Label example](/static/img/docs/time-series-panel/axis-soft-min-max-7-4.png)
+
+### Transform
+
+Use this option to transform the series values without affecting the values shown in the tooltip, context menu, or legend.
+
+- **Negative Y transform:** Flip the results to negative values on the Y axis.
+- **Constant:** Show the first value as a constant line.
+
+{{% admonition type="note" %}}
+The transform option is only available as an override.
+{{% /admonition %}}
+
+{{< docs/shared lookup="visualizations/multiple-y-axes.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+2" >}}
+
+## Standard options

 **Standard options** in the panel editor pane let you change how field data is displayed in your visualizations. When you set a standard option, the change is applied to all fields or series. For more granular control over the display of fields, refer to [Configure field overrides](ref:configure-field-overrides).

 You can customize the following standard options:

 - **Field min/max** - Enable **Field min/max** to have Grafana calculate the min or max of each field individually, based on the minimum or maximum value of the field.
- **Color scheme** - Set single or multiple colors for your entire visualization. To learn more about color schemes, refer to [Configure standard options](ref:configure-standard-options).
+- **Color scheme** - Set single or multiple colors for your entire visualization.

-### Data links
+To learn more, refer to [Configure standard options](ref:configure-standard-options).
+
+## Data links

 {{< docs/shared lookup="visualizations/datalink-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}

-### Value mappings
-
-{{< docs/shared lookup="visualizations/value-mappings-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Thresholds
-
-{{< docs/shared lookup="visualizations/thresholds-options-2.md" source="grafana" version="<GRAFANA_VERSION>" >}}
-
-### Field overrides
+## Field overrides

