diff --git a/content/k3s/latest/en/installation/installation-requirements/_index.md b/content/k3s/latest/en/installation/installation-requirements/_index.md index 9edee7ed6b4..1b5d14825de 100644 --- a/content/k3s/latest/en/installation/installation-requirements/_index.md +++ b/content/k3s/latest/en/installation/installation-requirements/_index.md @@ -25,7 +25,7 @@ Some OSs have specific requirements: - If you are using **Alpine Linux**, follow [these steps]({{}}/k3s/latest/en/advanced/#additional-preparation-for-alpine-linux-setup) for additional setup. - If you are using **(Red Hat/CentOS) Enterprise Linux**, follow [these steps]({{}}/k3s/latest/en/advanced/#additional-preparation-for-red-hat-centos-enterprise-linux) for additional setup. -For more information on which OSs were tested with Rancher managed K3s clusters, refer to the [Rancher support and maintenance terms.](https://rancher.com/support-matrix/) +For more information on which OSs were tested with Rancher managed K3s clusters, refer to the [Rancher support and maintenance terms.](https://rancher.com/support-maintenance-terms/) ## Hardware diff --git a/content/rancher/v2.0-v2.4/en/admin-settings/k8s-metadata/_index.md b/content/rancher/v2.0-v2.4/en/admin-settings/k8s-metadata/_index.md index f0493a315d9..40233b35676 100644 --- a/content/rancher/v2.0-v2.4/en/admin-settings/k8s-metadata/_index.md +++ b/content/rancher/v2.0-v2.4/en/admin-settings/k8s-metadata/_index.md @@ -77,7 +77,7 @@ However, if you have an [air gap setup,](#air-gap-setups) you will need to mirro ### Air Gap Setups -Rancher relies on a periodic refresh of the `rke-metadata-config` to download new Kubernetes version metadata if it is supported with the current version of the Rancher server. For a table of compatible Kubernetes and Rancher versions, refer to the [service terms section.](https://rancher.com/support-matrix/all-supported-versions/rancher-v2.2.8/) +Rancher relies on a periodic refresh of the `rke-metadata-config` to download new Kubernetes version metadata if it is supported with the current version of the Rancher server. For a table of compatible Kubernetes and Rancher versions, refer to the [service terms section.](https://rancher.com/support-maintenance-terms/all-supported-versions/rancher-v2.2.8/) If you have an air gap setup, you might not be able to get the automatic periodic refresh of the Kubernetes metadata from Rancher's Git repository. In that case, you should disable the periodic refresh to prevent your logs from showing errors. Optionally, you can configure your metadata settings so that Rancher can sync with a local copy of the RKE metadata. diff --git a/content/rancher/v2.0-v2.4/en/best-practices/management/_index.md b/content/rancher/v2.0-v2.4/en/best-practices/management/_index.md index bab5bbce416..d85e5a22cbf 100644 --- a/content/rancher/v2.0-v2.4/en/best-practices/management/_index.md +++ b/content/rancher/v2.0-v2.4/en/best-practices/management/_index.md @@ -62,7 +62,7 @@ Make sure the feature version you are upgrading to is considered "stable" as det Keep in mind that Rancher does End of Life support for old versions, so you will eventually want to upgrade if you want to continue to receive patches. -For more detail on what happens during the Rancher product lifecycle, refer to the [Support Maintenance Terms](https://rancher.com/support-matrix/). +For more detail on what happens during the Rancher product lifecycle, refer to the [Support Maintenance Terms](https://rancher.com/support-maintenance-terms/). # Network Topology These tips can help Rancher work more smoothly with your network. diff --git a/content/rancher/v2.0-v2.4/en/cluster-admin/upgrading-kubernetes/_index.md b/content/rancher/v2.0-v2.4/en/cluster-admin/upgrading-kubernetes/_index.md index 8d9d4280632..51e7fa4b58a 100644 --- a/content/rancher/v2.0-v2.4/en/cluster-admin/upgrading-kubernetes/_index.md +++ b/content/rancher/v2.0-v2.4/en/cluster-admin/upgrading-kubernetes/_index.md @@ -33,7 +33,7 @@ As of Rancher v2.4.0, # Tested Kubernetes Versions -Before a new version of Rancher is released, it's tested with the latest minor versions of Kubernetes to ensure compatibility. For details on which versions of Kubernetes were tested on each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/all-supported-versions/rancher-v2.4.17/) +Before