diff --git a/docs/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md b/docs/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
index 49887d29f02..00187b3b23a 100644
--- a/docs/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
+++ b/docs/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
@@ -120,7 +120,7 @@ Kubernetes v1.22, available as an experimental feature of v2.6.3, does not suppo
If this applies, provide the name of the `Secret` object containing the encryption config file. If you only have the encryption config file, but don't have the secret created in this cluster, use the following steps to create the secret:
- 1. Create an [encryption configuration file](reference-guides/backup-restore-configuration/backup-configuration.md#encryption)
+ 1. Create an [encryption configuration file](../../../reference-guides/backup-restore-configuration/backup-configuration.md#encryption)
1. The command below uses a file named `encryption-provider-config.yaml`, with the `--from-file` flag. Run the below once the `EncryptionConfiguration` is saved in a file called `encryption-provider-config.yaml`:
```bash
diff --git a/docs/how-to-guides/new-user-guides/deploy-apps-across-clusters/fleet.md b/docs/how-to-guides/new-user-guides/deploy-apps-across-clusters/fleet.md
index 19b779d3f9e..426f7b2ea24 100644
--- a/docs/how-to-guides/new-user-guides/deploy-apps-across-clusters/fleet.md
+++ b/docs/how-to-guides/new-user-guides/deploy-apps-across-clusters/fleet.md
@@ -55,7 +55,7 @@ The Helm chart in the git repository must include its dependencies in the charts
## Troubleshooting
---
-* **Known Issue:** clientSecretName and helmSecretName secrets for Fleet gitrepos are not included in the backup nor restore created by the [backup-restore-operator](../backup-restore-and-disaster-recovery/back-up-rancher.md#1-install-the-rancher-backups-operator). We will update the community once a permanent solution is in place.
+* **Known Issue:** clientSecretName and helmSecretName secrets for Fleet gitrepos are not included in the backup nor restore created by the [backup-restore-operator](../backup-restore-and-disaster-recovery/back-up-rancher.md#1-install-the-rancher-backup-operator). We will update the community once a permanent solution is in place.
* **Temporary Workaround:**
By default, user-defined secrets are not backed up in Fleet. It is necessary to recreate secrets if performing a disaster recovery restore or migration of Rancher into a fresh cluster. To modify resourceSet to include extra resources you want to backup, refer to docs [here](https://github.com/rancher/backup-restore-operator#user-flow).
diff --git a/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md b/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
index 523eeccedbe..b6cc580d0f4 100644
--- a/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
+++ b/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
@@ -2,7 +2,7 @@
title: Creating an Aliyun ACK Cluster
---
-You can use Rancher to create a cluster hosted in Alibaba Cloud Kubernetes (ACK). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for ACK, but by default, this cluster driver is `inactive`. In order to launch ACK clusters, you will need to [enable the ACK cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning ACK clusters.
+You can use Rancher to create a cluster hosted in Alibaba Cloud Kubernetes (ACK). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for ACK, but by default, this cluster driver is `inactive`. In order to launch ACK clusters, you will need to [enable the ACK cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning ACK clusters.
## Prerequisites Outside of Rancher
diff --git a/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md b/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
index 84dbac4841f..1133d5600b4 100644
--- a/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
+++ b/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
@@ -2,7 +2,7 @@
title: Creating a Huawei CCE Cluster
---
-You can use Rancher to create a cluster hosted in Huawei Cloud Container Engine (CCE). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for CCE, but by default, this cluster driver is `inactive`. In order to launch CCE clusters, you will need to [enable the CCE cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning CCE clusters.
+You can use Rancher to create a cluster hosted in Huawei Cloud Container Engine (CCE). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for CCE, but by default, this cluster driver is `inactive`. In order to launch CCE clusters, you will need to [enable the CCE cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning CCE clusters.
## Prerequisites in Huawei
@@ -12,7 +12,7 @@ Deploying to CCE will incur charges.
:::
-1. Find your project ID in Huawei CCE portal. See the CCE documentation on how to [manage your projects](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0066738518.html).