 {{< docs/shared lookup="visualizations/overrides-options.md" source="grafana" version="<GRAFANA_VERSION>" >}}
@@ -1,54 +0,0 @@
---
-title: Axis options
-comments: |
-  There are three axis options shared files, axis-options-1.md and axis-options-2.md to cover the most common combinations of options. 
-  Using shared files ensures that content remains consistent across visualizations that share the same options and users don't have to figure out which options apply to a specific visualization when reading that content.
-  This file is used in the following visualizations: time series.
---
-
-Options under the **Axis** section control how the x- and y-axes are rendered. Some options don't take effect until you click outside of the field option box you're editing. You can also press `Enter`.
-
-<!-- prettier-ignore-start -->
-
-| Option                             | Description                                                                                                        |
-| ---------------------------------- | ------------------------------------------------------------------------------------------------------------------ |
-| Time zone                          | Set the desired time zones to display along the x-axis. Choose from: **Auto**, **Left**, **Right**, and **Hidden**. |
-| [Placement](#placement)            | Select the placement of the y-axis.                                                                                |
-| Label                              | Set a y-axis text label. If you have more than one y-axis, then you can assign different labels using an override. |
-| Width                              | Set a fixed width for the axis. By default, Grafana dynamically calculates the width of an axis.                   |
-| Show grid lines                    | Set the axis grid line visibility. Choose from: **Auto**, **On**, and **Off**.                                     |
-| Color                              | Set the color of the axis. Choose from:<ul><li>**Text** - Uses panel text color.</li><li>**Series** - Uses the colors of the series.</li></ul> |
-| Show border                        | Set the axis border visibility.                                                                                    |
-| [Scale](#scale)                    | Set the y-axis values scale. Choose from: **Linear**, **Logarithmic**, and **Symlog**.                             |
-| Centered zero                      | Set the y-axis so it's centered on zero.                                                                           |
-| [Soft min](#soft-min-and-soft-max) | Set a soft min to better control the y-axis limits.                                                                |
-| [Soft max](#soft-min-and-soft-max) | Set a soft max to better control the y-axis limits.                                                                |
-
-<!-- prettier-ignore-end -->
-
-#### Placement
-
-Select the placement of the y-axis. Choose from the following:
-
- **Auto** - Automatically assigns the y-axis to the series. When there are two or more series with different units, Grafana assigns the left axis to the first unit and the right axis to the units that follow.
- **Left** - Display all y-axes on the left side.
- **Right** - Display all y-axes on the right side.
- **Hidden** - Hide all axes. To selectively hide axes, [Add a field override](ref:add-a-field-override) that targets specific fields.
-
-#### Scale
-
-Set the y-axis values scale. Choose from:
-
- **Linear** - Divides the scale into equal parts.
- **Logarithmic** - Use a logarithmic scale. When you select this option, a list appears for you to choose a binary (base 2) or common (base 10) logarithmic scale.
- **Symlog** - Use a symmetrical logarithmic scale. When you select this option, a list appears for you to choose a binary (base 2) or common (base 10) logarithmic scale. The linear threshold option allows you to set the threshold at which the scale changes from linear to logarithmic.
-
-#### Soft min and soft max
-
-Set a **Soft min** or **soft max** option for better control of y-axis limits. By default, Grafana sets the range for the y-axis automatically based on the dataset.
-
-**Soft min** and **soft max** settings can prevent small variations in the data from being magnified when it's mostly flat. In contrast, hard min and max values help prevent obscuring useful detail in the data by clipping intermittent spikes past a specific point.
-
-To define hard limits of the y-axis, set standard min/max options. For more information, refer to [Configure standard options](ref:configure-standard-options).
-
-![Label example](/static/img/docs/time-series-panel/axis-soft-min-max-7-4.png)
@@ -1,57 +0,0 @@
---
-title: Axis options
-comments: |
-  There are three axis options shared files, axis-options-1.md and axis-options-2.md to cover the most common combinations of options. 
-  Using shared files ensures that content remains consistent across visualizations that share the same options and users don't have to figure out which options apply to a specific visualization when reading that content.
-  This file is used in the following visualizations: candlestick, trend, xy chart
---
-
-Options under the **Axis** section control how the x- and y-axes are rendered. Some options don't take effect until you click outside of the field option box you're editing. You can also press `Enter`.
-
-<!-- prettier-ignore-start -->
-
-| Option                             | Description       |
-| ---------------------------------- | --------------------------------------------------------------------------------- |
-| [Placement](#placement)            | Select the placement of the y-axis.  Choose from: **Auto**, **Left**, **Right**, and **Hidden**.  |
-| Label                              | Set a y-axis text label. If you have more than one y-axis, then you can assign different labels using an override. |
-| Width                              | Set a fixed width for the axis. By default, Grafana dynamically calculates the width of an axis. |
-| Show grid lines                    | Set the axis grid line visibility. Choose from: **Auto**, **On**, and **Off**. |
-| Color                          | Set the color of the axis. Choose from:<ul><li>**Text** - Uses panel text color.</li><li>**Series** - Uses the colors of the series.</li></ul> |
-| Show border                        | Set the axis border visibility. |
-| [Scale](#scale)                    | Set the y-axis values scale. Choose from: **Linear**, **Logarithmic**, and **Symlog**.  |
-| Centered zero                      | Set the y-axis so it's centered on zero. Applies to the **Linear** or **Symlog** scale options. |
-| [Soft min](#soft-min-and-soft-max) | Set a soft min to better control the y-axis limits. |
-| [Soft max](#soft-min-and-soft-max) | Set a soft max to better control the y-axis limits. |
-
-<!-- prettier-ignore-end -->
-
-#### Placement
-
-Select the placement of the y-axis. Choose from the following:
-
- **Auto** - Automatically assigns the y-axis to the series. When there are two or more series with different units, Grafana assigns the left axis to the first unit and the right axis to the units that follow.
- **Left** - Display all y-axes on the left side.
- **Right** - Display all y-axes on the right side.
- **Hidden** - Hide all axes. To selectively hide axes, [Add a field override](ref:add-a-field-override) that targets specific fields.
-
-#### Scale
-
-Set the y-axis values scale. Choose from:
-
- **Linear** - Divides the scale into equal parts.
- **Logarithmic** - Use a logarithmic scale. If you select this option, in the **Log base** list, choose a binary (base 2) or common (base 10) logarithmic scale.
- **Symlog** - Use a symmetrical logarithmic scale. If you select this option, choose also:
-  - **Log base** - Select a binary (base 2) or common (base 10) logarithmic scale.
-  - **Linear threshold** - Set the threshold at which the scale changes from linear to logarithmic.
-
-#### Soft min and soft max
-
-Set a **Soft min** or **soft max** option for better control of y-axis limits. By default, Grafana sets the range for the y-axis automatically based on the dataset.
-
-**Soft min** and **soft max** settings can prevent small variations in the data from being magnified when it's mostly flat. In contrast, hard min and max values help prevent obscuring useful detail in the data by clipping intermittent spikes past a specific point.
-
-To define hard limits of the y-axis, set standard min/max options. For more information, refer to [Configure standard options](ref:configure-standard-options).
-
-<!--
-
-![Label example](/static/img/docs/time-series-panel/axis-soft-min-max-7-4.png) -->
@@ -1,133 +0,0 @@
---
-title: Graph styles options
-comments: |
-  This file is used in the following visualizations: candlestick, time series.
---
-
-<!-- prettier-start-ignore -->
-
-| Option                                      | Description                                                                                                                                                                                                                           |
-| ------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| [Style](#style)                             | Choose whether to display your time-series data as **Lines**, **Bars**, or **Points**.                                                                                                                                                |
-| [Line interpolation](#line-interpolation)   | Choose how the graph interpolates the series line.                                                                                                                                                                                    |
-| Line width                                  | Set the thickness of the series lines or the outline for bars using the **Line width** slider.                                                                                                                                        |
-| [Fill opacity](#fill-opacity)               | Set the series area fill color using the **Fill opacity** slider.                                                                                                                                                                     |
-| [Gradient mode](#gradient-mode)             | Choose a gradient mode to control the gradient fill, which is based on the series color.                                                                                                                                              |
-| [Line style](#line-style)                   | Choose a solid, dashed, or dotted line style.                                                                                                                                                                                         |
-| [Connect null values](#connect-null-values) | Choose how null values, which are gaps in the data, appear on the graph.                                                                                                                                                              |
-| [Disconnect values](#disconnect-values)     | Choose whether to set a threshold above which values in the data should be disconnected.                                                                                                                                              |
-| [Show points](#show-points)                 | Set whether to show data points to lines or bars.                                                                                                                                                                                     |
-| Point size                                  | Set the size of the points, from 1 to 40 pixels in diameter.                                                                                                                                                                          |
-| [Stack series](#stack-series)               | Set whether Grafana displays series on top of each other.                                                                                                                                                                             |
-| [Bar alignment](#bar-alignment)             | Set the position of the bar relative to a data point.                                                                                                                                                                                 |
-| Bar width factor                            | Set the width of the bar relative to minimum space between data points. A factor of 0.5 means that the bars take up half of the available space between data points. A factor of 1.0 means that the bars take up all available space. |
-
-<!-- prettier-end-ignore -->
-
-#### Style
-
-Choose whether to display your time-series data as **Lines**, **Bars**, or **Points**. You can use overrides to combine multiple styles in the same graph. Choose from the following:
-
-![Style modes](/static/img/docs/time-series-panel/style-modes-v9.png)
-
-#### Line interpolation
-
-Choose how the graph interpolates the series line:
-
- **Linear** - Points are joined by straight lines.
- **Smooth** - Points are joined by curved lines that smooths transitions between points.
- **Step before** - The line is displayed as steps between points. Points are rendered at the end of the step.
- **Step after** - The line is displayed as steps between points. Points are rendered at the beginning of the step.
-
-#### Line width
-
-Set the thickness of the series lines or the outline for bars using the **Line width** slider.
-
-#### Fill opacity
-
-Set the series area fill color using the **Fill opacity** slider.
-
-![Fill opacity examples](/static/img/docs/time-series-panel/fill-opacity.png)
-
-#### Gradient mode
-
-Choose a gradient mode to control the gradient fill, which is based on the series color. To change the color, use the standard color scheme field option. For more information, refer to [Color scheme](ref:color-scheme).
-
- **None** - No gradient fill. This is the default setting.
- **Opacity** - An opacity gradient where the opacity of the fill increases as y-axis values increase.
- **Hue** - A subtle gradient that's based on the hue of the series color.
- **Scheme** - A color gradient defined by your [Color scheme](ref:color-scheme). This setting is used for the fill area and line. For more information about scheme, refer to [Scheme gradient mode](#scheme-gradient-mode).
-
-Gradient appearance is influenced by the **Fill opacity** setting. The following image shows the **Fill opacity** set to 50.
-
-![Gradient mode examples](/static/img/docs/time-series-panel/gradient-modes-v9.png)
-
-##### Scheme gradient mode
-
-The **Gradient mode** option located under the **Graph styles** section has a mode called **Scheme**. When you enable **Scheme**, the line or bar receives a gradient color defined from the selected **Color scheme**.
-
-###### From thresholds
-
-If the **Color scheme** is set to **From thresholds (by value)** and **Gradient mode** is set to **Scheme**, then the line or bar color changes as it crosses the defined thresholds.
-
-{{< figure src="/static/img/docs/time-series-panel/gradient_mode_scheme_thresholds_line.png" max-width="1200px" alt="Colors scheme: From thresholds" >}}
-
-###### Gradient color schemes
-
-The following image shows a line chart with the **Green-Yellow-Red (by value)** color scheme option selected.
-
-{{< figure src="/static/img/docs/time-series-panel/gradient_mode_scheme_line.png" max-width="1200px" alt="Color scheme: Green-Yellow-Red" >}}
-
-#### Line style
-
-Choose a solid, dashed, or dotted line style:
-
- **Solid** - Display a solid line. This is the default setting.
- **Dash** - Display a dashed line. When you choose this option, a list appears for you to select the length and gap (length, gap) for the line dashes. Dash spacing is 10, 10 by default.
- **Dots** - Display dotted lines. When you choose this option, a list appears for you to select the gap (length = 0, gap) for the dot spacing. Dot spacing is 0, 10 by default.
-
-![Line styles examples](/static/img/docs/time-series-panel/line-styles-examples-v9.png)
-
-{{< docs/shared lookup="visualizations/connect-null-values.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
-
-{{< docs/shared lookup="visualizations/disconnect-values.md" source="grafana" version="<GRAFANA_VERSION>" leveloffset="+1" >}}
-
-To change the color, use the standard [color scheme](ref:color-scheme) field option.
-
-#### Show points
-
-Set whether to show data points as lines or bars. Choose from the following:
-
- **Auto** - Grafana determines a point's visibility based on the density of the data. If the density is low, then points appear.
- **Always** - Show the points regardless of how dense the dataset is.
- **Never** - Don't show points.
-
-#### Stack series
-
-Set whether Grafana stacks or displays series on top of each other. Be cautious when using stacking because it can create misleading graphs. To read more about why stacking might not be the best approach, refer to [The issue with stacking](https://www.data-to-viz.com/caveat/stacking.html). Choose from the following:
-
- **Off** - Turns off series stacking. When **Off**, all series share the same space in the visualization.
- **Normal** - Stacks series on top of each other.
- **100%** - Stack by percentage where all series add up to 100%.
-
-##### Stack series in groups
-
-The stacking group option is only available as an override. For more information about creating an override, refer to [Configure field overrides](ref:configure-field-overrides).
-
-1. Edit the panel and click **Overrides**.
-1. Create a field override for the **Stack series** option.
-1. In stacking mode, click **Normal**.
-1. Name the stacking group in which you want the series to appear.
-
-   The stacking group name option is only available when you create an override.
-
-#### Bar alignment
-
-Set the position of the bar relative to a data point. In the examples below, **Show points** is set to **Always** which makes it easier to see the difference this setting makes. The points don't change, but the bars change in relationship to the points. Choose from the following:
-
- **Before** ![Bar alignment before icon](/static/img/docs/time-series-panel/bar-alignment-before.png)
-  The bar is drawn before the point. The point is placed on the trailing corner of the bar.
- **Center** ![Bar alignment center icon](/static/img/docs/time-series-panel/bar-alignment-center.png)
-  The bar is drawn around the point. The point is placed in the center of the bar. This is the default.
- **After** ![Bar alignment after icon](/static/img/docs/time-series-panel/bar-alignment-after.png)
-  The bar is drawn after the point. The point is placed on the leading corner of the bar.
@@ -28,6 +28,6 @@ Choose where to display the legend.
 - **Bottom -** Below the graph.
 - **Right -** To the right of the graph.