a new version of Rancher is released, it's tested with the latest minor versions of Kubernetes to ensure compatibility. For details on which versions of Kubernetes were tested on each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/all-supported-versions/rancher-v2.4.17/) # How Upgrades Work diff --git a/content/rancher/v2.0-v2.4/en/cluster-provisioning/node-requirements/_index.md b/content/rancher/v2.0-v2.4/en/cluster-provisioning/node-requirements/_index.md index 35af9d5b316..81b0972581d 100644 --- a/content/rancher/v2.0-v2.4/en/cluster-provisioning/node-requirements/_index.md +++ b/content/rancher/v2.0-v2.4/en/cluster-provisioning/node-requirements/_index.md @@ -18,7 +18,7 @@ Make sure the nodes for the Rancher server fulfill the following requirements: Rancher should work with any modern Linux distribution and any modern Docker version. Linux is required for the etcd and controlplane nodes of all downstream clusters. Worker nodes may run Linux or [Windows Server.](#windows-nodes) The capability to use Windows worker nodes in downstream clusters was added in Rancher v2.3.0. -For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) All supported operating systems are 64-bit x86. diff --git a/content/rancher/v2.0-v2.4/en/faq/_index.md b/content/rancher/v2.0-v2.4/en/faq/_index.md index 3bd3d246d3e..d0eb15d8b2a 100644 --- a/content/rancher/v2.0-v2.4/en/faq/_index.md +++ b/content/rancher/v2.0-v2.4/en/faq/_index.md @@ -51,7 +51,7 @@ At this time, we only support Docker. **Does Rancher v2.x support Calico, Contiv, Contrail, Flannel, Weave net, etc., for embedded and imported Kubernetes?** -Out-of-the-box, Rancher provides the following CNI network providers for Kubernetes clusters: Canal, Flannel, Calico and Weave (Weave is available as of v2.2.0). Always refer to the [Rancher Support Matrix](https://rancher.com/support-matrix/) for details about what is officially supported. +Out-of-the-box, Rancher provides the following CNI network providers for Kubernetes clusters: Canal, Flannel, Calico and Weave (Weave is available as of v2.2.0). Always refer to the [Rancher Support Matrix](https://rancher.com/support-maintenance-terms/) for details about what is officially supported.
diff --git a/content/rancher/v2.0-v2.4/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md b/content/rancher/v2.0-v2.4/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md index c73d1e241b2..232e69ee608 100644 --- a/content/rancher/v2.0-v2.4/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md +++ b/content/rancher/v2.0-v2.4/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md @@ -65,7 +65,7 @@ For more information on private registries configuration file for K3s, refer to ### 3. Install K3s -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. diff --git a/content/rancher/v2.0-v2.4/en/installation/requirements/_index.md b/content/rancher/v2.0-v2.4/en/installation/requirements/_index.md index 07fb51a0dc5..ef77bd8dd89 100644 --- a/content/rancher/v2.0-v2.4/en/installation/requirements/_index.md +++ b/content/rancher/v2.0-v2.4/en/installation/requirements/_index.md @@ -27,7 +27,7 @@ The Rancher UI works best in Firefox or Chrome. Rancher should work with any modern Linux distribution. -For details on which OS, Docker, and Kubernetes versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which OS, Docker, and Kubernetes versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) All supported operating systems are 64-bit x86. @@ -45,7 +45,7 @@ For the container runtime, RKE should work with any modern Docker version. For the container runtime, K3s should work with any modern version of Docker or containerd. -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. If you are installing Rancher on a K3s cluster with **Raspbian Buster**, follow [these steps]({{}}/k3s/latest/en/advanced/#enabling-legacy-iptables-on-raspbian-buster) to switch to legacy iptables. diff --git a/content/rancher/v2.0-v2.4/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md b/content/rancher/v2.0-v2.4/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md index 6554f3a5495..7b9a8c3eb30 100644 --- a/content/rancher/v2.0-v2.4/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md +++ b/content/rancher/v2.0-v2.4/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md @@ -19,7 +19,7 @@ For systems without direct internet access, refer to the air gap installation in These instructions assume you have set up two nodes, a load balancer, a DNS record, and an external MySQL database as described in [this section.]