diff --git a/docs/integrations-in-rancher/logging/logging-helm-chart-options.md b/docs/integrations-in-rancher/logging/logging-helm-chart-options.md index c08a4c9c15f..fd6299abc4d 100644 --- a/docs/integrations-in-rancher/logging/logging-helm-chart-options.md +++ b/docs/integrations-in-rancher/logging/logging-helm-chart-options.md @@ -41,7 +41,7 @@ Logging v2 was tested with SELinux on RHEL/CentOS 7 and 8. [Security-Enhanced Linux (SELinux)](https://en.wikipedia.org/wiki/Security-Enhanced_Linux) is a security enhancement to Linux. After being historically used by government agencies, SELinux is now industry standard and is enabled by default on CentOS 7 and 8. -To use Logging v2 with SELinux, we recommend installing the `rancher-selinux` RPM according to the instructions on [this page.](../../pages-for-subheaders/selinux-rpm.md#installing-the-rancher-selinux-rpm) +To use Logging v2 with SELinux, we recommend installing the `rancher-selinux` RPM according to these [instructions](../../pages-for-subheaders/selinux-rpm.md). Then, when installing the logging application, configure the chart to be SELinux aware by changing `global.seLinux.enabled` to `true` in the `values.yaml`. diff --git a/docs/integrations-in-rancher/logging/taints-and-tolerations.md b/docs/integrations-in-rancher/logging/taints-and-tolerations.md index 4d663b5ef3a..c5cf0e35578 100644 --- a/docs/integrations-in-rancher/logging/taints-and-tolerations.md +++ b/docs/integrations-in-rancher/logging/taints-and-tolerations.md @@ -12,7 +12,7 @@ Using `nodeSelector` gives pods an affinity towards certain nodes. Both provide choice for the what node(s) the pod will run on. -- [Default Implementation in Rancher's Logging Stack](#default-implementation-in-rancher-s-logging-stack) +- [Default Implementation in Rancher's Logging Stack](#default-implementation-in-ranchers-logging-stack) - [Adding NodeSelector Settings and Tolerations for Custom Taints](#adding-nodeselector-settings-and-tolerations-for-custom-taints) diff --git a/docs/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md b/docs/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md index 401b35d53d3..d5fd42aa05e 100644 --- a/docs/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md +++ b/docs/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md @@ -27,7 +27,7 @@ When `rancher-monitoring` is installed, the Prometheus Alertmanager UI is deploy :::note -This section assumes familiarity with how monitoring components work together. For more information about Alertmanager, see [this section.](how-monitoring-works.md#how-alertmanager-works) +This section assumes familiarity with how monitoring components work together. For more information about Alertmanager, see [How Alertmanager Works.](how-monitoring-works.md#3-how-alertmanager-works) ::: diff --git a/docs/pages-for-subheaders/backup-restore-and-disaster-recovery.md b/docs/pages-for-subheaders/backup-restore-and-disaster-recovery.md index 7183dc5a836..ccb69108f66 100644 --- a/docs/pages-for-subheaders/backup-restore-and-disaster-recovery.md +++ b/docs/pages-for-subheaders/backup-restore-and-disaster-recovery.md @@ -93,4 +93,4 @@ For information on configuring these options, refer to [this page.](../reference ### Example values.yaml for the rancher-backup Helm Chart -The example [values.yaml file](../reference-guides/backup-restore-configuration/storage-configuration.md#example-values-yaml-for-the-rancher-backup-helm-chart) can be used to configure the `rancher-backup` operator when the Helm CLI is used to install it. +The example [values.yaml file](../reference-guides/backup-restore-configuration/storage-configuration.md#example-valuesyaml-for-the-rancher-backup-helm-chart) can be used to configure the `rancher-backup` operator when the Helm CLI is used to install it. diff --git a/docs/pages-for-subheaders/cli-with-rancher.md b/docs/pages-for-subheaders/cli-with-rancher.md index 07e11cd7abb..d4c33d7f390 100644 --- a/docs/pages-for-subheaders/cli-with-rancher.md +++ b/docs/pages-for-subheaders/cli-with-rancher.md @@ -2,4 +2,4 @@ title: CLI with Rancher --- -Interact with Rancher using command line interface (CLI) tools from your workstation. The following docs will describe the [Rancher CLI](../reference-guides/cli-with-rancher/rancher-cli.md) and [kubectl Utility](../reference-guides/cli-with-rancher/kubectl-utility). \ No newline at end of file +Interact with Rancher using command line interface (CLI) tools from your workstation. The following docs will describe the [Rancher CLI](../reference-guides/cli-with-rancher/rancher-cli.md) and [kubectl Utility](../reference-guides/cli-with-rancher/kubectl-utility.md). \ No newline at end of file diff --git a/i18n/zh/docusaurus-plugin-content-docs/current/integrations-in-rancher/logging/logging-helm-chart-options.md b/i18n/zh/docusaurus-plugin-content-docs/current/integrations-in-rancher/logging/logging-helm-chart-options.md index eac9e29c05e..6e19993b98f 100644 --- a/i18n/zh/docusaurus-plugin-content-docs/current/integrations-in-rancher/logging/logging-helm-chart-options.md +++ b/i18n/zh/docusaurus-plugin-content-docs/current/integrations-in-rancher/logging/logging-helm-chart-options.md @@ -41,7 +41,7 @@ Logging v2 已在 RHEL/CentOS 7 和 8 上使用 SELinux 进行了测试。 [安全增强型 Linux (SELinux)](https://en.wikipedia.org/wiki/Security-Enhanced_Linux) 是对 Linux 的安全增强。被政府机构使用之后，SELinux 已成为行业标准，并在 CentOS 7 和 8 上默认启用。 -要配合使用 Logging V2 与 SELinux，我们建议你根据[此页面](../../pages-for-subheaders/selinux-rpm.md#安装-rancher-selinux-rpm)的安装说明安装 `rancher-selinux` RPM。 +要配合使用 Logging V2 与 SELinux，我们建议你根据[此页面](../../pages-for-subheaders/selinux-rpm.md)的安装说明安装 `rancher-selinux` RPM。 然后，在安装 Logging 应用程序时，在 `values.yaml` 中将 `global.seLinux.enabled` 更改为 `true`，使 Chart 支持 SELinux。 diff --git a/i18n/zh/docusaurus-plugin-content-docs/current/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md b/i18n/zh/docusaurus-plugin-content-docs/current/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md index 6cd817a44b6..449966124ef 100644 --- a/i18n/zh/docusaurus-plugin-content-docs/current/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md +++ b/i18n/zh/docusaurus-plugin-content-docs/current/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md @@ -27,7 +27,7 @@ title: 内置仪表板 :::note -本节参考假设你已经熟悉 Monitoring 组件的协同工作方式。有关 Alertmanager 的详细信息，请参阅[本节](how-monitoring-works.md#alertmanager-工作原理)。 +本节参考假设你已经熟悉 Monitoring 组件的协同工作方式。有关 Alertmanager 的详细信息，请参阅[本节](how-monitoring-works.md#3-alertmanager-的工作原理)。 ::: diff --git a/i18n/zh/docusaurus-plugin-content-docs/version-2.6/integrations-in-rancher/logging/logging-helm-chart-options.md b/i18n/zh/docusaurus-plugin-content-docs/version-2.6/integrations-in-rancher/logging/logging-helm-chart-options.md index eac9e29c05e..6e19993b98f 100644 --- a/i18n/zh/docusaurus-plugin-content-docs/version-2.6/integrations-in-rancher/logging/logging-helm-chart-options.md +++ b/i18n/zh/docusaurus-plugin-content-docs/version-2.6/integrations-in-rancher/logging/logging-helm-chart-options.md @@ -41,7 +41,7 @@ Logging v2 已在 RHEL/CentOS 7 和 8 上使用 SELinux 进行了测试。 [安全增强型 Linux (SELinux)](https://en.wikipedia.org/wiki/Security-Enhanced_Linux) 是对 Linux 的安全增强。被政府机构使用之后，SELinux 已成为行业标准，并在 CentOS 7 和 8 上默认启用。 -要配合使用 Logging V2 与 SELinux，我们建议你根据[此页面](../../pages-for-subheaders/selinux-rpm.md#安装-rancher-selinux-rpm)的安装说明安装 `rancher-selinux` RPM。 +要配合使用 Logging V2 与 SELinux，我们建议你根据[此页面](../../pages-for-subheaders/selinux-rpm.md)的安装说明安装 `rancher-selinux` RPM。 然后，在安装 Logging 应用程序时，在 `values.yaml` 中将 `global.seLinux.enabled` 更改为 `true`，使 Chart 支持 SELinux。 diff --git a/i18n/zh/docusaurus-plugin-content-docs/version-2.6/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md b/i18n/zh/docusaurus-plugin-content-docs/version-2.6/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md index 6cd817a44b6..449966124ef 100644 --- a/i18n/zh/docusaurus-plugin-content-docs/version-2.6/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md +++ b/i18n/zh/docusaurus-plugin-content-docs/version-2.6/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md @@ -27,7 +27,7 @@ title: 内置仪表板 :::note -本节参考假设你已经熟悉 Monitoring 组件的协同工作方式。