-### Width
+#### Width

 Control how wide the legend is when placed on the right side of the visualization. This option is only displayed if you set the legend placement to **Right**.
@@ -1,9 +1,9 @@
 ---
 title: Tooltip options
 comments: |
-  There are three tooltip shared files, tooltip-options-1.md, tooltip-options-2.md, and tooltip-options-3.md, to cover the most common combinations of options. 
-  Using shared files ensures that content remains consistent across visualizations that share the same options and users don't have to figure out which options apply to a specific visualization when reading that content. 
-  This file is used in the following visualizations: bar chart, pie chart
+  There are two tooltip shared files, tooltip-options-1.md and tooltip-options-2.md, to cover the most common combinations of options. 
+  Using two shared files ensures that content remains consistent across visualizations that share the same options and users don't have to figure out which options apply to a specific visualization when reading that content. 
+  This file is used in the following visualizations: bar chart, histogram, pie chart, state timeline, status history
 ---

 Tooltip options control the information overlay that appears when you hover over data points in the visualization.
@@ -1,9 +1,9 @@
 ---
 title: Tooltip options
 comments: |
-  There are three tooltip shared files, tooltip-options-1.md, tooltip-options-2.md, and tooltip-options-3.md, to cover the most common combinations of options. 
-  Using shared files ensures that content remains consistent across visualizations that share the same options and users don't have to figure out which options apply to a specific visualization when reading that content. 
-  This file is used in the following visualizations: time series, trend
+  There are two tooltip shared files, tooltip-options-1.md and tooltip-options-2.md, to cover the most common combinations of options. 
+  Using two shared files ensures that content remains consistent across visualizations that share the same options and users don't have to figure out which options apply to a specific visualization when reading that content. 
+  This file is used in the following visualizations: candlestick, time series, trend
 ---

 Tooltip options control the information overlay that appears when you hover over data points in the visualization.
@@ -1,34 +0,0 @@
---
-title: Tooltip options
-comments: |
-  There are three tooltip shared files, tooltip-options-1.md, tooltip-options-2.md, and tooltip-options-3.md, to cover the most common combinations of options. 
-  Using shared files ensures that content remains consistent across visualizations that share the same options and users don't have to figure out which options apply to a specific visualization when reading that content. 
-  This file is used in the following visualizations: histogram, state timeline, status history
---
-
-Tooltip options control the information overlay that appears when you hover over data points in the visualization.
-
-| Option                                  | Description                                                                                                  |
-| --------------------------------------- | ------------------------------------------------------------------------------------------------------------ |
-| [Tooltip mode](#tooltip-mode)           | When you hover your cursor over the visualization, Grafana can display tooltips. Choose how tooltips behave. |
-| [Values sort order](#values-sort-order) | This option controls the order in which values are listed in a tooltip.                                      |
-| Max width                               | Set the maximum width of the tooltip box.                                                                    |
-| Max height                              | Set the maximum height of the tooltip box. The default is 600 pixels.                                        |
-
-### Tooltip mode
-
-When you hover your cursor over the visualization, Grafana can display tooltips. Choose how tooltips behave.
-
- **Single** - The hover tooltip shows only a single series, the one that you are hovering over on the visualization.
- **All** - The hover tooltip shows all series in the visualization. Grafana highlights the series that you are hovering over in bold in the series list in the tooltip.
- **Hidden** - Do not display the tooltip when you interact with the visualization.
-
-Use an override to hide individual series from the tooltip.
-
-### Values sort order
-
-When you set the **Tooltip mode** to **All**, the **Values sort order** option is displayed. This option controls the order in which values are listed in a tooltip. Choose from the following:
-
- **None** - Grafana automatically sorts the values displayed in a tooltip.
- **Ascending** - Values in the tooltip are listed from smallest to largest.
- **Descending** - Values in the tooltip are listed from largest to smallest.
@@ -1,47 +0,0 @@
-import testDashboard from '../dashboards/DataLinkWithoutSlugTest.json';
-import { e2e } from '../utils';
-
-describe('Dashboard with data links that have no slug', () => {
-  beforeEach(() => {
-    e2e.flows.login(Cypress.env('USERNAME'), Cypress.env('PASSWORD'));
-  });
-
-  it('Should not reload if linking to same dashboard', () => {
-    cy.intercept({
-      pathname: '/api/ds/query',
-    }).as('query');
-
-    e2e.flows.importDashboard(testDashboard, 1000, true);
-    cy.wait('@query');
-
-    e2e.components.Panels.Panel.title('Data links without slug').should('exist');
-
-    e2e.components.DataLinksContextMenu.singleLink().contains('9yy21uzzxypg').click();
-    cy.contains('Loading', { timeout: 500 })
-      .should(() => {}) // prevent test from failing if it does not find loading
-      .then(throwIfLoadingFound);
-    cy.url().should('include', urlShouldContain);
-
-    e2e.components.DataLinksContextMenu.singleLink().contains('dr199bpvpcru').click();
-    cy.contains('Loading', { timeout: 500 })
-      .should(() => {}) // prevent test from failing if it does not find loading
-      .then(throwIfLoadingFound);
-    cy.url().should('include', urlShouldContain);
-
-    e2e.components.DataLinksContextMenu.singleLink().contains('dre33fzyxcrz').click();
-    cy.contains('Loading', { timeout: 500 })
-      .should(() => {}) // prevent test from failing if it does not find loading
-      .then(throwIfLoadingFound);
-    cy.url().should('include', urlShouldContain);
-  });
-});
-
-const urlShouldContain = '/d/data-link-no-slug/data-link-without-slug-test';
-
-const throwIfLoadingFound = (el: JQuery) => {
-  if (el.length) {
-    // This means dashboard refreshes when clicking self-referencing data link
-    //  that has no slug in it
-    throw new Error('Should not contain Loading');
-  }
-};
@@ -1,256 +0,0 @@
-{
-  "annotations": {
-    "list": [
-      {
-        "builtIn": 1,
-        "datasource": {
-          "type": "grafana",
-          "uid": "-- Grafana --"
-        },
-        "enable": true,
-        "hide": true,
-        "iconColor": "rgba(0, 211, 255, 1)",
-        "name": "Annotations & Alerts",
-        "type": "dashboard"
-      }
-    ]
-  },
-  "editable": true,
-  "fiscalYearStartMonth": 0,
-  "graphTooltip": 0,
-  "id": 135,
-  "links": [],
-  "panels": [
-    {
-      "datasource": {
-        "type": "grafana-testdata-datasource",
-        "uid": "PD8C576611E62080A"
-      },
-      "fieldConfig": {
-        "defaults": {
-          "color": {
-            "mode": "thresholds"
-          },
-          "custom": {
-            "align": "auto",
-            "cellOptions": {
-              "type": "auto"
-            },
-            "inspect": false
-          },
-          "links": [
-            {
-              "title": "",
-              "url": "/d/${__dashboard.uid}?var-instance=${__data.fields.test1}&${__url_time_range}"
-            }
-          ],
-          "mappings": [],
-          "thresholds": {
-            "mode": "absolute",
-            "steps": [
-              {
-                "color": "green"
-              },
-              {
-                "color": "red",
-                "value": 80
-              }
-            ]
-          }
-        },
-        "overrides": []
-      },
-      "gridPos": {
-        "h": 8,
-        "w": 12,
-        "x": 0,
-        "y": 0
-      },
-      "id": 4,
-      "options": {
-        "cellHeight": "sm",
-        "footer": {
-          "countRows": false,
-          "fields": "",
-          "reducer": ["sum"],
-          "show": false
-        },
-        "showHeader": true
-      },
-      "pluginVersion": "11.6.0-pre",
-      "targets": [
-        {
-          "alias": "test1",
-          "datasource": {
-            "type": "grafana-testdata-datasource",
-            "uid": "PD8C576611E62080A"
-          },
-          "refId": "A",
-          "scenarioId": "csv_metric_values",
-          "stringInput": "9wvfgzurfzb, 9yy21uzzxypg, dr199bpvpcru, dre33fzyxcrz, gc6j7crvrcpf, u6g9zuxvxypv"
-        }
-      ],
-      "title": "Data links without slug",
-      "type": "table"
-    },
-    {
-      "datasource": {
-        "type": "prometheus",
-        "uid": "gdev-prometheus"
-      },
-      "fieldConfig": {
-        "defaults": {
-          "color": {
-            "mode": "palette-classic"
-          },
-          "custom": {
-            "axisBorderShow": false,
-            "axisCenteredZero": false,
-            "axisColorMode": "text",
-            "axisLabel": "",
-            "axisPlacement": "auto",
-            "barAlignment": 0,
-            "barWidthFactor": 0.6,
-            "drawStyle": "line",
-            "fillOpacity": 0,
-            "gradientMode": "none",
-            "hideFrom": {
-              "legend": false,
-              "tooltip": false,
-              "viz": false
-            },
-            "insertNulls": false,
-            "lineInterpolation": "linear",
-            "lineWidth": 1,
-            "pointSize": 5,
-            "scaleDistribution": {
-              "type": "linear"
-            },
-            "showPoints": "auto",
-            "spanNulls": false,
-            "stacking": {
-              "group": "A",
-              "mode": "none"
-            },
-            "thresholdsStyle": {
-              "mode": "off"
-            }
-          },
-          "mappings": [],
-          "thresholds": {
-            "mode": "absolute",
-            "steps": [
-              {
-                "color": "green"
-              },
-              {
-                "color": "red",
-                "value": 80
-              }
-            ]
-          }
-        },
-        "overrides": []
-      },
-      "gridPos": {
-        "h": 8,
-        "w": 12,
-        "x": 12,
-        "y": 0
-      },
-      "id": 3,
-      "options": {
-        "legend": {
-          "calcs": [],
-          "displayMode": "list",
-          "placement": "bottom",
-          "showLegend": true
-        },
-        "tooltip": {
-          "hideZeros": false,
-          "mode": "single",
-          "sort": "none"
-        }
-      },
-      "pluginVersion": "11.6.0-pre",
-      "targets": [
-        {
-          "datasource": {
-            "type": "prometheus",
-            "uid": "gdev-prometheus"
-          },
-          "disableTextWrap": false,
-          "editorMode": "builder",
-          "expr": "counters_logins{geohash=\"$instance\"}",
-          "fullMetaSearch": false,
-          "includeNullMetadata": true,
-          "instant": false,
-          "legendFormat": "__auto",
-          "range": true,
-          "refId": "A",
-          "useBackend": false
-        }
-      ],
-      "title": "Panel Title",
-      "type": "timeseries"
-    }
-  ],
-  "preload": false,
-  "refresh": "",
-  "schemaVersion": 41,
-  "tags": [],
-  "templating": {
-    "list": [
-      {
-        "current": {
-          "text": "9wvfgzurfzb",
-          "value": "9wvfgzurfzb"
-        },
-        "name": "instance",
-        "options": [
-          {
-            "selected": true,
-            "text": "9wvfgzurfzb",
-            "value": "9wvfgzurfzb"
-          },
-          {
-            "selected": false,
-            "text": "9yy21uzzxypg",
-            "value": "9yy21uzzxypg"
-          },
-          {
-            "selected": false,
-            "text": "dr199bpvpcru",
-            "value": "dr199bpvpcru"
-          },
-          {
-            "selected": false,
-            "text": "dre33fzyxcrz",
-            "value": "dre33fzyxcrz"
-          },
-          {
-            "selected": false,
-            "text": "gc6j7crvrcpf",
-            "value": "gc6j7crvrcpf"
-          },
-          {
-            "selected": false,
-            "text": "u6g9zuxvxypv",
-            "value": "u6g9zuxvxypv"
-          }
-        ],
-        "query": "9wvfgzurfzb, 9yy21uzzxypg, dr199bpvpcru, dre33fzyxcrz, gc6j7crvrcpf, u6g9zuxvxypv",
-        "type": "custom"
-      }
-    ]
-  },
-  "time": {
-    "from": "now-1h",
-    "to": "now"
-  },
-  "timepicker": {},
-  "timezone": "utc",
-  "title": "Data Link without slug test",
-  "uid": "data-link-no-slug",
-  "version": 3
-}
@@ -1,6 +1,6 @@
 {
  "name": "@test-plugins/extensions-test-app",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "private": true,
  "scripts": {
    "build": "webpack -c ./webpack.config.ts --env production",
@@ -1,6 +1,6 @@
 {
  "name": "@test-plugins/grafana-e2etest-datasource",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "private": true,
  "scripts": {
    "build": "webpack -c ./webpack.config.ts --env production",
@@ -11,7 +11,7 @@
  "author": "Grafana",
  "license": "Apache-2.0",
  "devDependencies": {
-    "@grafana/plugin-configs": "11.5.4",
+    "@grafana/plugin-configs": "11.5.3",
    "@types/lodash": "4.17.7",
    "@types/node": "22.10.2",
    "@types/prismjs": "1.26.4",
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana

-go 1.24.2
+go 1.23.7

 require (
 	buf.build/gen/go/parca-dev/parca/connectrpc/go v1.17.0-20240902100956-02fd72488966.1 // @grafana/observability-traces-and-profiling
@@ -129,7 +129,7 @@ require (
 	github.com/prometheus/client_model v0.6.1 // @grafana/grafana-backend-group
 	github.com/prometheus/common v0.61.0 // @grafana/alerting-backend
 	github.com/prometheus/prometheus v0.301.0 // @grafana/alerting-backend
-	github.com/redis/go-redis/v9 v9.6.3 // @grafana/alerting-backend
+	github.com/redis/go-redis/v9 v9.6.1 // @grafana/alerting-backend
 	github.com/robfig/cron/v3 v3.0.1 // @grafana/grafana-backend-group
 	github.com/russellhaering/goxmldsig v1.4.0 // @grafana/grafana-backend-group
 	github.com/spf13/cobra v1.8.1 // @grafana/grafana-app-platform-squad
@@ -1307,8 +1307,12 @@ github.com/gogo/status v1.1.1 h1:DuHXlSFHNKqTQ+/ACf5Vs6r4X/dH2EgIzR9Vr+H65kg=
 github.com/gogo/status v1.1.1/go.mod h1:jpG3dM5QPcqu19Hg8lkUhBFBa3TcLs1DG7+2Jqci7oU=
 github.com/golang-jwt/jwt/v4 v4.0.0/go.mod h1:/xlHOz8bRuivTWchD4jCa+NbatV+wEUSzwAxVc6locg=
 github.com/golang-jwt/jwt/v4 v4.5.0/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
+github.com/golang-jwt/jwt/v4 v4.5.1 h1:JdqV9zKUdtaa9gdPlywC3aeoEsR681PlKC+4F5gQgeo=
+github.com/golang-jwt/jwt/v4 v4.5.1/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
 github.com/golang-jwt/jwt/v4 v4.5.2 h1:YtQM7lnr8iZ+j5q71MGKkNw9Mn7AjHM68uc9g5fXeUI=
 github.com/golang-jwt/jwt/v4 v4.5.2/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
+github.com/golang-jwt/jwt/v5 v5.2.1 h1:OuVbFODueb089Lh128TAcimifWaLhJwVflnrgM17wHk=
+github.com/golang-jwt/jwt/v5 v5.2.1/go.mod h1:pqrtFR0X4osieyHYxtmOUWsAWrfe1Q5UVIyoH402zdk=
 github.com/golang-jwt/jwt/v5 v5.2.2 h1:Rl4B7itRWVtYIHFrSNd7vhTiz9UpLdi6gZhZ3wEeDy8=
 github.com/golang-jwt/jwt/v5 v5.2.2/go.mod h1:pqrtFR0X4osieyHYxtmOUWsAWrfe1Q5UVIyoH402zdk=
 github.com/golang-migrate/migrate/v4 v4.7.0 h1:gONcHxHApDTKXDyLH/H97gEHmpu1zcnnbAaq2zgrPrs=
@@ -2142,8 +2146,8 @@ github.com/protocolbuffers/txtpbfmt v0.0.0-20241112170944-20d2c9ebc01d/go.mod h1
 github.com/puzpuzpuz/xsync/v2 v2.5.1 h1:mVGYAvzDSu52+zaGyNjC+24Xw2bQi3kTr4QJ6N9pIIU=
 github.com/puzpuzpuz/xsync/v2 v2.5.1/go.mod h1:gD2H2krq/w52MfPLE+Uy64TzJDVY7lP2znR9qmR35kU=
 github.com/rcrowley/go-metrics v0.0.0-20181016184325-3113b8401b8a/go.mod h1:bCqnVzQkZxMG4s8nGwiZ5l3QUCyqpo9Y+/ZMZ9VjZe4=
-github.com/redis/go-redis/v9 v9.6.3 h1:8Dr5ygF1QFXRxIH/m3Xg9MMG1rS8YCtAgosrsewT6i0=
-github.com/redis/go-redis/v9 v9.6.3/go.mod h1:0C0c6ycQsdpVNQpxb1njEQIqkx5UcsM8FJCQLgE9+RA=
+github.com/redis/go-redis/v9 v9.6.1 h1:HHDteefn6ZkTtY5fGUE8tj8uy85AHk6zP7CpzIAM0y4=
+github.com/redis/go-redis/v9 v9.6.1/go.mod h1:0C0c6ycQsdpVNQpxb1njEQIqkx5UcsM8FJCQLgE9+RA=
 github.com/redis/rueidis v1.0.45 h1:j7hfcqfLLIqgTK3IkxBhXdeJcP34t3XLXvorDLqXfgM=
 github.com/redis/rueidis v1.0.45/go.mod h1:by+34b0cFXndxtYmPAHpoTHO5NkosDlBvhexoTURIxM=
 github.com/remyoudompheng/bigfft v0.0.0-20200410134404-eec4a21b6bb0/go.mod h1:qqbHyh8v60DhA7CoWK5oRCqLrMHRGoxYCSS9EjAz6Eo=
@@ -1,4 +1,4 @@
-go 1.24.2
+go 1.23.7