+1. Find your project ID in Huawei CCE portal. See the CCE documentation on how to [manage your projects](https://doc.hcs.huawei.com/api/cce/cce_02_0341.html#cce_02_0341__section17571944123214).
2. Create an [Access Key ID and Secret Access Key](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0079477318.html).
diff --git a/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md b/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
index 6b14ed1eda4..ed0e11003ae 100644
--- a/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
+++ b/docs/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
@@ -2,7 +2,7 @@
title: Creating a Tencent TKE Cluster
---
-You can use Rancher to create a cluster hosted in Tencent Kubernetes Engine (TKE). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for TKE, but by default, this cluster driver is `inactive`. In order to launch TKE clusters, you will need to [enable the TKE cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning TKE clusters.
+You can use Rancher to create a cluster hosted in Tencent Kubernetes Engine (TKE). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for TKE, but by default, this cluster driver is `inactive`. In order to launch TKE clusters, you will need to [enable the TKE cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning TKE clusters.
## Prerequisites in Tencent
diff --git a/i18n/zh/docusaurus-plugin-content-docs/current/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md b/i18n/zh/docusaurus-plugin-content-docs/current/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
index f0280c1dc2d..19ef7fe20b2 100644
--- a/i18n/zh/docusaurus-plugin-content-docs/current/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
+++ b/i18n/zh/docusaurus-plugin-content-docs/current/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
@@ -120,7 +120,7 @@ Kubernetes v1.22 是 Rancher 2.6.3 的实验功能，不支持使用 apiVersion
如果适用，请提供包含加密配置文件的 `Secret` 对象的名称。如果你只有加密配置文件，但没有在此集群中创建 Secret，请按照以下步骤创建 Secret。
- 1. 创建[加密配置文件](reference-guides/backup-restore-configuration/backup-configuration.md#encryption)
+ 1. 创建[加密配置文件](../../../reference-guides/backup-restore-configuration/backup-configuration.md#加密)
1. 下面的命令使用一个名为 `encryption-provider-config.yaml` 的文件，使用了 `--from-file` 标志。将 `EncryptionConfiguration` 保存到名为 `encryption-provider-config.yaml` 的文件中之后，运行以下命令：
```bash
diff --git a/i18n/zh/docusaurus-plugin-content-docs/current/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md b/i18n/zh/docusaurus-plugin-content-docs/current/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
index 7efdec90c6f..63c1bcc7ded 100644
--- a/i18n/zh/docusaurus-plugin-content-docs/current/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
+++ b/i18n/zh/docusaurus-plugin-content-docs/current/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
@@ -12,7 +12,7 @@ title: 创建华为 CCE 集群
:::
-1. 在华为 CCE 门户中找到你的项目 ID。请参阅 CCE 文档以了解如何[管理你的项目](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0066738518.html)。
+1. 在华为 CCE 门户中找到你的项目 ID。请参阅 CCE 文档以了解如何[管理你的项目](https://doc.hcs.huawei.com/api/cce/cce_02_0341.html#cce_02_0341__section17571944123214)。
2. 创建一个[访问密钥 ID 和密文访问密钥](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0079477318.html)。
diff --git a/i18n/zh/docusaurus-plugin-content-docs/version-2.6/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md b/i18n/zh/docusaurus-plugin-content-docs/version-2.6/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
index b5048eb40d3..184906417e4 100644
--- a/i18n/zh/docusaurus-plugin-content-docs/version-2.6/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
+++ b/i18n/zh/docusaurus-plugin-content-docs/version-2.6/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
@@ -120,7 +120,7 @@ Kubernetes v1.22 是 Rancher 2.6.3 的实验功能，不支持使用 apiVersion
如果适用，请提供包含加密配置文件的 `Secret` 对象的名称。如果你只有加密配置文件，但没有在此集群中创建 Secret，请按照以下步骤创建 Secret。
- 1. 创建[加密配置文件](reference-guides/backup-restore-configuration/backup-configuration.md#encryption)
+ 1. 创建[加密配置文件](../../../reference-guides/backup-restore-configuration/backup-configuration.md#加密)
1. 下面的命令使用一个名为 `encryption-provider-config.yaml` 的文件，使用了 `--from-file` 标志。将 `EncryptionConfiguration` 保存到名为 `encryption-provider-config.yaml` 的文件中之后，运行以下命令：
```bash
diff --git a/i18n/zh/docusaurus-plugin-content-docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md b/i18n/zh/docusaurus-plugin-content-docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
index 7efdec90c6f..63c1bcc7ded 100644
--- a/i18n/zh/docusaurus-plugin-content-docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
+++ b/i18n/zh/docusaurus-plugin-content-docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