有关 Alertmanager 的详细信息，请参阅[本节](how-monitoring-works.md#alertmanager-工作原理)。 +本节参考假设你已经熟悉 Monitoring 组件的协同工作方式。有关 Alertmanager 的详细信息，请参阅[本节](how-monitoring-works.md#3-alertmanager-的工作原理)。 ::: diff --git a/versioned_docs/version-2.0-2.4/pages-for-subheaders/cli-with-rancher.md b/versioned_docs/version-2.0-2.4/pages-for-subheaders/cli-with-rancher.md index 07e11cd7abb..d4c33d7f390 100644 --- a/versioned_docs/version-2.0-2.4/pages-for-subheaders/cli-with-rancher.md +++ b/versioned_docs/version-2.0-2.4/pages-for-subheaders/cli-with-rancher.md @@ -2,4 +2,4 @@ title: CLI with Rancher --- -Interact with Rancher using command line interface (CLI) tools from your workstation. The following docs will describe the [Rancher CLI](../reference-guides/cli-with-rancher/rancher-cli.md) and [kubectl Utility](../reference-guides/cli-with-rancher/kubectl-utility). \ No newline at end of file +Interact with Rancher using command line interface (CLI) tools from your workstation. The following docs will describe the [Rancher CLI](../reference-guides/cli-with-rancher/rancher-cli.md) and [kubectl Utility](../reference-guides/cli-with-rancher/kubectl-utility.md). \ No newline at end of file diff --git a/versioned_docs/version-2.5/explanations/integrations-in-rancher/logging/logging-helm-chart-options.md b/versioned_docs/version-2.5/explanations/integrations-in-rancher/logging/logging-helm-chart-options.md index 23885aa59bf..4a1f496a82b 100644 --- a/versioned_docs/version-2.5/explanations/integrations-in-rancher/logging/logging-helm-chart-options.md +++ b/versioned_docs/version-2.5/explanations/integrations-in-rancher/logging/logging-helm-chart-options.md @@ -39,7 +39,7 @@ _Available as of v2.5.8_ [Security-Enhanced Linux (SELinux)](https://en.wikipedia.org/wiki/Security-Enhanced_Linux) is a security enhancement to Linux. After being historically used by government agencies, SELinux is now industry standard and is enabled by default on CentOS 7 and 8. -To use Logging v2 with SELinux, we recommend installing the `rancher-selinux` RPM according to the instructions on [this page.](../../../pages-for-subheaders/selinux-rpm.md#installing-the-rancher-selinux-rpm) +To use Logging v2 with SELinux, we recommend installing the `rancher-selinux` RPM according to these [instructions.](../../../pages-for-subheaders/selinux-rpm.md) Then, when installing the logging application, configure the chart to be SELinux aware by changing `global.seLinux.enabled` to `true` in the `values.yaml`. diff --git a/versioned_docs/version-2.5/explanations/integrations-in-rancher/logging/taints-and-tolerations.md b/versioned_docs/version-2.5/explanations/integrations-in-rancher/logging/taints-and-tolerations.md index c6216aef3c1..c15ebd53d11 100644 --- a/versioned_docs/version-2.5/explanations/integrations-in-rancher/logging/taints-and-tolerations.md +++ b/versioned_docs/version-2.5/explanations/integrations-in-rancher/logging/taints-and-tolerations.md @@ -12,7 +12,7 @@ Using `nodeSelector` gives pods an affinity towards certain nodes. Both provide choice for the what node(s) the pod will run on. -- [Default Implementation in Rancher's Logging Stack](#default-implementation-in-rancher-s-logging-stack) +- [Default Implementation in Rancher's Logging Stack](#default-implementation-in-ranchers-logging-stack) - [Adding NodeSelector Settings and Tolerations for Custom Taints](#adding-nodeselector-settings-and-tolerations-for-custom-taints) diff --git a/versioned_docs/version-2.5/explanations/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md b/versioned_docs/version-2.5/explanations/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md index 850c72f7105..70393d7b08a 100644 --- a/versioned_docs/version-2.5/explanations/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md +++ b/versioned_docs/version-2.5/explanations/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md @@ -25,7 +25,7 @@ For information about role-based access control for Grafana, see [this section.] When `rancher-monitoring` is installed, the Prometheus Alertmanager UI is deployed, allowing you to view your alerts and the current Alertmanager configuration. -> This section assumes familiarity with how monitoring components work together. For more information about Alertmanager, see [this section.](how-monitoring-works.md#how-alertmanager-works) +> This section assumes familiarity with how monitoring components work together. For more information about Alertmanager, see [How Alertmanager Works.](how-monitoring-works.md#3-how-alertmanager-works) ### Accessing the Alertmanager UI diff --git a/versioned_docs/version-2.5/pages-for-subheaders/backup-restore-and-disaster-recovery.md b/versioned_docs/version-2.5/pages-for-subheaders/backup-restore-and-disaster-recovery.md index 1ebca29671c..01a2b36f67e 100644 --- a/versioned_docs/version-2.5/pages-for-subheaders/backup-restore-and-disaster-recovery.md +++ b/versioned_docs/version-2.5/pages-for-subheaders/backup-restore-and-disaster-recovery.md @@ -103,4 +103,4 @@ For information on configuring these options, refer to [this page.](../reference ### Example values.yaml for the rancher-backup Helm Chart -The example [values.yaml file](../reference-guides/backup-restore-configuration/storage-configuration.md#example-values-yaml-for-the-rancher-backup-helm-chart) can be used to configure the `rancher-backup` operator when the Helm CLI is used to install it. +The example [values.yaml file](../reference-guides/backup-restore-configuration/storage-configuration.md#example-valuesyaml-for-the-rancher-backup-helm-chart) can be used to configure the `rancher-backup` operator when the Helm CLI is used to install it. diff --git a/versioned_docs/version-2.5/pages-for-subheaders/cli-with-rancher.md b/versioned_docs/version-2.5/pages-for-subheaders/cli-with-rancher.md index 07e11cd7abb..d4c33d7f390 100644 --- a/versioned_docs/version-2.5/pages-for-subheaders/cli-with-rancher.md +++ b/versioned_docs/version-2.5/pages-for-subheaders/cli-with-rancher.md @@ -2,4 +2,4 @@ title: CLI with Rancher --- -Interact with Rancher using command line interface (CLI) tools from your workstation. The following docs will describe the [Rancher CLI](../reference-guides/cli-with-rancher/rancher-cli.md) and [kubectl Utility](../reference-guides/cli-with-rancher/kubectl-utility). \ No newline at end of file +Interact with Rancher using command line interface (CLI) tools from your workstation. The following docs will describe the [Rancher CLI](../reference-guides/cli-with-rancher/rancher-cli.md) and [kubectl Utility](../reference-guides/cli-with-rancher/kubectl-utility.md). \ No newline at end of file diff --git a/versioned_docs/version-2.6/integrations-in-rancher/logging/logging-helm-chart-options.md b/versioned_docs/version-2.6/integrations-in-rancher/logging/logging-helm-chart-options.md index c08a4c9c15f..8bc12fcbd06 100644 --- a/versioned_docs/version-2.6/integrations-in-rancher/logging/logging-helm-chart-options.md +++ b/versioned_docs/version-2.6/integrations-in-rancher/logging/logging-helm-chart-options.md @@ -41,7 +41,7 @@ Logging v2 was tested with SELinux on RHEL/CentOS 7 and 8. [Security-Enhanced Linux (SELinux)](https://en.wikipedia.org/wiki/Security-Enhanced_Linux) is a security enhancement to Linux. After being historically used by government agencies, SELinux is now industry standard and is enabled by default on CentOS 7 and 8. -To use Logging v2 with SELinux, we recommend installing the `rancher-selinux` RPM according to the instructions on [this page.](../../pages-for-subheaders/selinux-rpm.md#installing-the-rancher-selinux-rpm) +To use Logging v2 with SELinux, we recommend installing the `rancher-selinux` RPM according to these [instructions.](../../pages-for-subheaders/selinux-rpm.md) Then, when installing the logging application, configure the chart to be SELinux aware by changing `global.seLinux.enabled` to `true` in the `values.yaml`. diff --git a/versioned_docs/version-2.6/integrations-in-rancher/logging/taints-and-tolerations.md b/versioned_docs/version-2.6/integrations-in-rancher/logging/taints-and-tolerations.md index 4d663b5ef3a..c5cf0e35578 100644 --- a/versioned_docs/version-2.6/integrations-in-rancher/logging/taints-and-tolerations.md +++ b/versioned_docs/version-2.6/integrations-in-rancher/logging/taints-and-tolerations.md @@ -12,7 +12,7 @@ Using `nodeSelector` gives pods an affinity towards certain nodes. Both provide choice for the what node(s) the pod will run on. -- [Default Implementation in Rancher's Logging Stack](#default-implementation-in-rancher-s-logging-stack) +- [Default Implementation in Rancher's Logging Stack](#default-implementation-in-ranchers-logging-stack) - [Adding NodeSelector Settings and Tolerations for Custom Taints](#adding-nodeselector-settings-and-tolerations-for-custom-taints) diff --git a/versioned_docs/version-2.6/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md b/versioned_docs/version-2.6/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md index 401b35d53d3..5acbd726024 100644 --- a/versioned_docs/version-2.6/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md +++ b/versioned_docs/version-2.6/integrations-in-rancher/monitoring-and-alerting/built-in-dashboards.md @@ -27,7 +27,7 @@ When `rancher-monitoring` is installed, the Prometheus Alertmanager UI is deploy :::note -This section assumes familiarity with how monitoring components work together. For more information about Alertmanager, see [this section.](how-monitoring-works.md#how-alertmanager-works) +This section assumes familiarity with how monitoring components work together. For more information about Alertmanager, see [How Alertmanager Works.](how-monitoring-works.md#3-how-alertmanager-works) ::: diff --git a/versioned_docs/version-2.6/pages-for-subheaders/backup-restore-and-disaster-recovery.md b/versioned_docs/version-2.6/pages-for-subheaders/backup-restore-and-disaster-recovery.md index 3409ed545be..734d97722ca 100644 --- a/versioned_docs/version-2.6/pages-for-subheaders/backup-restore-and-disaster-recovery.md +++ b/versioned_docs/version-2.6/pages-for-subheaders/backup-restore-and-disaster-recovery.md @@ -110,4 +110,4 @@ For information on configuring these options, refer to [this page.](../reference ### Example values.yaml for the rancher-backup Helm Chart -The example [values.yaml file](../reference-guides/backup-restore-configuration/storage-configuration.md#example-values-yaml-for-the-rancher-backup-helm-chart) can be used to configure the `rancher-backup` operator when the Helm CLI is used to install it. +The example [values.yaml file](../reference-guides/backup-restore-configuration/storage-configuration.md#example-valuesyaml-for-the-rancher-backup-helm-chart) can be used to configure the `rancher-backup` operator when the Helm CLI is used to install it. diff --git a/versioned_docs/version-2.6/pages-for-subheaders/cli-with-rancher.md b/versioned_docs/version-2.6/pages-for-subheaders/cli-with-rancher.md index 07e11cd7abb..d4c33d7f390 100644 --- a/versioned_docs/version-2.6/pages-for-subheaders/cli-with-rancher.md +++ b/versioned_docs/version-2.6/pages-for-subheaders/cli-with-rancher.md @@ -2,4 +2,4 @@ title: CLI with Rancher --- -Interact with Rancher using command line interface (CLI) tools from your workstation. The following docs will describe the [Rancher CLI](../reference-guides/cli-with-rancher/rancher-cli.md) and [kubectl Utility](../reference-guides/cli-with-rancher/kubectl-utility). \ No newline at end of file +Interact with Rancher using command line interface (CLI) tools from your workstation. The following docs will describe the [Rancher CLI](../reference-guides/cli-with-rancher/rancher-cli.md) and [kubectl Utility](../reference-guides/cli-with-rancher/kubectl-utility.md). \ No newline at end of file