 // The `skip:golangci-lint` comment tag is used to exclude the package from the `golangci-lint` GitHub Action.
 // The module at the root of the repo (`.`) is excluded because ./pkg/... is included manually in the `golangci-lint` configuration.
@@ -1700,7 +1700,6 @@ github.com/golang-jwt/jwt v3.2.1+incompatible/go.mod h1:8pz2t5EyA70fFQQSrl6XZXzq
 github.com/golang-jwt/jwt/v4 v4.2.0/go.mod h1:/xlHOz8bRuivTWchD4jCa+NbatV+wEUSzwAxVc6locg=
 github.com/golang-jwt/jwt/v4 v4.4.2/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
 github.com/golang-jwt/jwt/v5 v5.0.0/go.mod h1:pqrtFR0X4osieyHYxtmOUWsAWrfe1Q5UVIyoH402zdk=
-github.com/golang-jwt/jwt/v5 v5.2.1/go.mod h1:pqrtFR0X4osieyHYxtmOUWsAWrfe1Q5UVIyoH402zdk=
 github.com/golang/freetype v0.0.0-20170609003504-e2365dfdc4a0 h1:DACJavvAHhabrF08vX0COfcOBJRhZ8lUbR+ZWIs0Y5g=
 github.com/golang/glog v1.1.2/go.mod h1:zR+okUeTbrL6EL3xHUDxZuEtGv04p5shwip1+mL/rLQ=
 github.com/golang/glog v1.2.0/go.mod h1:6AhwSGph0fcJtXVM/PEHPqZlFeoLxhs7/t5UDAwmO+w=
@@ -1712,6 +1711,8 @@ github.com/gomodule/redigo v1.8.9/go.mod h1:7ArFNvsTjH8GMMzB4uy1snslv2BwmginuMs0
 github.com/google/btree v1.0.1/go.mod h1:xXMiIv4Fb/0kKde4SpL7qlzvu5cMJDRkFDxJfI9uaxA=
 github.com/google/btree v1.1.2/go.mod h1:qOPhT0dTNdNzV6Z/lhRX0YXUafgPLFUh+gZMl761Gm4=
 github.com/google/cel-go v0.17.1/go.mod h1:HXZKzB0LXqer5lHHgfWAnlYwJaQBDKMjxjulNQzhwhY=
+github.com/google/cel-go v0.22.1 h1:AfVXx3chM2qwoSbM7Da8g8hX8OVSkBFwX+rz2+PcK40=
+github.com/google/cel-go v0.22.1/go.mod h1:BuznPXXfQDpXKWQ9sPW3TzlAJN5zzFe+i9tIs0yC4s8=
 github.com/google/flatbuffers v23.5.26+incompatible/go.mod h1:1AeVuKshWv4vARoZatz6mlQ0JxURH0Kv5+zNeJKJCa8=
 github.com/google/go-jsonnet v0.18.0 h1:/6pTy6g+Jh1a1I2UMoAODkqELFiVIdOxbNwv0DDzoOg=
 github.com/google/go-jsonnet v0.18.0/go.mod h1:C3fTzyVJDslXdiTqw/bTFk7vSGyCtH3MGRbDfvEwGd0=
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/hack

-go 1.24.2
+go 1.23.7

 require k8s.io/code-generator v0.32.0

@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/kindsv2

-go 1.24.2
+go 1.23.7

 require github.com/grafana/cog v0.0.5

@@ -8,6 +8,8 @@ github.com/davecgh/go-spew v1.1.2-0.20180830191138-d8f796af33cc h1:U9qPSI2PIWSS1
 github.com/davecgh/go-spew v1.1.2-0.20180830191138-d8f796af33cc/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/emicklei/proto v1.13.2 h1:z/etSFO3uyXeuEsVPzfl56WNgzcvIr42aQazXaQmFZY=
 github.com/emicklei/proto v1.13.2/go.mod h1:rn1FgRS/FANiZdD2djyH7TMA9jdRDcYQ9IEN9yvjX0A=
+github.com/expr-lang/expr v1.16.9 h1:WUAzmR0JNI9JCiF0/ewwHB1gmcGw5wW7nWt8gc6PpCI=
+github.com/expr-lang/expr v1.16.9/go.mod h1:8/vRC7+7HBzESEqt5kKpYXxrxkr31SaO8r40VO/1IT4=
 github.com/expr-lang/expr v1.17.0 h1:+vpszOyzKLQXC9VF+wA8cVA0tlA984/Wabc/1hF9Whg=
 github.com/expr-lang/expr v1.17.0/go.mod h1:8/vRC7+7HBzESEqt5kKpYXxrxkr31SaO8r40VO/1IT4=
 github.com/getkin/kin-openapi v0.128.0 h1:jqq3D9vC9pPq1dGcOCv7yOp1DaEe7c/T1vzcLbITSp4=
@@ -1,5 +1,5 @@
 {
  "$schema": "node_modules/lerna/schemas/lerna-schema.json",
  "npmClient": "yarn",
-  "version": "11.5.4"
+  "version": "11.5.3"
 }
@@ -3,7 +3,7 @@
  "license": "AGPL-3.0-only",
  "private": true,
  "name": "grafana",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "repository": "github:grafana/grafana",
  "scripts": {
    "build": "NODE_ENV=production nx exec --verbose -- webpack --config scripts/webpack/webpack.prod.js --progress",
@@ -265,7 +265,6 @@
    "@grafana/flamegraph": "workspace:*",
    "@grafana/google-sdk": "0.1.2",
    "@grafana/lezer-logql": "0.2.6",
-    "@grafana/llm": "0.13.2",
    "@grafana/monaco-logql": "^0.0.7",
    "@grafana/o11y-ds-frontend": "workspace:*",
    "@grafana/prometheus": "workspace:*",
@@ -2,7 +2,7 @@
  "author": "Grafana Labs",
  "license": "Apache-2.0",
  "name": "@grafana/data",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "description": "Grafana Data Library",
  "keywords": [
    "typescript"
@@ -36,7 +36,7 @@
  },
  "dependencies": {
    "@braintree/sanitize-url": "7.0.1",
-    "@grafana/schema": "11.5.4",
+    "@grafana/schema": "11.5.3",
    "@types/d3-interpolate": "^3.0.0",
    "@types/string-hash": "1.1.3",
    "d3-interpolate": "3.0.1",
@@ -1,64 +0,0 @@
-import { PluginMeta, PluginType } from '../types/plugin';
-
-import { matchPluginId } from './matchPluginId';
-
-const createPluginMeta = (id: string, aliasIDs?: string[]): PluginMeta => ({
-  id,
-  name: 'Test Plugin',
-  type: PluginType.datasource,
-  module: 'test',
-  baseUrl: 'test',
-  info: {
-    author: { name: 'Test' },
-    description: 'Test',
-    links: [],
-    logos: { small: '', large: '' },
-    screenshots: [],
-    updated: '',
-    version: '',
-  },
-  aliasIDs,
-});
-
-describe('matchPluginId', () => {
-  it('should match exact plugin ID', () => {
-    const pluginMeta = createPluginMeta('test-plugin');
-    expect(matchPluginId('test-plugin', pluginMeta)).toBe(true);
-  });
-
-  it('should not match different plugin ID', () => {
-    const pluginMeta = createPluginMeta('test-plugin');
-    expect(matchPluginId('different-plugin', pluginMeta)).toBe(false);
-  });
-
-  it('should match Amazon Prometheus flavor when idToMatch is prometheus', () => {
-    const pluginMeta = createPluginMeta('grafana-amazonprometheus-datasource');
-    expect(matchPluginId('prometheus', pluginMeta)).toBe(true);
-  });
-
-  it('should match Azure Prometheus flavor when idToMatch is prometheus', () => {
-    const pluginMeta = createPluginMeta('grafana-azureprometheus-datasource');
-    expect(matchPluginId('prometheus', pluginMeta)).toBe(true);
-  });
-
-  it('should not match non-prometheus flavor when idToMatch is prometheus', () => {
-    const pluginMeta = createPluginMeta('test-plugin');
-    expect(matchPluginId('prometheus', pluginMeta)).toBe(false);
-  });
-
-  it('should match alias IDs', () => {
-    const pluginMeta = createPluginMeta('test-plugin', ['alias1', 'alias2']);
-    expect(matchPluginId('alias1', pluginMeta)).toBe(true);
-    expect(matchPluginId('alias2', pluginMeta)).toBe(true);
-  });
-
-  it('should not match non-existent alias ID', () => {
-    const pluginMeta = createPluginMeta('test-plugin', ['alias1', 'alias2']);
-    expect(matchPluginId('alias3', pluginMeta)).toBe(false);
-  });
-
-  it('should handle undefined aliasIDs', () => {
-    const pluginMeta = createPluginMeta('test-plugin');
-    expect(matchPluginId('alias1', pluginMeta)).toBe(false);
-  });
-});
@@ -5,21 +5,9 @@ export function matchPluginId(idToMatch: string, pluginMeta: PluginMeta) {
    return true;
  }