@@ -12,7 +12,7 @@ title: 创建华为 CCE 集群
:::
-1. 在华为 CCE 门户中找到你的项目 ID。请参阅 CCE 文档以了解如何[管理你的项目](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0066738518.html)。
+1. 在华为 CCE 门户中找到你的项目 ID。请参阅 CCE 文档以了解如何[管理你的项目](https://doc.hcs.huawei.com/api/cce/cce_02_0341.html#cce_02_0341__section17571944123214)。
2. 创建一个[访问密钥 ID 和密文访问密钥](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0079477318.html)。
diff --git a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
index bde64eeed63..3af9de61c95 100644
--- a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
+++ b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
@@ -4,7 +4,7 @@ title: Creating an Aliyun ACK Cluster
_Available as of v2.2.0_
-You can use Rancher to create a cluster hosted in Alibaba Cloud Kubernetes (ACK). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for ACK, but by default, this cluster driver is `inactive`. In order to launch ACK clusters, you will need to [enable the ACK cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning ACK clusters.
+You can use Rancher to create a cluster hosted in Alibaba Cloud Kubernetes (ACK). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for ACK, but by default, this cluster driver is `inactive`. In order to launch ACK clusters, you will need to [enable the ACK cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning ACK clusters.
## Prerequisites
diff --git a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
index 8fb4fd68086..13d5fa0d93f 100644
--- a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
+++ b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
@@ -4,14 +4,14 @@ title: Creating a Huawei CCE Cluster
_Available as of v2.2.0_
-You can use Rancher to create a cluster hosted in Huawei Cloud Container Engine (CCE). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for CCE, but by default, this cluster driver is `inactive`. In order to launch CCE clusters, you will need to [enable the CCE cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning CCE clusters.
+You can use Rancher to create a cluster hosted in Huawei Cloud Container Engine (CCE). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for CCE, but by default, this cluster driver is `inactive`. In order to launch CCE clusters, you will need to [enable the CCE cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning CCE clusters.
## Prerequisites in Huawei
>**Note**
>Deploying to CCE will incur charges.
-1. Find your project ID in Huawei CCE portal. See the CCE documentation on how to [manage your projects](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0066738518.html).
+1. Find your project ID in Huawei CCE portal. See the CCE documentation on how to [manage your projects](https://doc.hcs.huawei.com/api/cce/cce_02_0341.html#cce_02_0341__section17571944123214).
2. Create an [Access Key ID and Secret Access Key](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0079477318.html).
diff --git a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
index e7a1fc5fd9a..cf228c7e602 100644
--- a/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
+++ b/versioned_docs/version-2.0-2.4/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
@@ -4,7 +4,7 @@ title: Creating a Tencent TKE Cluster
_Available as of v2.2.0_
-You can use Rancher to create a cluster hosted in Tencent Kubernetes Engine (TKE). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for TKE, but by default, this cluster driver is `inactive`. In order to launch TKE clusters, you will need to [enable the TKE cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning TKE clusters.
+You can use Rancher to create a cluster hosted in Tencent Kubernetes Engine (TKE). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for TKE, but by default, this cluster driver is `inactive`. In order to launch TKE clusters, you will need to [enable the TKE cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning TKE clusters.
## Prerequisites in Tencent
diff --git a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
index 632f9823677..1615a5175bb 100644
--- a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
+++ b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
@@ -2,7 +2,7 @@
title: Creating an Aliyun ACK Cluster
---
-You can use Rancher to create a cluster hosted in Alibaba Cloud Kubernetes (ACK). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for ACK, but by default, this cluster driver is `inactive`. In order to launch ACK clusters, you will need to [enable the ACK cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning ACK clusters.