({{}}/rancher/v2.0-v2.4/en/installation/resources/k8s-tutorials/infrastructure-tutorials/infra-for-ha-with-external-db/) -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. # Installing Kubernetes ### 1. Install Kubernetes and Set up the K3s Server diff --git a/content/rancher/v2.5/en/admin-settings/k8s-metadata/_index.md b/content/rancher/v2.5/en/admin-settings/k8s-metadata/_index.md index 72eae2c3628..f377c0e6269 100644 --- a/content/rancher/v2.5/en/admin-settings/k8s-metadata/_index.md +++ b/content/rancher/v2.5/en/admin-settings/k8s-metadata/_index.md @@ -57,7 +57,7 @@ If you don't have an air gap setup, you don't need to specify the URL where Ranc However, if you have an [air gap setup,](#air-gap-setups) you will need to mirror the Kubernetes metadata repository in a location available to Rancher. Then you need to change the URL to point to the new location of the JSON file. ### Air Gap Setups -Rancher relies on a periodic refresh of the `rke-metadata-config` to download new Kubernetes version metadata if it is supported with the current version of the Rancher server. For a table of compatible Kubernetes and Rancher versions, refer to the [service terms section.](https://rancher.com/support-matrix/all-supported-versions/rancher-v2.2.8/) +Rancher relies on a periodic refresh of the `rke-metadata-config` to download new Kubernetes version metadata if it is supported with the current version of the Rancher server. For a table of compatible Kubernetes and Rancher versions, refer to the [service terms section.](https://rancher.com/support-maintenance-terms/all-supported-versions/rancher-v2.2.8/) If you have an air gap setup, you might not be able to get the automatic periodic refresh of the Kubernetes metadata from Rancher's Git repository. In that case, you should disable the periodic refresh to prevent your logs from showing errors. Optionally, you can configure your metadata settings so that Rancher can sync with a local copy of the RKE metadata. diff --git a/content/rancher/v2.5/en/cluster-admin/upgrading-kubernetes/_index.md b/content/rancher/v2.5/en/cluster-admin/upgrading-kubernetes/_index.md index d8a65b9efbc..8bc7af3ef14 100644 --- a/content/rancher/v2.5/en/cluster-admin/upgrading-kubernetes/_index.md +++ b/content/rancher/v2.5/en/cluster-admin/upgrading-kubernetes/_index.md @@ -26,7 +26,7 @@ This section covers the following topics: # Tested Kubernetes Versions -Before a new version of Rancher is released, it's tested with the latest minor versions of Kubernetes to ensure compatibility. For details on which versions of Kubernetes were tested on each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/all-supported-versions/rancher-v2.5.9/) +Before a new version of Rancher is released, it's tested with the latest minor versions of Kubernetes to ensure compatibility. For details on which versions of Kubernetes were tested on each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/all-supported-versions/rancher-v2.5.9/) # How Upgrades Work diff --git a/content/rancher/v2.5/en/cluster-provisioning/node-requirements/_index.md b/content/rancher/v2.5/en/cluster-provisioning/node-requirements/_index.md index 20bbea57d74..54e83ca885d 100644 --- a/content/rancher/v2.5/en/cluster-provisioning/node-requirements/_index.md +++ b/content/rancher/v2.5/en/cluster-provisioning/node-requirements/_index.md @@ -20,7 +20,7 @@ Make sure the nodes for the Rancher server fulfill the following requirements: Rancher should work with any modern Linux distribution and any modern Docker version. Linux is required for the etcd and controlplane nodes of all downstream clusters. Worker nodes may run Linux or [Windows Server.](#windows-nodes) -For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) All supported operating systems are 64-bit x86. diff --git a/content/rancher/v2.5/en/faq/_index.md b/content/rancher/v2.5/en/faq/_index.md index deb5a40256a..9e0ab2b6489 100644 --- a/content/rancher/v2.5/en/faq/_index.md +++ b/content/rancher/v2.5/en/faq/_index.md @@ -52,7 +52,7 @@ At this time, we only support Docker. **Does Rancher v2.x support Calico, Contiv, Contrail, Flannel, Weave net, etc., for embedded and registered Kubernetes?** -Out-of-the-box, Rancher provides the following CNI network providers for Kubernetes clusters: Canal, Flannel, Calico and Weave. Always refer to the [Rancher Support Matrix](https://rancher.com/support-matrix/) for details about what is officially supported. +Out-of-the-box, Rancher provides the following CNI network providers for Kubernetes clusters: Canal, Flannel, Calico and Weave. Always refer to the [Rancher Support Matrix](https://rancher.com/support-maintenance-terms/) for details about what is officially supported.
