diff --git a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md index a37ea409b01..fce5fb08f7b 100644 --- a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md +++ b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md @@ -95,5 +95,5 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. diff --git a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md index 88815855ffd..c50e15a957f 100644 --- a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md +++ b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md @@ -127,7 +127,7 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. ## IAM Policies diff --git a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md index f40e2fd6693..a5fc1996763 100644 --- a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md +++ b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md @@ -137,5 +137,5 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. diff --git a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/nutanix/provision-kubernetes-clusters-in-aos.md b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/nutanix/provision-kubernetes-clusters-in-aos.md index 4e07ed2785a..0fd94570aec 100644 --- a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/nutanix/provision-kubernetes-clusters-in-aos.md +++ b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/nutanix/provision-kubernetes-clusters-in-aos.md @@ -4,7 +4,7 @@ title: Provisioning Kubernetes Clusters in Nutanix AOS To use Rancher to install an [RKE](https://rancher.com/docs/rke/latest/en/) Kubernetes cluster in Nutanix AOS (AHV): -1. Locate Rancher's built-in Nutanix [node driver and activate it](../../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activating-deactivating-node-drivers). +1. Locate Rancher's built-in Nutanix [node driver and activate it](../../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activatingdeactivating-node-drivers). 1. Create a node template, which Rancher will use to provision nodes in Nutanix AOS. @@ -87,6 +87,6 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. \ No newline at end of file diff --git a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md index d5d54c157ca..e1bc41c6f94 100644 --- a/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md +++ b/docs/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md @@ -107,6 +107,6 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. - **Provision Storage:** For an example of how to provision storage in vSphere using Rancher, refer to [this section.](../../../../../pages-for-subheaders/provisioning-storage-examples.md) In order to dynamically provision storage in vSphere, the vSphere provider must be enabled. For details, refer to [in-tree vSphere cloud provider docs](../../../../../how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-cloud-providers/configure-in-tree-vsphere.md) and [out-of-tree vSphere cloud provider docs](../../../../../how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-cloud-providers/configure-out-of-tree-vsphere.md). \ No newline at end of file diff --git a/docs/pages-for-subheaders/use-existing-nodes.md b/docs/pages-for-subheaders/use-existing-nodes.md index dc38e3b0ecf..d0c301bdc32 100644 --- a/docs/pages-for-subheaders/use-existing-nodes.md +++ b/docs/pages-for-subheaders/use-existing-nodes.md @@ -133,5 +133,5 @@ Key=kubernetes.io/cluster/CLUSTERID, Value=shared After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../how-to-guides/new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../how-to-guides/new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../how-to-guides/new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. diff --git a/docs/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md b/docs/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md index f1394eff00f..fb11e6f46c7 100644 --- a/docs/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md +++ b/docs/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md @@ -125,7 +125,7 @@ After cloud credentials are created, the user can start [managing the cloud cred ### Node Drivers -If you don't find the node driver that you want to use, you can see if it is available in Rancher's built-in [node drivers and activate it](../how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activating-deactivating-node-drivers), or you can [add your own custom node driver](../how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#adding-custom-node-drivers). +If you don't find the node driver that you want to use, you can see if it is available in Rancher's built-in [node drivers and activate it](../how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activatingdeactivating-node-drivers), or you can [add your own custom node driver](../how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#adding-custom-node-drivers). ## RKE2 Clusters @@ -133,7 +133,7 @@ Rancher v2.6 introduces provisioning for [RKE2](https://docs.rke2.io/) clusters :::note -For RKE2 cluster templates, please refer to [this page](../how-to-guides/new-user-guides/manage-clusters/manage-cluster-templates.md#rke2-cluster-template) for additional information. +For RKE2 cluster templates, please refer to [this page](../how-to-guides/new-user-guides/manage-clusters/manage-cluster-templates.md#rke2-cluster-template) for additional information. ::: diff --git a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md index 6d81a237ca0..2f7781bf533 100644 --- a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md +++ b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md @@ -84,5 +84,5 @@ You can access your cluster after its state is updated to **Active.** After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. \ No newline at end of file diff --git a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md index 7d65a499d10..2425b1a3915 100644 --- a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md +++ b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md @@ -104,7 +104,7 @@ You can access your cluster after its state is updated to **Active.** After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. ## IAM Policies diff --git a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md index 85b4e1bcdea..ccd0acb6fab 100644 --- a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md +++ b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md @@ -121,5 +121,5 @@ You can access your cluster after its state is updated to **Active.** After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. \ No newline at end of file diff --git a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md index 9f10d3c5d0b..e346f7a44b9 100644 --- a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md +++ b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md @@ -142,6 +142,6 @@ You can access your cluster after its state is updated to **Active.