+You can use Rancher to create a cluster hosted in Alibaba Cloud Kubernetes (ACK). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for ACK, but by default, this cluster driver is `inactive`. In order to launch ACK clusters, you will need to [enable the ACK cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning ACK clusters.
## Prerequisites
diff --git a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
index c1933daf210..2367c40ed7a 100644
--- a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
+++ b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
@@ -2,14 +2,14 @@
title: Creating a Huawei CCE Cluster
---
-You can use Rancher to create a cluster hosted in Huawei Cloud Container Engine (CCE). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for CCE, but by default, this cluster driver is `inactive`. In order to launch CCE clusters, you will need to [enable the CCE cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning CCE clusters.
+You can use Rancher to create a cluster hosted in Huawei Cloud Container Engine (CCE). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for CCE, but by default, this cluster driver is `inactive`. In order to launch CCE clusters, you will need to [enable the CCE cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning CCE clusters.
## Prerequisites in Huawei
>**Note**
>Deploying to CCE will incur charges.
-1. Find your project ID in Huawei CCE portal. See the CCE documentation on how to [manage your projects](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0066738518.html).
+1. Find your project ID in Huawei CCE portal. See the CCE documentation on how to [manage your projects](https://doc.hcs.huawei.com/api/cce/cce_02_0341.html#cce_02_0341__section17571944123214).
2. Create an [Access Key ID and Secret Access Key](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0079477318.html).
diff --git a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
index 3065569de89..e2283d00d10 100644
--- a/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
+++ b/versioned_docs/version-2.5/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
@@ -2,7 +2,7 @@
title: Creating a Tencent TKE Cluster
---
-You can use Rancher to create a cluster hosted in Tencent Kubernetes Engine (TKE). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for TKE, but by default, this cluster driver is `inactive`. In order to launch TKE clusters, you will need to [enable the TKE cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning TKE clusters.
+You can use Rancher to create a cluster hosted in Tencent Kubernetes Engine (TKE). Rancher has already implemented and packaged the [cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for TKE, but by default, this cluster driver is `inactive`. In order to launch TKE clusters, you will need to [enable the TKE cluster driver](../../../advanced-user-guides/authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning TKE clusters.
## Prerequisites in Tencent
diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
index eff64956087..159020eba48 100644
--- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
+++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/backup-restore-and-disaster-recovery/migrate-rancher-to-new-cluster.md
@@ -48,7 +48,7 @@ Install the [rancher-backup chart](https://github.com/rancher/backup-restore-ope
The above assumes an environment with outbound connectivity to Docker Hub
For an **air-gapped environment**, use the Helm value below to pull the `backup-restore-operator` image from your private registry when installing the rancher-backup Helm chart.
-
+
```bash
--set image.repository $REGISTRY/rancher/backup-restore-operator
```
@@ -120,7 +120,7 @@ Kubernetes v1.22, available as an experimental feature of v2.6.3, does not suppo
If this applies, provide the name of the `Secret` object containing the encryption config file. If you only have the encryption config file, but don't have the secret created in this cluster, use the following steps to create the secret:
- 1. Create an [encryption configuration file](reference-guides/backup-restore-configuration/backup-configuration.md#encryption)
+ 1. Create an [encryption configuration file](../../../reference-guides/backup-restore-configuration/backup-configuration.md#encryption)
1. The command below uses a file named `encryption-provider-config.yaml`, with the `--from-file` flag. Run the below once the `EncryptionConfiguration` is saved in a file called `encryption-provider-config.yaml`:
```bash
diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/deploy-apps-across-clusters/fleet.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/deploy-apps-across-clusters/fleet.md
index 19b779d3f9e..426f7b2ea24 100644
--- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/deploy-apps-across-clusters/fleet.md
+++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/deploy-apps-across-clusters/fleet.md
@@ -55,7 +55,7 @@ The Helm chart in the git repository must include its dependencies in the charts
## Troubleshooting
---
-* **Known Issue:** clientSecretName and helmSecretName secrets for Fleet gitrepos are not included in the backup nor restore created by the [backup-restore-operator](../backup-restore-and-disaster-recovery/back-up-rancher.md#1-install-the-rancher-backups-operator). We will update the community once a permanent solution is in place.