diff --git a/content/rancher/v2.5/en/faq/deprecated-features-25x/_index.md b/content/rancher/v2.5/en/faq/deprecated-features-25x/_index.md index 1202e1a4add..e13380c31f2 100644 --- a/content/rancher/v2.5/en/faq/deprecated-features-25x/_index.md +++ b/content/rancher/v2.5/en/faq/deprecated-features-25x/_index.md @@ -7,7 +7,7 @@ aliases: ### What is Rancher's Deprecation policy? -Starting in Rancher 2.5 we have published our official deprecation policy in the support [terms of service](https://rancher.com/support-matrix). +Starting in Rancher 2.5 we have published our official deprecation policy in the support [terms of service](https://rancher.com/support-maintenance-terms). ### Where can I find out which features have been deprecated in Rancher 2.5? diff --git a/content/rancher/v2.5/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md b/content/rancher/v2.5/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md index 7ffaf0c46d8..53405d3762e 100644 --- a/content/rancher/v2.5/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md +++ b/content/rancher/v2.5/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md @@ -64,7 +64,7 @@ For more information on private registries configuration file for K3s, refer to ### 3. Install K3s -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. diff --git a/content/rancher/v2.5/en/installation/requirements/_index.md b/content/rancher/v2.5/en/installation/requirements/_index.md index 79d818af7cf..887226232ff 100644 --- a/content/rancher/v2.5/en/installation/requirements/_index.md +++ b/content/rancher/v2.5/en/installation/requirements/_index.md @@ -44,9 +44,9 @@ Rancher should work with any modern Linux distribution. Docker is required for nodes that will run RKE Kubernetes clusters. It is not required for RancherD or RKE2 Kubernetes installs. -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) -For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) All supported operating systems are 64-bit x86. @@ -66,7 +66,7 @@ For the container runtime, RKE should work with any modern Docker version. For the container runtime, K3s should work with any modern version of Docker or containerd. -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. If you are installing Rancher on a K3s cluster with **Raspbian Buster**, follow [these steps]({{}}/k3s/latest/en/advanced/#enabling-legacy-iptables-on-raspbian-buster) to switch to legacy iptables. @@ -86,7 +86,7 @@ Docker is not required for RancherD installs. _The RKE2 install is available as of v2.5.6._ -For details on which OS versions were tested with RKE2, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which OS versions were tested with RKE2, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) Docker is not required for RKE2 installs. diff --git a/content/rancher/v2.5/en/installation/resources/k8s-tutorials/ha-rke2/_index.md b/content/rancher/v2.5/en/installation/resources/k8s-tutorials/ha-rke2/_index.md index b414cf0ebbd..390dfe259ee 100644 --- a/content/rancher/v2.5/en/installation/resources/k8s-tutorials/ha-rke2/_index.md +++ b/content/rancher/v2.5/en/installation/resources/k8s-tutorials/ha-rke2/_index.md @@ -16,7 +16,7 @@ These instructions assume you have set up three nodes, a load balancer, and a DN Note that in order for RKE2 to work correctly with the load balancer, you need to set up two listeners: one for the supervisor on port 9345, and one for the Kubernetes API on port 6443. -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) To specify the RKE2 version, use the INSTALL_RKE2_VERSION environment variable when running the RKE2 installation script. +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the RKE2 version, use the