From a2036320dfda8ec753faeda7aa922133f2115509 Mon Sep 17 00:00:00 2001 From: Denise Date: Tue, 5 Mar 2019 11:12:05 -0800 Subject: [PATCH] Update _index.md --- .../networking/interfaces/_index.md | 20 +++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/content/os/v1.x/en/installation/networking/interfaces/_index.md b/content/os/v1.x/en/installation/networking/interfaces/_index.md index 565d88431ad..dc2d7b6fd0b 100644 --- a/content/os/v1.x/en/installation/networking/interfaces/_index.md +++ b/content/os/v1.x/en/installation/networking/interfaces/_index.md @@ -167,9 +167,9 @@ rancher: ### WiFi -_Available as of v1.5+_ +_Available as of v1.5_ -In order to enable wifi access, you can update the cloud-config with the wifi network information. You can use DHCP or STATIC mode. +In order to enable WiFi access, update the `cloud-config` with the WiFi network information. You can use `DHCP` or `STATIC` mode. #### Example of a wireless adapter using DHCP @@ -230,25 +230,25 @@ rancher: scan_ssid: 1 ``` -Adding in wifi access can be done with a system reboot, you only need to restart the `network` service. +When adding in WiFi access, you do not need a system reboot, you only need to restart the `network` service in System Docker. ``` $ sudo system-docker restart network ``` -> **Note:** For Intel wireless adapters, there are some built-in firmware and modules, which prevents you have requiring to install any new modules or firmware. For other adapters, you may need to install additional os kernel-extras. +> **Note:** For Intel wireless adapters, there are some built-in firmware and modules, which prevents requiring to install any new modules or firmware. For other adapters, you may need to install additional os kernel-extras. ### 4G-LTE -_Available as of v1.5+_ +_Available as of v1.5_ -In order to support 4G-LTE, you will need a 4G-LTE module, which can be easily connected to the motherboard. In order to get a good signal, you will also need an external antenna. You can assemble such a device, which can support USB interface and SIM cards slot: +In order to support 4G-LTE, 4G-LTE module will need to be connected to the motherboard and to get a good signal, an external atenna will need to be added. You can assemble such a device, which supports USB interface and SIM cards slot: ![](https://ws1.sinaimg.cn/bmiddle/006tNc79ly1fzcuvhu6zpj30k80qwag1.jpg) -In order to use RancherOS, you will need to use a special ISO built for 4G-LTE support. This ISO has a built-in `modem-manager` service. This special ISO can be downloaded from [here](https://releases.rancher.com/os/latest/4glte/rancheros.iso). +In order to use RancherOS, you will need to use the ISO built for 4G-LTE support. This ISO has a built-in `modem-manager` service and is available with each release. -After booting the ISO, you can see a 4G NIC, such as `wwan0`. You can use the following cloud-config to set the APN parameter to get it working. +After booting the ISO, there will be a 4G NIC, such as `wwan0`. Use the following `cloud-config` to set the APN parameter. ```yaml rancher: @@ -258,10 +258,10 @@ rancher: apn: xxx ``` -If there are any configuration changes, you will only need to restart the `modem-manager` service to apply these changes. +After any configuration changes, restart the `modem-manager` service to apply these changes. ``` $ sudo system-docker restart modem-manager ``` -> **Note:** There are some built-in `udev` rules to allow RancherOS to recognize specific 4G devices. There are still some vendors that may be missing and if you need support for these, please file an issue. +> **Note:** Currently, RancherOS has some built-in rules in `udev` rules to allow RancherOS to recognize specific 4G devices, but there are additional vendors that may be missing. If you need to add these in, please file an issue.