+* **Known Issue:** clientSecretName and helmSecretName secrets for Fleet gitrepos are not included in the backup nor restore created by the [backup-restore-operator](../backup-restore-and-disaster-recovery/back-up-rancher.md#1-install-the-rancher-backup-operator). We will update the community once a permanent solution is in place.
* **Temporary Workaround:**
By default, user-defined secrets are not backed up in Fleet. It is necessary to recreate secrets if performing a disaster recovery restore or migration of Rancher into a fresh cluster. To modify resourceSet to include extra resources you want to backup, refer to docs [here](https://github.com/rancher/backup-restore-operator#user-flow).
diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
index 523eeccedbe..b6cc580d0f4 100644
--- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
+++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/alibaba.md
@@ -2,7 +2,7 @@
title: Creating an Aliyun ACK Cluster
---
-You can use Rancher to create a cluster hosted in Alibaba Cloud Kubernetes (ACK). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for ACK, but by default, this cluster driver is `inactive`. In order to launch ACK clusters, you will need to [enable the ACK cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning ACK clusters.
+You can use Rancher to create a cluster hosted in Alibaba Cloud Kubernetes (ACK). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for ACK, but by default, this cluster driver is `inactive`. In order to launch ACK clusters, you will need to [enable the ACK cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning ACK clusters.
## Prerequisites Outside of Rancher
diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
index 84dbac4841f..1133d5600b4 100644
--- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
+++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/huawei.md
@@ -2,7 +2,7 @@
title: Creating a Huawei CCE Cluster
---
-You can use Rancher to create a cluster hosted in Huawei Cloud Container Engine (CCE). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for CCE, but by default, this cluster driver is `inactive`. In order to launch CCE clusters, you will need to [enable the CCE cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning CCE clusters.
+You can use Rancher to create a cluster hosted in Huawei Cloud Container Engine (CCE). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for CCE, but by default, this cluster driver is `inactive`. In order to launch CCE clusters, you will need to [enable the CCE cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning CCE clusters.
## Prerequisites in Huawei
@@ -12,7 +12,7 @@ Deploying to CCE will incur charges.
:::
-1. Find your project ID in Huawei CCE portal. See the CCE documentation on how to [manage your projects](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0066738518.html).
+1. Find your project ID in Huawei CCE portal. See the CCE documentation on how to [manage your projects](https://doc.hcs.huawei.com/api/cce/cce_02_0341.html#cce_02_0341__section17571944123214).
2. Create an [Access Key ID and Secret Access Key](https://support.huaweicloud.com/en-us/usermanual-iam/en-us_topic_0079477318.html).
diff --git a/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md b/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
index 6b14ed1eda4..ed0e11003ae 100644
--- a/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
+++ b/versioned_docs/version-2.6/how-to-guides/new-user-guides/kubernetes-clusters-in-rancher-setup/set-up-clusters-from-hosted-kubernetes-providers/tencent.md
@@ -2,7 +2,7 @@
title: Creating a Tencent TKE Cluster
---
-You can use Rancher to create a cluster hosted in Tencent Kubernetes Engine (TKE). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for TKE, but by default, this cluster driver is `inactive`. In order to launch TKE clusters, you will need to [enable the TKE cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activating-deactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning TKE clusters.
+You can use Rancher to create a cluster hosted in Tencent Kubernetes Engine (TKE). Rancher has already implemented and packaged the [cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md) for TKE, but by default, this cluster driver is `inactive`. In order to launch TKE clusters, you will need to [enable the TKE cluster driver](../../authentication-permissions-and-global-configuration/about-provisioning-drivers/manage-cluster-drivers.md#activatingdeactivating-cluster-drivers). After enabling the cluster driver, you can start provisioning TKE clusters.
## Prerequisites in Tencent