INSTALL_RKE2_VERSION environment variable when running the RKE2 installation script. # Installing Kubernetes ### 1. Install Kubernetes and Set up the RKE2 Server diff --git a/content/rancher/v2.5/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md b/content/rancher/v2.5/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md index cd8c0941d10..9c07f5478c8 100644 --- a/content/rancher/v2.5/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md +++ b/content/rancher/v2.5/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md @@ -19,7 +19,7 @@ For systems without direct internet access, refer to the air gap installation in These instructions assume you have set up two nodes, a load balancer, a DNS record, and an external MySQL database as described in [this section.]({{}}/rancher/v2.5/en/installation/resources/k8s-tutorials/infrastructure-tutorials/infra-for-ha-with-external-db/) -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. # Installing Kubernetes ### 1. Install Kubernetes and Set up the K3s Server diff --git a/content/rancher/v2.6/en/admin-settings/k8s-metadata/_index.md b/content/rancher/v2.6/en/admin-settings/k8s-metadata/_index.md index e57fb1e5b6d..29302bf7013 100644 --- a/content/rancher/v2.6/en/admin-settings/k8s-metadata/_index.md +++ b/content/rancher/v2.6/en/admin-settings/k8s-metadata/_index.md @@ -61,7 +61,7 @@ However, if you have an [air gap setup,](#air-gap-setups) you will need to mirro ### Air Gap Setups -Rancher relies on a periodic refresh of the `rke-metadata-config` to download new Kubernetes version metadata if it is supported with the current version of the Rancher server. For a table of compatible Kubernetes and Rancher versions, refer to the [service terms section.](https://rancher.com/support-matrix/all-supported-versions/rancher-v2.2.8/) +Rancher relies on a periodic refresh of the `rke-metadata-config` to download new Kubernetes version metadata if it is supported with the current version of the Rancher server. For a table of compatible Kubernetes and Rancher versions, refer to the [service terms section.](https://rancher.com/support-maintenance-terms/all-supported-versions/rancher-v2.2.8/) If you have an air gap setup, you might not be able to get the automatic periodic refresh of the Kubernetes metadata from Rancher's Git repository. In that case, you should disable the periodic refresh to prevent your logs from showing errors. Optionally, you can configure your metadata settings so that Rancher can sync with a local copy of the RKE metadata. diff --git a/content/rancher/v2.6/en/cluster-admin/editing-clusters/rke-config-reference/_index.md b/content/rancher/v2.6/en/cluster-admin/editing-clusters/rke-config-reference/_index.md index 4980746f06a..2b530a8db5e 100644 --- a/content/rancher/v2.6/en/cluster-admin/editing-clusters/rke-config-reference/_index.md +++ b/content/rancher/v2.6/en/cluster-admin/editing-clusters/rke-config-reference/_index.md @@ -169,7 +169,7 @@ Configures whether nodes are allowed to run versions of Docker that Rancher does If you choose to require a supported Docker version, Rancher will stop pods from running on nodes that don't have a supported Docker version installed. -For details on which Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) ### Docker Root Directory diff --git a/content/rancher/v2.6/en/cluster-admin/upgrading-kubernetes/_index.md b/content/rancher/v2.6/en/cluster-admin/upgrading-kubernetes/_index.md index 5b3015ffe19..03e871e5b08 100644 --- a/content/rancher/v2.6/en/cluster-admin/upgrading-kubernetes/_index.md +++ b/content/rancher/v2.6/en/cluster-admin/upgrading-kubernetes/_index.md @@ -24,7 +24,7 @@ This section covers the following topics: # Tested Kubernetes Versions -Before a new version of Rancher is released, it's tested with the latest minor versions of Kubernetes to ensure compatibility. For details on which versions of Kubernetes were tested on each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/all-supported-versions/rancher-v2.6.0/) +Before a new version of Rancher is released, it's tested with the latest minor versions of Kubernetes to ensure compatibility. For details on which versions of Kubernetes were tested on each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/all-supported-versions/rancher-v2.6.0/) # How Upgrades Work diff --git