-  if (isPromFlavor(idToMatch)) {
-    return isPromFlavor(pluginMeta.id);
-  }
-
  if (pluginMeta.aliasIDs) {
    return pluginMeta.aliasIDs.includes(idToMatch);
  }

  return false;
 }
-
-function isPromFlavor(pluginId: string): boolean {
-  if (pluginId === 'prometheus') {
-    return true;
-  }
-  const regex = new RegExp('^grafana-[0-9a-z]+prometheus-datasource$');
-  return regex.test(pluginId);
-}
@@ -2,7 +2,7 @@
  "author": "Grafana Labs",
  "license": "Apache-2.0",
  "name": "@grafana/e2e-selectors",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "description": "Grafana End-to-End Test Selectors Library",
  "keywords": [
    "cli",
@@ -1,7 +1,7 @@
 {
  "name": "@grafana/eslint-plugin",
  "description": "ESLint rules for use within the Grafana repo. Not suitable (or supported) for external use.",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "main": "./index.cjs",
  "author": "Grafana Labs",
  "license": "Apache-2.0",
@@ -2,7 +2,7 @@
  "author": "Grafana Labs",
  "license": "Apache-2.0",
  "name": "@grafana/flamegraph",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "description": "Grafana flamegraph visualization component",
  "keywords": [
    "grafana",
@@ -44,8 +44,8 @@
  ],
  "dependencies": {
    "@emotion/css": "11.13.5",
-    "@grafana/data": "11.5.4",
-    "@grafana/ui": "11.5.4",
+    "@grafana/data": "11.5.3",
+    "@grafana/ui": "11.5.3",
    "@leeoniya/ufuzzy": "1.0.18",
    "d3": "^7.8.5",
    "lodash": "4.17.21",
@@ -1,6 +1,6 @@
 {
  "name": "@grafana/saga-icons",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "private": true,
  "description": "Icons for Grafana",
  "author": "Grafana Labs",
@@ -3,7 +3,7 @@
  "license": "AGPL-3.0-only",
  "name": "@grafana/o11y-ds-frontend",
  "private": true,
-  "version": "11.5.4",
+  "version": "11.5.3",
  "description": "Library to manage traces in Grafana.",
  "sideEffects": false,
  "repository": {
@@ -18,12 +18,12 @@
  },
  "dependencies": {
    "@emotion/css": "11.13.5",
-    "@grafana/data": "11.5.4",
-    "@grafana/e2e-selectors": "11.5.4",
+    "@grafana/data": "11.5.3",
+    "@grafana/e2e-selectors": "11.5.3",
    "@grafana/experimental": "2.1.6",
-    "@grafana/runtime": "11.5.4",
-    "@grafana/schema": "11.5.4",
-    "@grafana/ui": "11.5.4",
+    "@grafana/runtime": "11.5.3",
+    "@grafana/schema": "11.5.3",
+    "@grafana/ui": "11.5.3",
    "react-select": "5.9.0",
    "react-use": "17.6.0",
    "rxjs": "7.8.1",
@@ -2,7 +2,7 @@
  "name": "@grafana/plugin-configs",
  "description": "Shared dependencies and files for core plugins",
  "private": true,
-  "version": "11.5.4",
+  "version": "11.5.3",
  "dependencies": {
    "tslib": "2.8.1"
  },
@@ -2,7 +2,7 @@
  "author": "Grafana Labs",
  "license": "AGPL-3.0-only",
  "name": "@grafana/prometheus",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "description": "Grafana Prometheus Library",
  "keywords": [
    "typescript"
@@ -38,12 +38,12 @@
  "dependencies": {
    "@emotion/css": "11.13.5",
    "@floating-ui/react": "0.27.3",
-    "@grafana/data": "11.5.4",
+    "@grafana/data": "11.5.3",
    "@grafana/experimental": "2.1.6",
    "@grafana/faro-web-sdk": "1.12.2",
-    "@grafana/runtime": "11.5.4",
-    "@grafana/schema": "11.5.4",
-    "@grafana/ui": "11.5.4",
+    "@grafana/runtime": "11.5.3",
+    "@grafana/schema": "11.5.3",
+    "@grafana/ui": "11.5.3",
    "@hello-pangea/dnd": "17.0.0",
    "@leeoniya/ufuzzy": "1.0.18",
    "@lezer/common": "1.2.3",
@@ -76,7 +76,7 @@
  },
  "devDependencies": {
    "@emotion/eslint-plugin": "11.12.0",
-    "@grafana/e2e-selectors": "11.5.4",
+    "@grafana/e2e-selectors": "11.5.3",
    "@grafana/tsconfig": "^2.0.0",
    "@rollup/plugin-image": "3.0.3",
    "@rollup/plugin-node-resolve": "16.0.0",
@@ -2,7 +2,7 @@
  "author": "Grafana Labs",
  "license": "Apache-2.0",
  "name": "@grafana/runtime",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "description": "Grafana Runtime Library",
  "keywords": [
    "grafana",
@@ -37,11 +37,11 @@
    "postpack": "mv package.json.bak package.json"
  },
  "dependencies": {
-    "@grafana/data": "11.5.4",
-    "@grafana/e2e-selectors": "11.5.4",
+    "@grafana/data": "11.5.3",
+    "@grafana/e2e-selectors": "11.5.3",
    "@grafana/faro-web-sdk": "^1.3.6",
-    "@grafana/schema": "11.5.4",
-    "@grafana/ui": "11.5.4",
+    "@grafana/schema": "11.5.3",
+    "@grafana/ui": "11.5.3",
    "history": "4.10.1",
    "lodash": "4.17.21",
    "react-use": "17.6.0",
@@ -2,7 +2,7 @@
  "author": "Grafana Labs",
  "license": "Apache-2.0",
  "name": "@grafana/schema",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "description": "Grafana Schema Library",
  "keywords": [
    "typescript"
@@ -8,7 +8,7 @@
 //
 // Run 'make gen-cue' from repository root to regenerate.

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options {
  limit: number;
@@ -29,37 +29,23 @@ export interface AzureMonitorQuery extends common.DataQuery {
   * Application Insights Traces sub-query properties.
   */
  azureTraces?: AzureTracesQuery;
-  /**
-   * Custom namespace used in template variable queries
-   */
-  customNamespace?: string;
  /**
   * @deprecated Legacy template variable support.
   */
  grafanaTemplateVariableFn?: GrafanaTemplateVariableQuery;
-  /**
-   * Namespace used in template variable queries
-   */
  namespace?: string;
  /**
   * Used only for exemplar queries from Prometheus
   */
  query?: string;
-  /**
-   * Region used in template variable queries
-   */
  region?: string;
-  /**
-   * Resource used in template variable queries
-   */
  resource?: string;
  /**
-   * Resource group used in template variable queries
+   * Template variables params. These exist for backwards compatiblity with legacy template variables.
   */
  resourceGroup?: string;
  /**
   * Azure subscription containing the resource(s) to be queried.
-   * Also used for template variable queries
   */
  subscription?: string;
  /**
@@ -79,8 +65,6 @@ export enum AzureQueryType {
  AzureMonitor = 'Azure Monitor',
  AzureResourceGraph = 'Azure Resource Graph',
  AzureTraces = 'Azure Traces',
-  CustomMetricNamesQuery = 'Azure Custom Metric Names',
-  CustomNamespacesQuery = 'Azure Custom Namespaces',
  GrafanaTemplateVariableFn = 'Grafana Template Variable Function',
  LocationsQuery = 'Azure Regions',
  LogAnalytics = 'Azure Log Analytics',
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options extends common.OptionsWithLegend, common.OptionsWithTooltip, common.OptionsWithTextFormatting {
  /**
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options extends common.OptionsWithLegend, common.SingleStatBaseOptions {
  displayMode: common.BarGaugeDisplayMode;
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export enum VizDisplayMode {
  Candles = 'candles',
@@ -10,7 +10,7 @@

 import * as ui from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export enum HorizontalConstraint {
  Center = 'center',
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface MetricStat {
  /**
@@ -8,7 +8,7 @@
 //
 // Run 'make gen-cue' from repository root to regenerate.

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options {
  /**
@@ -8,7 +8,7 @@
 //
 // Run 'make gen-cue' from repository root to regenerate.

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options {
  selectedSeries: number;
@@ -8,7 +8,7 @@
 //
 // Run 'make gen-cue' from repository root to regenerate.

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export type UpdateConfig = {
  render: boolean,
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export type BucketAggregation = (DateHistogram | Histogram | Terms | Filters | GeoHashGrid | Nested);

@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options extends common.SingleStatBaseOptions {
  minVizHeight: number;
@@ -10,7 +10,7 @@

 import * as ui from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options {
  basemap: ui.MapLayerOptions;
@@ -10,7 +10,7 @@

 import * as ui from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 /**
 * Controls the color mode of the heatmap
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options extends common.OptionsWithLegend, common.OptionsWithTooltip {
  /**
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options {
  dedupStrategy: common.LogsDedupStrategy;
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export enum QueryEditorMode {
  Builder = 'builder',
@@ -8,7 +8,7 @@
 //
 // Run 'make gen-cue' from repository root to regenerate.