** After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. - **Provision Storage:** For an example of how to provision storage in vSphere using Rancher, refer to [this section.](../../../../../advanced-user-guides/manage-clusters/create-kubernetes-persistent-storage/provisioning-storage-examples/vsphere-storage.md) In order to dynamically provision storage in vSphere, the vSphere provider must be [enabled.](../../set-up-cloud-providers/other-cloud-providers/vsphere.md) \ No newline at end of file diff --git a/versioned_docs/version-2.0-2.4/pages-for-subheaders/use-existing-nodes.md b/versioned_docs/version-2.0-2.4/pages-for-subheaders/use-existing-nodes.md index 6baa97d58a5..0564cd40323 100644 --- a/versioned_docs/version-2.0-2.4/pages-for-subheaders/use-existing-nodes.md +++ b/versioned_docs/version-2.0-2.4/pages-for-subheaders/use-existing-nodes.md @@ -110,5 +110,5 @@ Key=kubernetes.io/cluster/CLUSTERID, Value=shared After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../how-to-guides/advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../how-to-guides/advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../how-to-guides/advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. \ No newline at end of file diff --git a/versioned_docs/version-2.0-2.4/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md b/versioned_docs/version-2.0-2.4/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md index a28666e109a..9c884413269 100644 --- a/versioned_docs/version-2.0-2.4/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md +++ b/versioned_docs/version-2.0-2.4/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md @@ -126,4 +126,4 @@ After cloud credentials are created, the user can start [managing the cloud cred ## Node Drivers -If you don't find the node driver that you want to use, you can see if it is available in Rancher's built-in [node drivers and activate it](../how-to-guides/advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activating-deactivating-node-drivers), or you can [add your own custom node driver](../how-to-guides/advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#adding-custom-node-drivers). +If you don't find the node driver that you want to use, you can see if it is available in Rancher's built-in [node drivers and activate it](../how-to-guides/advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activatingdeactivating-node-drivers), or you can [add your own custom node driver](../how-to-guides/advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#adding-custom-node-drivers). diff --git a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md index c661530ab04..cc883017f1d 100644 --- a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md +++ b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md @@ -58,5 +58,5 @@ You can access your cluster after its state is updated to **Active.** After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. \ No newline at end of file diff --git a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md index f412993de56..ff6e8b4d790 100644 --- a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md +++ b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md @@ -75,7 +75,7 @@ You can access your cluster after its state is updated to **Active.** After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. ## IAM Policies diff --git a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md index 9994dbbbf72..99e5b4735b9 100644 --- a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md +++ b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md @@ -94,5 +94,5 @@ You can access your cluster after its state is updated to **Active.** After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. \ No newline at end of file diff --git a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md index 76c18b86a26..0516c05d3ed 100644 --- a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md +++ b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md @@ -103,6 +103,6 @@ You can access your cluster after its state is updated to **Active.** After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../../advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. - **Provision Storage:** For an example of how to provision storage in vSphere using Rancher, refer to [this section.](../../../../../advanced-user-guides/manage-clusters/create-kubernetes-persistent-storage/provisioning-storage-examples/vsphere-storage.md) In order to dynamically provision storage in vSphere, the vSphere provider must be [enabled.](../../../../../../pages-for-subheaders/vsphere-cloud-provider.md) diff --git a/versioned_docs/version-2.5/pages-for-subheaders/use-existing-nodes.md b/versioned_docs/version-2.5/pages-for-subheaders/use-existing-nodes.md index d7c57476e94..cd891838b35 100644 --- a/versioned_docs/version-2.5/pages-for-subheaders/use-existing-nodes.md +++ b/versioned_docs/version-2.5/pages-for-subheaders/use-existing-nodes.md @@ -112,5 +112,5 @@ Key=kubernetes.io/cluster/CLUSTERID, Value=shared After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../how-to-guides/advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../how-to-guides/advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../how-to-guides/advanced-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. diff --git a/versioned_docs/version-2.5/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md b/versioned_docs/version-2.5/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md index d9ef8dd7242..8282dbd7961 100644 --- a/versioned_docs/version-2.5/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md +++ b/versioned_docs/version-2.5/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md @@ -115,4 +115,4 @@ After cloud credentials are created, the user can start [managing the cloud cred ## Node Drivers -If you don't find the node driver that you want to use, you can see if it is available in Rancher's built-in [node drivers and activate it](../how-to-guides/advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activating-deactivating-node-drivers), or you can [add your own custom node driver](../how-to-guides/advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#adding-custom-node-drivers). +If you don't find the node driver that you want to use, you can see if it is available in Rancher's built-in [node drivers and activate it](../how-to-guides/advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activatingdeactivating-node-drivers), or you can [add your own custom node driver](../how-to-guides/advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#adding-custom-node-drivers). diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md index a37ea409b01..fce5fb08f7b 100644 --- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md +++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-a-digitalocean-cluster.md @@ -95,5 +95,5 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md index 88815855ffd..c50e15a957f 100644 --- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md +++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-amazon-ec2-cluster.md @@ -127,7 +127,7 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. ## IAM Policies diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md index f40e2fd6693..a5fc1996763 100644 --- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md +++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/create-an-azure-cluster.md @@ -137,5 +137,5 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/nutanix/provision-kubernetes-clusters-in-aos.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/nutanix/provision-kubernetes-clusters-in-aos.md index 4e07ed2785a..0fd94570aec 100644 --- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/nutanix/provision-kubernetes-clusters-in-aos.md +++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/nutanix/provision-kubernetes-clusters-in-aos.md @@ -4,7 +4,7 @@ title: Provisioning Kubernetes Clusters in Nutanix AOS To use Rancher to install an [RKE](https://rancher.com/docs/rke/latest/en/) Kubernetes cluster in Nutanix AOS (AHV): -1. Locate Rancher's built-in Nutanix [node driver and activate it](../../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activating-deactivating-node-drivers). +1. Locate Rancher's built-in Nutanix [node driver and activate it](../../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activatingdeactivating-node-drivers). 1. Create a node template, which Rancher will use to provision nodes in Nutanix AOS. @@ -87,6 +87,6 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. \ No newline at end of file diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md index d5d54c157ca..e1bc41c6f94 100644 --- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md +++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/launch-kubernetes-with-rancher/use-new-nodes-in-an-infra-provider/vsphere/provision-kubernetes-clusters-in-vsphere.md @@ -107,6 +107,6 @@ You can access your cluster after its state is updated to **Active**. After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../../../../new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. - **Provision Storage:** For an example of how to provision storage in vSphere using Rancher, refer to [this section.](../../../../../pages-for-subheaders/provisioning-storage-examples.md) In order to dynamically provision storage in vSphere, the vSphere provider must be enabled. For details, refer to [in-tree vSphere cloud provider docs](../../../../../how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-cloud-providers/configure-in-tree-vsphere.md) and [out-of-tree vSphere cloud provider docs](../../../../../how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-cloud-providers/configure-out-of-tree-vsphere.md). \ No newline at end of file diff --git a/versioned_docs/version-2.6/pages-for-subheaders/use-existing-nodes.md b/versioned_docs/version-2.6/pages-for-subheaders/use-existing-nodes.md index dc38e3b0ecf..d0c301bdc32 100644 --- a/versioned_docs/version-2.6/pages-for-subheaders/use-existing-nodes.md +++ b/versioned_docs/version-2.6/pages-for-subheaders/use-existing-nodes.md @@ -133,5 +133,5 @@ Key=kubernetes.io/cluster/CLUSTERID, Value=shared After creating your cluster, you can access it through the Rancher UI. As a best practice, we recommend setting up these alternate ways of accessing your cluster: -- **Access your cluster with the kubectl CLI:** Follow [these steps](../how-to-guides/new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-on-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. +- **Access your cluster with the kubectl CLI:** Follow [these steps](../how-to-guides/new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#accessing-clusters-with-kubectl-from-your-workstation) to access clusters with kubectl on your workstation. In this case, you will be authenticated through the Rancher server’s authentication proxy, then Rancher will connect you to the downstream cluster. This method lets you manage the cluster without the Rancher UI. - **Access your cluster with the kubectl CLI, using the authorized cluster endpoint:** Follow [these steps](../how-to-guides/new-user-guides/manage-clusters/access-clusters/use-kubectl-and-kubeconfig.md#authenticating-directly-with-a-downstream-cluster) to access your cluster with kubectl directly, without authenticating through Rancher. We recommend setting up this alternative method to access your cluster so that in case you can’t connect to Rancher, you can still access the cluster. diff --git a/versioned_docs/version-2.6/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md b/versioned_docs/version-2.6/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md index f96d4fed8c2..51c0036055a 100644 --- a/versioned_docs/version-2.6/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md +++ b/versioned_docs/version-2.6/pages-for-subheaders/use-new-nodes-in-an-infra-provider.md @@ -125,7 +125,7 @@ After cloud credentials are created, the user can start [managing the cloud cred ### Node Drivers -If you don't find the node driver that you want to use, you can see if it is available in Rancher's built-in [node drivers and activate it](../how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activating-deactivating-node-drivers), or you can [add your own custom node driver](../how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#adding-custom-node-drivers). +If you don't find the node driver that you want to use, you can see if it is available in Rancher's built-in [node drivers and activate it](../how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#activatingdeactivating-node-drivers), or you can [add your own custom node driver](../how-to-guides/new-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-node-drivers.md#adding-custom-node-drivers). ## RKE2 Clusters @@ -133,7 +133,7 @@ Rancher v2.6 introduces provisioning for [RKE2](https://docs.rke2.io/) clusters :::note -For RKE2 cluster templates, please refer to [this page](../how-to-guides/new-user-guides/manage-clusters/manage-cluster-templates.md#rke2-cluster-template) for additional information. +For RKE2 cluster templates, please refer to [this page](../how-to-guides/new-user-guides/manage-clusters/manage-cluster-templates.md#rke2-cluster-template) for additional information. :::