a/content/rancher/v2.6/en/cluster-provisioning/node-requirements/_index.md b/content/rancher/v2.6/en/cluster-provisioning/node-requirements/_index.md index c17f0e5343d..bd24c9adeb8 100644 --- a/content/rancher/v2.6/en/cluster-provisioning/node-requirements/_index.md +++ b/content/rancher/v2.6/en/cluster-provisioning/node-requirements/_index.md @@ -18,7 +18,7 @@ Make sure the nodes for the Rancher server fulfill the following requirements: Rancher should work with any modern Linux distribution and any modern Docker version. Linux is required for the etcd and controlplane nodes of all downstream clusters. Worker nodes may run Linux or [Windows Server.](#windows-nodes) -For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) All supported operating systems are 64-bit x86. diff --git a/content/rancher/v2.6/en/faq/_index.md b/content/rancher/v2.6/en/faq/_index.md index a530934d152..4fc0889d102 100644 --- a/content/rancher/v2.6/en/faq/_index.md +++ b/content/rancher/v2.6/en/faq/_index.md @@ -49,7 +49,7 @@ At this time, we only support Docker. **Does Rancher v2.x support Calico, Contiv, Contrail, Flannel, Weave net, etc., for embedded and registered Kubernetes?** -Out-of-the-box, Rancher provides the following CNI network providers for Kubernetes clusters: Canal, Flannel, Calico and Weave. Always refer to the [Rancher Support Matrix](https://rancher.com/support-matrix/) for details about what is officially supported. +Out-of-the-box, Rancher provides the following CNI network providers for Kubernetes clusters: Canal, Flannel, Calico and Weave. Always refer to the [Rancher Support Matrix](https://rancher.com/support-maintenance-terms/) for details about what is officially supported.
diff --git a/content/rancher/v2.6/en/faq/deprecated-features-25x/_index.md b/content/rancher/v2.6/en/faq/deprecated-features-25x/_index.md index 2b4910cb112..a30b421224b 100644 --- a/content/rancher/v2.6/en/faq/deprecated-features-25x/_index.md +++ b/content/rancher/v2.6/en/faq/deprecated-features-25x/_index.md @@ -5,7 +5,7 @@ weight: 100 ### What is Rancher's Deprecation policy? -Starting in Rancher 2.5 we have published our official deprecation policy in the support [terms of service](https://rancher.com/support-matrix). +Starting in Rancher 2.5 we have published our official deprecation policy in the support [terms of service](https://rancher.com/support-maintenance-terms). ### Where can I find out which features have been deprecated in Rancher 2.5? diff --git a/content/rancher/v2.6/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md b/content/rancher/v2.6/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md index d17eedff838..f58ef372b27 100644 --- a/content/rancher/v2.6/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md +++ b/content/rancher/v2.6/en/installation/other-installation-methods/air-gap/launch-kubernetes/_index.md @@ -61,7 +61,7 @@ For more information on private registries configuration file for K3s, refer to ### 3. Install K3s -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. diff --git a/content/rancher/v2.6/en/installation/requirements/_index.md b/content/rancher/v2.6/en/installation/requirements/_index.md index 43281fb35c9..6ca43607b08 100644 --- a/content/rancher/v2.6/en/installation/requirements/_index.md +++ b/content/rancher/v2.6/en/installation/requirements/_index.md @@ -40,9 +40,9 @@ Rancher should work with any modern Linux distribution. Docker is required for nodes that will run RKE Kubernetes clusters. It is not required for Kubernetes installs. -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) -For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which OS and Docker versions were tested with each Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) All supported operating systems are 64-bit x86. @@ -62,7 +62,7 @@ For the container runtime, RKE should work with any modern Docker version. For the container runtime, K3s should work with any modern version of Docker or containerd. -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. If you are installing Rancher on a K3s cluster with **Raspbian Buster**, follow [these steps]({{}}/k3s/latest/en/advanced/#enabling-legacy-iptables-on-raspbian-buster) to switch to legacy iptables. @@ -72,7 +72,7 @@ If you are installing Rancher on a K3s cluster with Alpine Linux, follow [these ### RKE2 