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options {
  /**
@@ -8,7 +8,7 @@
 //
 // Run 'make gen-cue' from repository root to regenerate.

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface ArcOption {
  /**
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 /**
 * Select the pie chart display style.
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options extends common.SingleStatBaseOptions {
  colorMode: common.BigValueColorMode;
@@ -10,7 +10,7 @@

 import * as ui from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options extends ui.OptionsWithLegend, ui.OptionsWithTooltip, ui.OptionsWithTimezones {
  /**
@@ -10,7 +10,7 @@

 import * as ui from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options extends ui.OptionsWithLegend, ui.OptionsWithTooltip, ui.OptionsWithTimezones {
  /**
@@ -10,7 +10,7 @@

 import * as ui from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options {
  /**
@@ -8,7 +8,7 @@
 //
 // Run 'make gen-cue' from repository root to regenerate.

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export enum TextMode {
  Code = 'code',
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export interface Options extends common.OptionsWithTimezones {
  legend: common.VizLegendOptions;
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 /**
 * Identical to timeseries... except it does not have timezone settings
@@ -10,7 +10,7 @@

 import * as common from '@grafana/schema';

-export const pluginVersion = "11.5.4";
+export const pluginVersion = "11.5.3";

 export enum PointShape {
  Circle = 'circle',
@@ -3,7 +3,7 @@
  "license": "AGPL-3.0-only",
  "private": true,
  "name": "@grafana/sql",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "repository": {
    "type": "git",
    "url": "http://github.com/grafana/grafana.git",
@@ -15,11 +15,11 @@
  },
  "dependencies": {
    "@emotion/css": "11.13.5",
-    "@grafana/data": "11.5.4",
-    "@grafana/e2e-selectors": "11.5.4",
+    "@grafana/data": "11.5.3",
+    "@grafana/e2e-selectors": "11.5.3",
    "@grafana/experimental": "2.1.6",
-    "@grafana/runtime": "11.5.4",
-    "@grafana/ui": "11.5.4",
+    "@grafana/runtime": "11.5.3",
+    "@grafana/ui": "11.5.3",
    "@react-awesome-query-builder/ui": "6.6.4",
    "immutable": "5.0.3",
    "lodash": "4.17.21",
@@ -2,7 +2,7 @@
  "author": "Grafana Labs",
  "license": "Apache-2.0",
  "name": "@grafana/ui",
-  "version": "11.5.4",
+  "version": "11.5.3",
  "description": "Grafana Components Library",
  "keywords": [
    "grafana",
@@ -50,10 +50,10 @@
    "@emotion/react": "11.14.0",
    "@emotion/serialize": "1.3.3",
    "@floating-ui/react": "0.27.3",
-    "@grafana/data": "11.5.4",
-    "@grafana/e2e-selectors": "11.5.4",
+    "@grafana/data": "11.5.3",
+    "@grafana/e2e-selectors": "11.5.3",
    "@grafana/faro-web-sdk": "^1.3.6",
-    "@grafana/schema": "11.5.4",
+    "@grafana/schema": "11.5.3",
    "@hello-pangea/dnd": "17.0.0",
    "@leeoniya/ufuzzy": "1.0.18",
    "@monaco-editor/react": "4.6.0",
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/pkg/aggregator

-go 1.24.2
+go 1.23.7

 require (
 	github.com/emicklei/go-restful/v3 v3.11.0
@@ -97,6 +97,8 @@ github.com/goccy/go-json v0.10.4/go.mod h1:oq7eo15ShAhp70Anwd5lgX2pLfOS3QCiwU/PU
 github.com/godbus/dbus/v5 v5.0.4/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
 github.com/gogo/protobuf v1.3.2 h1:Ov1cvc58UF3b5XjBnZv7+opcTcQFZebYjWzi34vdm4Q=
 github.com/gogo/protobuf v1.3.2/go.mod h1:P1XiOD3dCwIKUDQYPy72D8LYyHL2YPYrpS2s69NZV8Q=
+github.com/golang-jwt/jwt/v4 v4.5.1 h1:JdqV9zKUdtaa9gdPlywC3aeoEsR681PlKC+4F5gQgeo=
+github.com/golang-jwt/jwt/v4 v4.5.1/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
 github.com/golang-jwt/jwt/v4 v4.5.2 h1:YtQM7lnr8iZ+j5q71MGKkNw9Mn7AjHM68uc9g5fXeUI=
 github.com/golang-jwt/jwt/v4 v4.5.2/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
 github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b/go.mod h1:SBH7ygxi8pfUlaOkMMuAQtPIUF8ecWP5IEl/CR7VP2Q=
@@ -16,22 +16,20 @@ var logger = log.New("datasource")

 // requiredURL contains the set of data sources that require a URL.
 var requiredURL = map[string]bool{
-	datasources.DS_GRAPHITE:          true,
-	datasources.DS_INFLUXDB:          true,
-	datasources.DS_INFLUXDB_08:       true,
-	datasources.DS_ES:                true,
-	datasources.DS_PROMETHEUS:        true,
-	datasources.DS_AMAZON_PROMETHEUS: true,
-	datasources.DS_AZURE_PROMETHEUS:  true,
-	datasources.DS_ALERTMANAGER:      true,
-	datasources.DS_JAEGER:            true,
-	datasources.DS_LOKI:              true,
-	datasources.DS_OPENTSDB:          true,
-	datasources.DS_TEMPO:             true,
-	datasources.DS_ZIPKIN:            true,
-	datasources.DS_MYSQL:             true,
-	datasources.DS_POSTGRES:          true,
-	datasources.DS_MSSQL:             true,
+	datasources.DS_GRAPHITE:     true,
+	datasources.DS_INFLUXDB:     true,
+	datasources.DS_INFLUXDB_08:  true,
+	datasources.DS_ES:           true,
+	datasources.DS_PROMETHEUS:   true,
+	datasources.DS_ALERTMANAGER: true,
+	datasources.DS_JAEGER:       true,
+	datasources.DS_LOKI:         true,
+	datasources.DS_OPENTSDB:     true,
+	datasources.DS_TEMPO:        true,
+	datasources.DS_ZIPKIN:       true,
+	datasources.DS_MYSQL:        true,
+	datasources.DS_POSTGRES:     true,
+	datasources.DS_MSSQL:        true,
 }

 // URLValidationError represents an error from validating a data source URL.
@@ -546,7 +546,7 @@ func (hs *HTTPServer) getFSDataSources(c *contextmodel.ReqContext, availablePlug
 			dsDTO.Database = ds.Database
 		}

-		if ds.Type == datasources.DS_PROMETHEUS || ds.Type == datasources.DS_AMAZON_PROMETHEUS || ds.Type == datasources.DS_AZURE_PROMETHEUS {
+		if ds.Type == datasources.DS_PROMETHEUS {
 			// add unproxied server URL for link to Prometheus web UI
 			ds.JsonData.Set("directUrl", ds.URL)
 		}
@@ -331,7 +331,7 @@ func (proxy *DataSourceProxy) validateRequest() error {
 	}

 	// Trailing validation below this point for routes that were not matched
-	if proxy.ds.Type == datasources.DS_PROMETHEUS || proxy.ds.Type == datasources.DS_AMAZON_PROMETHEUS || proxy.ds.Type == datasources.DS_AZURE_PROMETHEUS {
+	if proxy.ds.Type == datasources.DS_PROMETHEUS {
 		if proxy.ctx.Req.Method == "DELETE" {
 			return errors.New("non allow-listed DELETEs not allowed on proxied Prometheus datasource")
 		}
@@ -159,17 +159,16 @@ func staticHandler(ctx *web.Context, log log.Logger, opt StaticOptions) bool {
 	if fi.IsDir() {
 		// Redirect if missing trailing slash.
 		if !strings.HasSuffix(ctx.Req.URL.Path, "/") {
-			redirectPath := path.Clean(ctx.Req.URL.Path)
-			redirectPath = fmt.Sprintf("%s/", redirectPath)
-			if !strings.HasPrefix(redirectPath, "/") {
+			path := fmt.Sprintf("%s/", ctx.Req.URL.Path)
+			if !strings.HasPrefix(path, "/") {
 				// Disambiguate that it's a path relative to this server
-				redirectPath = fmt.Sprintf("/%s", redirectPath)
+				path = fmt.Sprintf("/%s", path)
 			} else {
 				// A string starting with // or /\ is interpreted by browsers as a URL, and not a server relative path
 				rePrefix := regexp.MustCompile(`^(?:/\\|/+)`)
-				redirectPath = rePrefix.ReplaceAllString(redirectPath, "/")
+				path = rePrefix.ReplaceAllString(path, "/")
 			}
-			http.Redirect(ctx.Resp, ctx.Req, redirectPath, http.StatusFound)
+			http.Redirect(ctx.Resp, ctx.Req, path, http.StatusFound)
 			return true
 		}

@@ -1,174 +0,0 @@
-package httpstatic
-
-import (
-	"io"
-	"net/http"
-	"net/http/httptest"
-	"os"
-	"path/filepath"
-	"testing"
-
-	claims "github.com/grafana/authlib/types"
-	"github.com/grafana/grafana/pkg/models/usertoken"
-	"github.com/grafana/grafana/pkg/services/authn"
-	"github.com/grafana/grafana/pkg/services/authn/authntest"
-	"github.com/grafana/grafana/pkg/services/contexthandler"
-	"github.com/grafana/grafana/pkg/services/featuremgmt"
-	"github.com/grafana/grafana/pkg/setting"
-	"github.com/grafana/grafana/pkg/web"
-	"github.com/stretchr/testify/assert"
-	"github.com/stretchr/testify/require"
-)
-
-func TestStatic(t *testing.T) {
-	// Create a temporary directory for test files
-	tmpDir, err := os.MkdirTemp("", "static-test")
-	require.NoError(t, err)
-	defer os.RemoveAll(tmpDir)
-
-	// Create test files
-	testFiles := map[string]string{
-		"test.txt":        "Test content",
-		"subdir/test.txt": "Subdir content",
-	}
-
-	for path, content := range testFiles {
-		fullPath := filepath.Join(tmpDir, path)
-		err := os.MkdirAll(filepath.Dir(fullPath), 0o755)
-		require.NoError(t, err)
-		err = os.WriteFile(fullPath, []byte(content), 0o644)
-		require.NoError(t, err)
-	}
-
-	tests := []struct {
-		dir              string
-		name             string
-		path             string
-		options          StaticOptions
-		expectedStatus   int
-		expectedBody     string
-		expectedLocation string
-	}{
-		{
-			name:           "should serve existing file",
-			path:           "/test.txt",
-			expectedStatus: http.StatusOK,
-			expectedBody:   "Test content",
-			dir:            tmpDir,
-		},
-		{
-			name:           "should serve file from subdirectory",
-			path:           "/subdir/test.txt",
-			expectedStatus: http.StatusOK,
-			expectedBody:   "Subdir content",
-			dir:            tmpDir,
-		},
-
-		{
-			name:             "should redirect directory without trailing slash",
-			path:             "/subdir",
-			expectedStatus:   http.StatusFound,
-			expectedLocation: "/subdir/",
-			dir:              tmpDir,
-		},
-		{
-			name:           "should handle prefix",
-			path:           "/static/test.txt",
-			options:        StaticOptions{Prefix: "/static"},
-			expectedStatus: http.StatusOK,
-			expectedBody:   "Test content",
-			dir:            tmpDir,
-		},
-		{
-			name:           "should handle excluded path",
-			path:           "/test.txt",
-			options:        StaticOptions{Exclude: []string{"/test.txt"}},
-			expectedStatus: http.StatusNotFound,
-			dir:            tmpDir,
-		},
-		{
-			name:           "should add custom headers",
-			path:           "/test.txt",
-			options:        StaticOptions{AddHeaders: func(ctx *web.Context) { ctx.Resp.Header().Set("X-Test", "test") }},
-			expectedStatus: http.StatusOK,
-			expectedBody:   "Test content",
-			dir:            tmpDir,
-		},
-		{
-			name:             "should clean up path before redirecting",
-			path:             "/subdir/..%2F%5C127.0.0.1:80%2F%3F%2F..%2F..",
-			options:          StaticOptions{Prefix: "subdir"},
-			expectedStatus:   http.StatusFound,
-			expectedLocation: "/",
-			dir:              tmpDir,
-		},
-	}
-
-	for _, tt := range tests {
-		t.Run(tt.name, func(t *testing.T) {
-			sc := setupScenarioContext(t, "")
-			sc.m.Use(Static(tt.dir, tt.options))
-
-			// Create a test request
-			req := httptest.NewRequest("GET", tt.path, nil)
-			w := httptest.NewRecorder()
-
-			// Execute the handler
-			sc.m.ServeHTTP(w, req)
-
-			// Verify the response
-			resp := w.Result()
-			require.Equal(t, tt.expectedStatus, resp.StatusCode)
-
-			if tt.expectedBody != "" {
-				body, err := io.ReadAll(resp.Body)
-				require.NoError(t, err)
-				assert.Equal(t, tt.expectedBody, string(body))
-			}
-
-			if tt.options.AddHeaders != nil {
-				assert.Equal(t, "test", resp.Header.Get("X-Test"))
-			}
-
-			if tt.expectedLocation != "" {
-				assert.Equal(t, tt.expectedLocation, resp.Header.Get("Location"))
-			}
-		})
-	}
-}
-
-type scenarioContext struct {
-	t       *testing.T
-	cfg     *setting.Cfg
-	m       *web.Mux
-	ctxHdlr *contexthandler.ContextHandler
-}
-
-func getContextHandler(t *testing.T, cfg *setting.Cfg) *contexthandler.ContextHandler {
-	t.Helper()
-
-	if cfg == nil {
-		cfg = setting.NewCfg()
-	}
-
-	return contexthandler.ProvideService(
-		cfg,
-		&authntest.FakeService{ExpectedIdentity: &authn.Identity{ID: "0", Type: claims.TypeAnonymous, SessionToken: &usertoken.UserToken{}}},
-		featuremgmt.WithFeatures(),
-	)
-}
-
-func setupScenarioContext(t *testing.T, url string) *scenarioContext {
-	cfg := setting.NewCfg()
-	ctxHdlr := getContextHandler(t, cfg)
-	sc := &scenarioContext{
-		t:       t,
-		cfg:     cfg,
-		ctxHdlr: ctxHdlr,
-	}
-
-	sc.m = web.New()
-	sc.m.Use(ctxHdlr.Middleware)
-
-	return sc
-}
@@ -89,11 +89,11 @@ func (hs *HTTPServer) RotateUserAuthTokenRedirect(c *contextmodel.ReqContext) re
 		return response.Redirect(hs.GetRedirectURL(c))
 	}

-	redirectTo := hs.Cfg.AppSubURL + c.Query("redirectTo")
+	redirectTo := c.Query("redirectTo")
 	if err := hs.ValidateRedirectTo(redirectTo); err != nil {
 		return response.Redirect(hs.Cfg.AppSubURL + "/")
 	}
-	return response.Redirect(redirectTo)
+	return response.Redirect(hs.Cfg.AppSubURL + redirectTo)
 }

 // swagger:route POST /user/auth-tokens/rotate
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/pkg/apimachinery

-go 1.24.2
+go 1.23.7

 require (
 	github.com/grafana/authlib v0.0.0-20250108202437-7a039176d884 // @grafana/identity-access-team
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/pkg/apiserver

-go 1.24.2
+go 1.23.7

 require (
 	github.com/google/go-cmp v0.6.0
@@ -53,6 +53,8 @@ github.com/go-task/slim-sprig/v3 v3.0.0/go.mod h1:W848ghGpv3Qj3dhTPRyJypKRiqCdHZ
 github.com/godbus/dbus/v5 v5.0.4/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
 github.com/gogo/protobuf v1.3.2 h1:Ov1cvc58UF3b5XjBnZv7+opcTcQFZebYjWzi34vdm4Q=
 github.com/gogo/protobuf v1.3.2/go.mod h1:P1XiOD3dCwIKUDQYPy72D8LYyHL2YPYrpS2s69NZV8Q=
+github.com/golang-jwt/jwt/v4 v4.5.1 h1:JdqV9zKUdtaa9gdPlywC3aeoEsR681PlKC+4F5gQgeo=
+github.com/golang-jwt/jwt/v4 v4.5.1/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
 github.com/golang-jwt/jwt/v4 v4.5.2 h1:YtQM7lnr8iZ+j5q71MGKkNw9Mn7AjHM68uc9g5fXeUI=
 github.com/golang-jwt/jwt/v4 v4.5.2/go.mod h1:m21LjoU+eqJr34lmDMbreY2eSTRJ1cv77w39/MY0Ch0=
 github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b/go.mod h1:SBH7ygxi8pfUlaOkMMuAQtPIUF8ecWP5IEl/CR7VP2Q=
@@ -1,6 +1,6 @@
 module github.com/grafana/grafana/pkg/build

-go 1.24.2
+go 1.23.7

 // Override docker/docker to avoid:
 // go: github.com/drone-runners/drone-runner-docker@v1.8.2 requires
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
nmarrs	36b131b1b7	backport commit	2025-04-07 09:27:14 -05:00
Yuri Tseretyan	aac667ec58	require editor to fetch config	2025-04-07 09:27:14 -05:00
Andres Martinez Gotor	4cc984f2c4	Sanitize paths before evaluating access to route	2025-04-07 09:27:14 -05:00