Specific Requirements -For details on which OS versions were tested with RKE2, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) +For details on which OS versions were tested with RKE2, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) Docker is not required for RKE2 installs. diff --git a/content/rancher/v2.6/en/installation/resources/k8s-tutorials/ha-rke2/_index.md b/content/rancher/v2.6/en/installation/resources/k8s-tutorials/ha-rke2/_index.md index 97ac82b7368..a4a4eeed8f8 100644 --- a/content/rancher/v2.6/en/installation/resources/k8s-tutorials/ha-rke2/_index.md +++ b/content/rancher/v2.6/en/installation/resources/k8s-tutorials/ha-rke2/_index.md @@ -13,7 +13,7 @@ These instructions assume you have set up three nodes, a load balancer, and a DN Note that in order for RKE2 to work correctly with the load balancer, you need to set up two listeners: one for the supervisor on port 9345, and one for the Kubernetes API on port 6443. -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) To specify the RKE2 version, use the INSTALL_RKE2_VERSION environment variable when running the RKE2 installation script. +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the RKE2 version, use the INSTALL_RKE2_VERSION environment variable when running the RKE2 installation script. # Installing Kubernetes ### 1. Install Kubernetes and Set up the RKE2 Server diff --git a/content/rancher/v2.6/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md b/content/rancher/v2.6/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md index ac5a0e50afa..bce53d8b157 100644 --- a/content/rancher/v2.6/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md +++ b/content/rancher/v2.6/en/installation/resources/k8s-tutorials/ha-with-external-db/_index.md @@ -19,7 +19,7 @@ For systems without direct internet access, refer to the air gap installation in These instructions assume you have set up two nodes, a load balancer, a DNS record, and an external MySQL database as described in [this section.]({{}}/rancher/v2.6/en/installation/resources/k8s-tutorials/infrastructure-tutorials/infra-for-ha-with-external-db/) -Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. +Rancher needs to be installed on a supported Kubernetes version. To find out which versions of Kubernetes are supported for your Rancher version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/) To specify the K3s version, use the INSTALL_K3S_VERSION environment variable when running the K3s installation script. # Installing Kubernetes ### 1. Install Kubernetes and Set up the K3s Server diff --git a/content/rke/latest/en/installation/_index.md b/content/rke/latest/en/installation/_index.md index 39ce4713e98..215ea8e025e 100644 --- a/content/rke/latest/en/installation/_index.md +++ b/content/rke/latest/en/installation/_index.md @@ -96,7 +96,7 @@ $ port upgrade rke The Kubernetes cluster components are launched using Docker on a Linux distro. You can use any Linux you want, as long as you can install Docker on it. -> For information on which Docker versions were tested with your version of RKE, refer to the [terms of service](https://rancher.com/support-matrix) for installing Rancher on RKE. +> For information on which Docker versions were tested with your version of RKE, refer to the [terms of service](https://rancher.com/support-maintenance-terms) for installing Rancher on RKE. Review the [OS requirements]({{}}/rke/latest/en/installation/os/) and configure each node appropriately. diff --git a/content/rke/latest/en/os/_index.md b/content/rke/latest/en/os/_index.md index b5c5230322b..d60aa9c39ed 100644 --- a/content/rke/latest/en/os/_index.md +++ b/content/rke/latest/en/os/_index.md @@ -38,7 +38,7 @@ weight: 5 ### General Linux Requirements -RKE runs on almost any Linux OS with Docker installed. For details on which OS and Docker versions were tested with each version, refer to the [support maintenance terms.](https://rancher.com/support-matrix/). +RKE runs on almost any Linux OS with Docker installed. For details on which OS and Docker versions were tested with each version, refer to the [support maintenance terms.](https://rancher.com/support-maintenance-terms/). - [SSH user]({{}}/rke/latest/en/config-options/nodes/#ssh-user) - The SSH user used for node access must be a member of the `docker` group on the node: