diff --git a/docs/reference-guides/rancher-security/hardening-guides/k3s-hardening-guide/k3s-self-assessment-guide-with-cis-v1.7-k8s-v1.25.md b/docs/reference-guides/rancher-security/hardening-guides/k3s-hardening-guide/k3s-self-assessment-guide-with-cis-v1.7-k8s-v1.25.md index 16614a7e520..548ba621080 100644 --- a/docs/reference-guides/rancher-security/hardening-guides/k3s-hardening-guide/k3s-self-assessment-guide-with-cis-v1.7-k8s-v1.25.md +++ b/docs/reference-guides/rancher-security/hardening-guides/k3s-hardening-guide/k3s-self-assessment-guide-with-cis-v1.7-k8s-v1.25.md @@ -1,3148 +1,3211 @@ ---- -title: K3s Self-Assessment Guide - CIS Benchmark v1.7 - K8s v1.25 ---- - -This document is a companion to the [K3s Hardening Guide](../../../../pages-for-subheaders/k3s-hardening-guide.md), which provides prescriptive guidance on how to harden K3s clusters that are running in production and managed by Rancher. This benchmark guide helps you evaluate the security of a hardened cluster against each control in the CIS Kubernetes Benchmark. - -This guide corresponds to the following versions of Rancher, CIS Benchmarks, and Kubernetes: - -| Rancher Version | CIS Benchmark Version | Kubernetes Version | -|-----------------|-----------------------|--------------------| -| Rancher v2.7 | Benchmark v1.7 | Kubernetes v1.25 | - -This document is for Rancher operators, security teams, auditors and decision makers. - -For more information about each control, including detailed descriptions and remediations for failing tests, refer to the corresponding section of the CIS Kubernetes Benchmark v1.7. You can download the benchmark, after creating a free account, at [Center for Internet Security (CIS)](https://www.cisecurity.org/benchmark/kubernetes/). - -## Testing Methodology - -Each control in the CIS Kubernetes Benchmark was evaluated against a K3s cluster that was configured according to the accompanying hardening guide. - -Where control audits differ from the original CIS benchmark, the audit commands specific to K3s are provided for testing. - -These are the possible results for each control: - -- **Pass** - The K3s cluster passes the audit outlined in the benchmark. -- **Not Applicable** - The control is not applicable to K3s because of how it is designed to operate. The remediation section explains why. -- **Warn** - The control is manual in the CIS benchmark and it depends on the cluster's use-case or some other factor that must be determined by the cluster operator. These controls have been evaluated to ensure K3s doesn't prevent their implementation, but no further configuration or auditing of the cluster has been performed. - -This guide makes the assumption that K3s is running as a Systemd unit. Your installation may vary. Adjust the "audit" commands to fit your scenario. - -:::note - -This guide only covers `automated` (previously called `scored`) tests. - -::: - -### Controls - -## 1.1 Control Plane Node Configuration Files -### 1.1.1 Ensure that the API server pod specification file permissions are set to 644 or more restrictive (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the -control plane node. -For example, chmod 644 /etc/kubernetes/manifests/kube-apiserver.yaml - -### 1.1.2 Ensure that the API server pod specification file ownership is set to root:root (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, chown root:root /etc/kubernetes/manifests/kube-apiserver.yaml - -### 1.1.3 Ensure that the controller manager pod specification file permissions are set to 644 or more restrictive (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, chmod 644 /etc/kubernetes/manifests/kube-controller-manager.yaml - -### 1.1.4 Ensure that the controller manager pod specification file ownership is set to root:root (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, chown root:root /etc/kubernetes/manifests/kube-controller-manager.yaml - -### 1.1.5 Ensure that the scheduler pod specification file permissions are set to 644 or more restrictive (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, chmod 644 /etc/kubernetes/manifests/kube-scheduler.yaml - -### 1.1.6 Ensure that the scheduler pod specification file ownership is set to root:root (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, chown root:root /etc/kubernetes/manifests/kube-scheduler.yaml - -### 1.1.7 Ensure that the etcd pod specification file permissions are set to 644 or more restrictive (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chmod 644 /etc/kubernetes/manifests/etcd.yaml - -### 1.1.8 Ensure that the etcd pod specification file ownership is set to root:root (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chown root:root /etc/kubernetes/manifests/etcd.yaml - -### 1.1.9 Ensure that the Container Network Interface file permissions are set to 644 or more restrictive (Manual) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, chmod 644 - -### 1.1.10 Ensure that the Container Network Interface file ownership is set to root:root (Manual) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chown root:root - -### 1.1.11 Ensure that the etcd data directory permissions are set to 700 or more restrictive (Automated) - - -**Result:** pass - -**Remediation:** -On the etcd server node, get the etcd data directory, passed as an argument --data-dir, -from the command 'ps -ef | grep etcd'. -Run the below command (based on the etcd data directory found above). For example, -chmod 700 /var/lib/etcd - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 1.1.11 -``` - -**Expected Result**: - -```console -'700' is equal to '700' -``` - -**Returned Value**: - -```console -700 -``` - -### 1.1.12 Ensure that the etcd data directory ownership is set to etcd:etcd (Automated) - - -**Result:** Not Applicable - -**Remediation:** -On the etcd server node, get the etcd data directory, passed as an argument --data-dir, -from the command 'ps -ef | grep etcd'. -Run the below command (based on the etcd data directory found above). -For example, chown etcd:etcd /var/lib/etcd - -### 1.1.13 Ensure that the admin.conf file permissions are set to 600 or more restrictive (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, chmod 600 /var/lib/rancher/k3s/server/cred/admin.kubeconfig - -### 1.1.14 Ensure that the admin.conf file ownership is set to root:root (Automated) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, chown root:root /etc/kubernetes/admin.conf - -**Audit:** - -```bash -/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/admin.kubeconfig; then stat -c %U:%G /var/lib/rancher/k3s/server/cred/admin.kubeconfig; fi' -``` - -**Expected Result**: - -```console -'root:root' is equal to 'root:root' -``` - -**Returned Value**: - -```console -root:root -``` - -### 1.1.15 Ensure that the scheduler.conf file permissions are set to 644 or more restrictive (Automated) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chmod 644 scheduler - -**Audit:** - -```bash -/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; fi' -``` - -**Expected Result**: - -```console -permissions has permissions 644, expected 644 or more restrictive -``` - -**Returned Value**: - -```console -permissions=644 -``` - -### 1.1.16 Ensure that the scheduler.conf file ownership is set to root:root (Automated) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chown root:root scheduler - -**Audit:** - -```bash -/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; then stat -c %U:%G /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; fi' -``` - -**Expected Result**: - -```console -'root:root' is present -``` - -**Returned Value**: - -```console -root:root -``` - -### 1.1.17 Ensure that the controller-manager.conf file permissions are set to 644 or more restrictive (Automated) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chmod 644 controllermanager - -**Audit:** - -```bash -/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/controller.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/server/cred/controller.kubeconfig; fi' -``` - -**Expected Result**: - -```console -permissions has permissions 644, expected 644 or more restrictive -``` - -**Returned Value**: - -```console -permissions=644 -``` - -### 1.1.18 Ensure that the controller-manager.conf file ownership is set to root:root (Automated) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chown root:root controllermanager - -**Audit:** - -```bash -stat -c %U:%G /var/lib/rancher/k3s/server/tls -``` - -**Expected Result**: - -```console -'root:root' is equal to 'root:root' -``` - -**Returned Value**: - -```console -root:root -``` - -### 1.1.19 Ensure that the Kubernetes PKI directory and file ownership is set to root:root (Automated) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chown -R root:root /etc/kubernetes/pki/ - -**Audit:** - -```bash -find /var/lib/rancher/k3s/server/tls | xargs stat -c %U:%G -``` - -**Expected Result**: - -```console -'root:root' is present -``` - -**Returned Value**: - -```console -root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root root:root -``` - -### 1.1.20 Ensure that the Kubernetes PKI certificate file permissions are set to 644 or more restrictive (Manual) - - -**Result:** warn - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chmod -R 644 /etc/kubernetes/pki/*.crt - -**Audit:** - -```bash -stat -c %n %a /var/lib/rancher/k3s/server/tls/*.crt -``` - -### 1.1.21 Ensure that the Kubernetes PKI key file permissions are set to 600 (Manual) - - -**Result:** warn - -**Remediation:** -Run the below command (based on the file location on your system) on the control plane node. -For example, -chmod -R 600 /etc/kubernetes/pki/*.key - -**Audit:** - -```bash -stat -c %n %a /var/lib/rancher/k3s/server/tls/*.key -``` - -## 1.2 API Server -### 1.2.1 Ensure that the --anonymous-auth argument is set to false (Manual) - - -**Result:** warn - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the below parameter. ---anonymous-auth=false - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'anonymous-auth' -``` - -### 1.2.2 Ensure that the --token-auth-file parameter is not set (Automated) - - -**Result:** pass - -**Remediation:** -Follow the documentation and configure alternate mechanisms for authentication. Then, -edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and remove the --token-auth-file= parameter. - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep -v grep -``` - -**Expected Result**: - -```console -'--token-auth-file' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.3 Ensure that the --DenyServiceExternalIPs is not set (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and remove the `DenyServiceExternalIPs` -from enabled admission plugins. - -**Audit:** - -```bash -/bin/ps -ef | grep containerd | grep -v grep -``` - -**Expected Result**: - -```console -'--enable-admission-plugins' is present OR '--enable-admission-plugins' is not present -``` - -**Returned Value**: - -```console -root 519 1 0 22:09 ? 00:00:00 /usr/bin/containerd root 801 1 0 22:09 ? 00:00:00 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock root 3864 1 0 22:31 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id d00174abbc275f6bb85c7f0be1d3154b9c91982a10b9dba6b5cb280f4d4c531d -address /run/k3s/containerd/containerd.sock root 4105 1 0 22:31 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id 7c2b546b4d2380bcb51278661f34cff94fad2ba06978e13f8f1b92dafcc89d43 -address /run/k3s/containerd/containerd.sock root 4206 1 0 22:31 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id 68d8a55ff4663985be004608dbf78b0362f5522e18490c81d4c8dc9963de1556 -address /run/k3s/containerd/containerd.sock root 5374 1 0 22:31 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id ca0ae9e0b37dfd7b1ce05f72e1bc5a1be8f5cb08f2b4543081536de3bdbc925d -address /run/k3s/containerd/containerd.sock root 5443 1 0 22:31 ? 00:00:01 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id 3ea3c1cdbbd5adb8efd5c67a46aadd0fca9918dc0ad1f7cafe38b83171e3dc1b -address /run/k3s/containerd/containerd.sock root 7130 1 0 22:32 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id 4d838297d35a31003106ac5989c3547433985bb2964b47baad12cee6e375645e -address /run/k3s/containerd/containerd.sock root 7639 1 0 22:32 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id 341cb9bcd8486aa2f1acb8e1ae51baebd630ac6ed266643266c34d677f61c7d0 -address /run/k3s/containerd/containerd.sock root 10308 1 0 23:17 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id c534fbee8e0d06fd9b29bf8fc70a138975c6b18db25f1faf2615677dfdb4199e -address /run/k3s/containerd/containerd.sock root 11370 1 0 23:18 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id 4ff4b8776dac7a35b83616d341dbe4d5a689ac7fb9b8eee8db5978e3968380ea -address /run/k3s/containerd/containerd.sock root 13736 13723 2 23:21 ? 00:00:10 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd root 16022 1 0 23:29 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id 9027256349086e458119478e5e00384b1b76fbf5e6dbee23699f596a88d9f2bc -address /run/k3s/containerd/containerd.sock root 16159 1 0 23:29 ? 00:00:00 /var/lib/rancher/k3s/data/630c40ff866a3db218a952ebd4fd2a5cfe1543a1a467e738cb46a2ad4012d6f1/bin/containerd-shim-runc-v2 -namespace k8s.io -id 929bf369fc5881654f4c1925624151ddb7cea51073267b8d213d966ba45406f3 -address /run/k3s/containerd/containerd.sock -``` - -### 1.2.4 Ensure that the --kubelet-https argument is set to true (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and remove the --kubelet-https parameter. - -### 1.2.5 Ensure that the --kubelet-client-certificate and --kubelet-client-key arguments are set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Follow the Kubernetes documentation and set up the TLS connection between the -apiserver and kubelets. Then, edit API server pod specification file -/etc/kubernetes/manifests/kube-apiserver.yaml on the control plane node and set the -kubelet client certificate and key parameters as below. ---kubelet-client-certificate= ---kubelet-client-key= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'kubelet-certificate-authority' -``` - -**Expected Result**: - -```console -'--kubelet-client-certificate' is present AND '--kubelet-client-key' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.6 Ensure that the --kubelet-certificate-authority argument is set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Follow the Kubernetes documentation and setup the TLS connection between -the apiserver and kubelets. Then, edit the API server pod specification file -/etc/kubernetes/manifests/kube-apiserver.yaml on the control plane node and set the ---kubelet-certificate-authority parameter to the path to the cert file for the certificate authority. ---kubelet-certificate-authority= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'kubelet-certificate-authority' -``` - -**Expected Result**: - -```console -'--kubelet-certificate-authority' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.7 Ensure that the --authorization-mode argument is not set to AlwaysAllow (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --authorization-mode parameter to values other than AlwaysAllow. -One such example could be as below. ---authorization-mode=RBAC - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode' -``` - -**Expected Result**: - -```console -'--authorization-mode' does not have 'AlwaysAllow' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.8 Ensure that the --authorization-mode argument includes Node (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --authorization-mode parameter to a value that includes Node. ---authorization-mode=Node,RBAC - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode' -``` - -**Expected Result**: - -```console -'--authorization-mode' has 'Node' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.9 Ensure that the --authorization-mode argument includes RBAC (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --authorization-mode parameter to a value that includes RBAC, -for example `--authorization-mode=Node,RBAC`. - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode' -``` - -**Expected Result**: - -```console -'--authorization-mode' has 'RBAC' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.10 Ensure that the admission control plugin EventRateLimit is set (Manual) - - -**Result:** warn - -**Remediation:** -Follow the Kubernetes documentation and set the desired limits in a configuration file. -Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -and set the below parameters. ---enable-admission-plugins=...,EventRateLimit,... ---admission-control-config-file= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins' -``` - -**Expected Result**: - -```console -'--enable-admission-plugins' has 'EventRateLimit' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.11 Ensure that the admission control plugin AlwaysAdmit is not set (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and either remove the --enable-admission-plugins parameter, or set it to a -value that does not include AlwaysAdmit. - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins' -``` - -**Expected Result**: - -```console -'--enable-admission-plugins' does not have 'AlwaysAdmit' OR '--enable-admission-plugins' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.12 Ensure that the admission control plugin AlwaysPullImages is set (Manual) - - -**Result:** warn - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --enable-admission-plugins parameter to include -AlwaysPullImages. ---enable-admission-plugins=...,AlwaysPullImages,... - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins' -``` - -**Expected Result**: - -```console -'--enable-admission-plugins' has 'AlwaysPullImages' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.13 Ensure that the admission control plugin SecurityContextDeny is set if PodSecurityPolicy is not used (Manual) - - -**Result:** warn - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --enable-admission-plugins parameter to include -SecurityContextDeny, unless PodSecurityPolicy is already in place. ---enable-admission-plugins=...,SecurityContextDeny,... - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins' -``` - -**Expected Result**: - -```console -'--enable-admission-plugins' has 'SecurityContextDeny' OR '--enable-admission-plugins' has 'PodSecurityPolicy' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.14 Ensure that the admission control plugin ServiceAccount is set (Automated) - - -**Result:** pass - -**Remediation:** -Follow the documentation and create ServiceAccount objects as per your environment. -Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and ensure that the --disable-admission-plugins parameter is set to a -value that does not include ServiceAccount. - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'ServiceAccount' -``` - -**Expected Result**: - -```console -'--disable-admission-plugins' is present OR '--disable-admission-plugins' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.15 Ensure that the admission control plugin NamespaceLifecycle is set (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --disable-admission-plugins parameter to -ensure it does not include NamespaceLifecycle. - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep -v grep -``` - -**Expected Result**: - -```console -'--disable-admission-plugins' is present OR '--disable-admission-plugins' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.16 Ensure that the admission control plugin NodeRestriction is set (Automated) - - -**Result:** pass - -**Remediation:** -Follow the Kubernetes documentation and configure NodeRestriction plug-in on kubelets. -Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --enable-admission-plugins parameter to a -value that includes NodeRestriction. ---enable-admission-plugins=...,NodeRestriction,... - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins' -``` - -**Expected Result**: - -```console -'--enable-admission-plugins' has 'NodeRestriction' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.17 Ensure that the --secure-port argument is not set to 0 (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and either remove the --secure-port parameter or -set it to a different (non-zero) desired port. - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'secure-port' -``` - -**Expected Result**: - -```console -'--secure-port' is greater than 0 OR '--secure-port' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.18 Ensure that the --profiling argument is set to false (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the below parameter. ---profiling=false - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'profiling' -``` - -**Expected Result**: - -```console -'--profiling' is equal to 'false' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.19 Ensure that the --audit-log-path argument is set (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --audit-log-path parameter to a suitable path and -file where you would like audit logs to be written, for example, ---audit-log-path=/var/log/apiserver/audit.log - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'audit-log-path' -``` - -**Expected Result**: - -```console -'--audit-log-path' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.20 Ensure that the --audit-log-maxage argument is set to 30 or as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --audit-log-maxage parameter to 30 -or as an appropriate number of days, for example, ---audit-log-maxage=30 - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'audit-log-maxage' -``` - -**Expected Result**: - -```console -'--audit-log-maxage' is greater or equal to 30 -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.21 Ensure that the --audit-log-maxbackup argument is set to 10 or as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --audit-log-maxbackup parameter to 10 or to an appropriate -value. For example, ---audit-log-maxbackup=10 - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'audit-log-maxbackup' -``` - -**Expected Result**: - -```console -'--audit-log-maxbackup' is greater or equal to 10 -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.22 Ensure that the --audit-log-maxsize argument is set to 100 or as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --audit-log-maxsize parameter to an appropriate size in MB. -For example, to set it as 100 MB, --audit-log-maxsize=100 - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'audit-log-maxsize' -``` - -**Expected Result**: - -```console -'--audit-log-maxsize' is greater or equal to 100 -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.23 Ensure that the --request-timeout argument is set as appropriate (Manual) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -and set the below parameter as appropriate and if needed. -For example, --request-timeout=300s - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'request-timeout' -``` - -**Expected Result**: - -```console -'--request-timeout' is not present OR '--request-timeout' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.24 Ensure that the --service-account-lookup argument is set to true (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the below parameter. ---service-account-lookup=true -Alternatively, you can delete the --service-account-lookup parameter from this file so -that the default takes effect. - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'service-account-lookup' -``` - -**Expected Result**: - -```console -'--service-account-lookup' is not present OR '--service-account-lookup' is equal to 'true' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.25 Ensure that the --service-account-key-file argument is set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --service-account-key-file parameter -to the public key file for service accounts. For example, ---service-account-key-file= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'service-account-key-file' -``` - -**Expected Result**: - -```console -'--service-account-key-file' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.26 Ensure that the --etcd-certfile and --etcd-keyfile arguments are set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Follow the Kubernetes documentation and set up the TLS connection between the apiserver and etcd. -Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the etcd certificate and key file parameters. ---etcd-certfile= ---etcd-keyfile= - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 1.2.29 -``` - -**Expected Result**: - -```console -'--etcd-certfile' is present AND '--etcd-keyfile' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.27 Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Follow the Kubernetes documentation and set up the TLS connection on the apiserver. -Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the TLS certificate and private key file parameters. ---tls-cert-file= ---tls-private-key-file= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep -A1 'Running kube-apiserver' | tail -n2 -``` - -**Expected Result**: - -```console -'--tls-cert-file' is present AND '--tls-private-key-file' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-scheduler --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259" -``` - -### 1.2.28 Ensure that the --client-ca-file argument is set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Follow the Kubernetes documentation and set up the TLS connection on the apiserver. -Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the client certificate authority file. ---client-ca-file= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'client-ca-file' -``` - -**Expected Result**: - -```console -'--client-ca-file' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.29 Ensure that the --etcd-cafile argument is set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Follow the Kubernetes documentation and set up the TLS connection between the apiserver and etcd. -Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the etcd certificate authority file parameter. ---etcd-cafile= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-cafile' -``` - -**Expected Result**: - -```console -'--etcd-cafile' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.30 Ensure that the --encryption-provider-config argument is set as appropriate (Manual) - - -**Result:** pass - -**Remediation:** -Follow the Kubernetes documentation and configure a EncryptionConfig file. -Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the --encryption-provider-config parameter to the path of that file. -For example, --encryption-provider-config= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'encryption-provider-config' -``` - -**Expected Result**: - -```console -'--encryption-provider-config' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 1.2.31 Ensure that encryption providers are appropriately configured (Manual) - - -**Result:** warn - -**Remediation:** -Follow the Kubernetes documentation and configure a EncryptionConfig file. -In this file, choose aescbc, kms or secretbox as the encryption provider. - -**Audit:** - -```bash -grep aescbc /path/to/encryption-config.json -``` - -### 1.2.32 Ensure that the API Server only makes use of Strong Cryptographic Ciphers (Manual) - - -**Result:** pass - -**Remediation:** -Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml -on the control plane node and set the below parameter. ---tls-cipher-suites=TLS_AES_128_GCM_SHA256,TLS_AES_256_GCM_SHA384,TLS_CHACHA20_POLY1305_SHA256, -TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, -TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384, -TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256, -TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, -TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305, -TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256,TLS_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA, -TLS_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_GCM_SHA384 - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'tls-cipher-suites' -``` - -**Expected Result**: - -```console -'--tls-cipher-suites' contains valid elements from 'TLS_AES_128_GCM_SHA256,TLS_AES_256_GCM_SHA384,TLS_CHACHA20_POLY1305_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256,TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256,TLS_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_GCM_SHA384' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -## 1.3 Controller Manager -### 1.3.1 Ensure that the --terminated-pod-gc-threshold argument is set as appropriate (Manual) - - -**Result:** warn - -**Remediation:** -Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml -on the control plane node and set the --terminated-pod-gc-threshold to an appropriate threshold, -for example, --terminated-pod-gc-threshold=10 - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'terminated-pod-gc-threshold' -``` - -### 1.3.2 Ensure that the --profiling argument is set to false (Automated) - - -**Result:** pass - -**Remediation:** -Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml -on the control plane node and set the below parameter. ---profiling=false - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'profiling' -``` - -**Expected Result**: - -```console -'--profiling' is equal to 'false' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --use-service-account-credentials=true" -``` - -### 1.3.3 Ensure that the --use-service-account-credentials argument is set to true (Automated) - - -**Result:** pass - -**Remediation:** -Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml -on the control plane node to set the below parameter. ---use-service-account-credentials=true - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'use-service-account-credentials' -``` - -**Expected Result**: - -```console -'--use-service-account-credentials' is not equal to 'false' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --use-service-account-credentials=true" -``` - -### 1.3.4 Ensure that the --service-account-private-key-file argument is set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml -on the control plane node and set the --service-account-private-key-file parameter -to the private key file for service accounts. ---service-account-private-key-file= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'service-account-private-key-file' -``` - -**Expected Result**: - -```console -'--service-account-private-key-file' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --use-service-account-credentials=true" -``` - -### 1.3.5 Ensure that the --root-ca-file argument is set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml -on the control plane node and set the --root-ca-file parameter to the certificate bundle file`. ---root-ca-file= - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'root-ca-file' -``` - -**Expected Result**: - -```console -'--root-ca-file' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --use-service-account-credentials=true" -``` - -### 1.3.6 Ensure that the RotateKubeletServerCertificate argument is set to true (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml -on the control plane node and set the --feature-gates parameter to include RotateKubeletServerCertificate=true. ---feature-gates=RotateKubeletServerCertificate=true - -### 1.3.7 Ensure that the --bind-address argument is set to 127.0.0.1 (Automated) - - -**Result:** pass - -**Remediation:** -Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml -on the control plane node and ensure the correct value for the --bind-address parameter - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'bind-address' -``` - -**Expected Result**: - -```console -'--bind-address' is equal to '127.0.0.1' OR '--bind-address' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --use-service-account-credentials=true" -``` - -## 1.4 Scheduler -### 1.4.1 Ensure that the --profiling argument is set to false (Automated) - - -**Result:** pass - -**Remediation:** -Edit the Scheduler pod specification file /etc/kubernetes/manifests/kube-scheduler.yaml file -on the control plane node and set the below parameter. ---profiling=false - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-scheduler' | tail -n1 -``` - -**Expected Result**: - -```console -'--profiling' is equal to 'false' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-scheduler --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259" -``` - -### 1.4.2 Ensure that the --bind-address argument is set to 127.0.0.1 (Automated) - - -**Result:** pass - -**Remediation:** -Edit the Scheduler pod specification file /etc/kubernetes/manifests/kube-scheduler.yaml -on the control plane node and ensure the correct value for the --bind-address parameter - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-scheduler' | tail -n1 | grep 'bind-address' -``` - -**Expected Result**: - -```console -'--bind-address' is equal to '127.0.0.1' OR '--bind-address' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-scheduler --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259" -``` - -## 2 Etcd Node Configuration -### 2.1 Ensure that the --cert-file and --key-file arguments are set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Follow the etcd service documentation and configure TLS encryption. -Then, edit the etcd pod specification file /etc/kubernetes/manifests/etcd.yaml -on the master node and set the below parameters. ---cert-file= ---key-file= - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 2.1 -``` - -**Expected Result**: - -```console -'cert-file' is present AND 'key-file' is present -``` - -**Returned Value**: - -```console -cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key -``` - -### 2.2 Ensure that the --client-cert-auth argument is set to true (Automated) - - -**Result:** pass - -**Remediation:** -Edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master -node and set the below parameter. ---client-cert-auth="true" - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 2.2 -``` - -**Expected Result**: - -```console -'--client-cert-auth' is present OR 'client-cert-auth' is equal to 'true' -``` - -**Returned Value**: - -```console -client-cert-auth: true -``` - -### 2.3 Ensure that the --auto-tls argument is not set to true (Automated) - - -**Result:** pass - -**Remediation:** -Edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master -node and either remove the --auto-tls parameter or set it to false. ---auto-tls=false - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 2.3 -``` - -**Expected Result**: - -```console -'ETCD_AUTO_TLS' is not present OR 'ETCD_AUTO_TLS' is present -``` - -**Returned Value**: - -```console -error: process ID list syntax error Usage: ps [options] Try 'ps --help ' or 'ps --help ' for additional help text. For more details see ps(1). cat: /proc//environ: No such file or directory -``` - -### 2.4 Ensure that the --peer-cert-file and --peer-key-file arguments are set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -Follow the etcd service documentation and configure peer TLS encryption as appropriate -for your etcd cluster. -Then, edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the -master node and set the below parameters. ---peer-client-file= ---peer-key-file= - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 2.4 -``` - -**Expected Result**: - -```console -'cert-file' is present AND 'key-file' is present -``` - -**Returned Value**: - -```console -cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key -``` - -### 2.5 Ensure that the --peer-client-cert-auth argument is set to true (Automated) - - -**Result:** pass - -**Remediation:** -Edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master -node and set the below parameter. ---peer-client-cert-auth=true - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 2.5 -``` - -**Expected Result**: - -```console -'--client-cert-auth' is present OR 'client-cert-auth' is equal to 'true' -``` - -**Returned Value**: - -```console -client-cert-auth: true -``` - -### 2.6 Ensure that the --peer-auto-tls argument is not set to true (Automated) - - -**Result:** pass - -**Remediation:** -Edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master -node and either remove the --peer-auto-tls parameter or set it to false. ---peer-auto-tls=false - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 2.6 -``` - -**Expected Result**: - -```console -'ETCD_PEER_AUTO_TLS' is not present OR 'ETCD_PEER_AUTO_TLS' is present -``` - -**Returned Value**: - -```console -error: process ID list syntax error Usage: ps [options] Try 'ps --help ' or 'ps --help ' for additional help text. For more details see ps(1). cat: /proc//environ: No such file or directory -``` - -### 2.7 Ensure that a unique Certificate Authority is used for etcd (Manual) - - -**Result:** pass - -**Remediation:** -[Manual test] -Follow the etcd documentation and create a dedicated certificate authority setup for the -etcd service. -Then, edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the -master node and set the below parameter. ---trusted-ca-file= - -**Audit Script:** `check_for_k3s_etcd.sh` - -```bash -#!/bin/bash - -# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) -# before it checks the requirement -set -eE - -handle_error() { - echo "false" -} - -trap 'handle_error' ERR - - -if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then - case $1 in - "1.1.11") - echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; - "1.2.29") - echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; - "2.1") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.2") - echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.3") - echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.4") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; - "2.5") - echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; - "2.6") - echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; - "2.7") - echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; - esac -else -# If another database is running, return whatever is required to pass the scan - case $1 in - "1.1.11") - echo "700";; - "1.2.29") - echo "--etcd-certfile AND --etcd-keyfile";; - "2.1") - echo "cert-file AND key-file";; - "2.2") - echo "--client-cert-auth=true";; - "2.3") - echo "false";; - "2.4") - echo "peer-cert-file AND peer-key-file";; - "2.5") - echo "--client-cert-auth=true";; - "2.6") - echo "--peer-auto-tls=false";; - "2.7") - echo "--trusted-ca-file";; - esac -fi - -``` - -**Audit Execution:** - -```bash -./check_for_k3s_etcd.sh 2.7 -``` - -**Expected Result**: - -```console -'trusted-ca-file' is present -``` - -**Returned Value**: - -```console -trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt -``` - -## 3.1 Authentication and Authorization -### 3.1.1 Client certificate authentication should not be used for users (Manual) - - -**Result:** warn - -**Remediation:** -Alternative mechanisms provided by Kubernetes such as the use of OIDC should be -implemented in place of client certificates. - -## 3.2 Logging -### 3.2.1 Ensure that a minimal audit policy is created (Manual) - - -**Result:** warn - -**Remediation:** -Create an audit policy file for your cluster. - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'audit-policy-file' -``` - -### 3.2.2 Ensure that the audit policy covers key security concerns (Manual) - - -**Result:** warn - -**Remediation:** -Review the audit policy provided for the cluster and ensure that it covers -at least the following areas, -- Access to Secrets managed by the cluster. Care should be taken to only - log Metadata for requests to Secrets, ConfigMaps, and TokenReviews, in - order to avoid risk of logging sensitive data. -- Modification of Pod and Deployment objects. -- Use of `pods/exec`, `pods/portforward`, `pods/proxy` and `services/proxy`. - For most requests, minimally logging at the Metadata level is recommended - (the most basic level of logging). - -## 4.1 Worker Node Configuration Files -### 4.1.1 Ensure that the kubelet service file permissions are set to 644 or more restrictive (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the each worker node. -For example, chmod 644 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf - -### 4.1.2 Ensure that the kubelet service file ownership is set to root:root (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the below command (based on the file location on your system) on the each worker node. -For example, -chown root:root /etc/systemd/system/kubelet.service.d/10-kubeadm.conf - -### 4.1.3 If proxy kubeconfig file exists ensure permissions are set to 644 or more restrictive (Manual) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the each worker node. -For example, -chmod 644 /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig - -**Audit:** - -```bash -stat -c %a /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig -``` - -**Expected Result**: - -```console -'permissions' is present OR '/var/lib/rancher/k3s/agent/kubeproxy.kubeconfig' is not present -``` - -**Returned Value**: - -```console -644 -``` - -### 4.1.4 If proxy kubeconfig file exists ensure ownership is set to root:root (Manual) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the each worker node. -For example, chown root:root /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig - -**Audit:** - -```bash -stat -c %U:%G /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig -``` - -**Expected Result**: - -```console -'root:root' is present OR '/var/lib/rancher/k3s/agent/kubeproxy.kubeconfig' is not present -``` - -**Returned Value**: - -```console -root:root -``` - -### 4.1.5 Ensure that the --kubeconfig kubelet.conf file permissions are set to 644 or more restrictive (Automated) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the each worker node. -For example, -chmod 644 /var/lib/rancher/k3s/server/cred/admin.kubeconfig - -**Audit:** - -```bash -stat -c %a /var/lib/rancher/k3s/agent/kubelet.kubeconfig -``` - -**Expected Result**: - -```console -'644' is equal to '644' -``` - -**Returned Value**: - -```console -644 -``` - -### 4.1.6 Ensure that the --kubeconfig kubelet.conf file ownership is set to root:root (Automated) - - -**Result:** pass - -**Remediation:** -Run the below command (based on the file location on your system) on the each worker node. -For example, -chown root:root /var/lib/rancher/k3s/server/cred/admin.kubeconfig - -**Audit:** - -```bash -stat -c %U:%G /var/lib/rancher/k3s/agent/kubelet.kubeconfig -``` - -**Expected Result**: - -```console -'root:root' is equal to 'root:root' -``` - -**Returned Value**: - -```console -root:root -``` - -### 4.1.7 Ensure that the certificate authorities file permissions are set to 644 or more restrictive (Manual) - - -**Result:** pass - -**Remediation:** -Run the following command to modify the file permissions of the ---client-ca-file chmod 644 - -**Audit:** - -```bash -stat -c %a /var/lib/rancher/k3s/server/tls/server-ca.crt -``` - -**Expected Result**: - -```console -'644' is equal to '644' OR '640' is present OR '600' is present OR '444' is present OR '440' is present OR '400' is present OR '000' is present -``` - -**Returned Value**: - -```console -644 -``` - -### 4.1.8 Ensure that the client certificate authorities file ownership is set to root:root (Manual) - - -**Result:** pass - -**Remediation:** -Run the following command to modify the ownership of the --client-ca-file. -chown root:root - -**Audit:** - -```bash -stat -c %U:%G /var/lib/rancher/k3s/server/tls/client-ca.crt -``` - -**Expected Result**: - -```console -'root:root' is equal to 'root:root' -``` - -**Returned Value**: - -```console -root:root -``` - -### 4.1.9 Ensure that the kubelet --config configuration file has permissions set to 644 or more restrictive (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the following command (using the config file location identified in the Audit step) -chmod 644 /var/lib/kubelet/config.yaml - -### 4.1.10 Ensure that the kubelet --config configuration file ownership is set to root:root (Automated) - - -**Result:** Not Applicable - -**Remediation:** -Run the following command (using the config file location identified in the Audit step) -chown root:root /var/lib/kubelet/config.yaml - -## 4.2 Kubelet -### 4.2.1 Ensure that the --anonymous-auth argument is set to false (Automated) - - -**Result:** pass - -**Remediation:** -If using a Kubelet config file, edit the file to set `authentication: anonymous: enabled` to -`false`. -If using executable arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. -`--anonymous-auth=false` -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "anonymous-auth" | grep -v grep; else echo "--anonymous-auth=false"; fi' -``` - -**Expected Result**: - -```console -'--anonymous-auth' is equal to 'false' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 4.2.2 Ensure that the --authorization-mode argument is not set to AlwaysAllow (Automated) - - -**Result:** pass - -**Remediation:** -If using a Kubelet config file, edit the file to set `authorization.mode` to Webhook. If -using executable arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the below parameter in KUBELET_AUTHZ_ARGS variable. ---authorization-mode=Webhook -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "authorization-mode" | grep -v grep; else echo "--authorization-mode=Webhook"; fi' -``` - -**Expected Result**: - -```console -'--authorization-mode' does not have 'AlwaysAllow' -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 4.2.3 Ensure that the --client-ca-file argument is set as appropriate (Automated) - - -**Result:** pass - -**Remediation:** -If using a Kubelet config file, edit the file to set `authentication.x509.clientCAFile` to -the location of the client CA file. -If using command line arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the below parameter in KUBELET_AUTHZ_ARGS variable. ---client-ca-file= -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "client-ca-file" | grep -v grep; else echo "--client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt"; fi' -``` - -**Expected Result**: - -```console -'--client-ca-file' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:42 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:42Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" -``` - -### 4.2.4 Ensure that the --read-only-port argument is set to 0 (Manual) - - -**Result:** pass - -**Remediation:** -If using a Kubelet config file, edit the file to set `readOnlyPort` to 0. -If using command line arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. ---read-only-port=0 -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kubelet' | tail -n1 | grep 'read-only-port' -``` - -**Expected Result**: - -```console -'--read-only-port' is equal to '0' OR '--read-only-port' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:44 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:44Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=ip-172-31-31-124 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-labels=cattle.io/os=linux,rke.cattle.io/machine=5c42d922-ed1e-4e15-8414-d399d179d897 --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key" -``` - -### 4.2.5 Ensure that the --streaming-connection-idle-timeout argument is not set to 0 (Manual) - - -**Result:** warn - -**Remediation:** -If using a Kubelet config file, edit the file to set `streamingConnectionIdleTimeout` to a -value other than 0. -If using command line arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. ---streaming-connection-idle-timeout=5m -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kubelet' | tail -n1 | grep 'streaming-connection-idle-timeout' -``` - -### 4.2.6 Ensure that the --protect-kernel-defaults argument is set to true (Automated) - - -**Result:** pass - -**Remediation:** -If using a Kubelet config file, edit the file to set `protectKernelDefaults` to `true`. -If using command line arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. ---protect-kernel-defaults=true -Based on your system, restart the kubelet service. For example: -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kubelet' | tail -n1 | grep 'protect-kernel-defaults' -``` - -**Expected Result**: - -```console -'--protect-kernel-defaults' is equal to 'true' -``` - -**Returned Value**: - -```console -Feb 27 23:21:44 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:44Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=ip-172-31-31-124 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-labels=cattle.io/os=linux,rke.cattle.io/machine=5c42d922-ed1e-4e15-8414-d399d179d897 --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key" -``` - -### 4.2.7 Ensure that the --make-iptables-util-chains argument is set to true (Automated) - - -**Result:** pass - -**Remediation:** -If using a Kubelet config file, edit the file to set `makeIPTablesUtilChains` to `true`. -If using command line arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -remove the --make-iptables-util-chains argument from the -KUBELET_SYSTEM_PODS_ARGS variable. -Based on your system, restart the kubelet service. For example: -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kubelet' | tail -n1 | grep 'make-iptables-util-chains' -``` - -**Expected Result**: - -```console -'--make-iptables-util-chains' is equal to 'true' OR '--make-iptables-util-chains' is not present -``` - -**Returned Value**: - -```console -Feb 27 23:21:44 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:44Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=ip-172-31-31-124 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-labels=cattle.io/os=linux,rke.cattle.io/machine=5c42d922-ed1e-4e15-8414-d399d179d897 --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key" -``` - -### 4.2.8 Ensure that the --hostname-override argument is not set (Manual) - - -**Result:** Not Applicable - -**Remediation:** -Edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf -on each worker node and remove the --hostname-override argument from the -KUBELET_SYSTEM_PODS_ARGS variable. -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -### 4.2.9 Ensure that the --event-qps argument is set to 0 or a level which ensures appropriate event capture (Manual) - - -**Result:** warn - -**Remediation:** -If using a Kubelet config file, edit the file to set `eventRecordQPS` to an appropriate level. -If using command line arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -/bin/ps -fC containerd -``` - -### 4.2.10 Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Manual) - - -**Result:** pass - -**Remediation:** -If using a Kubelet config file, edit the file to set `tlsCertFile` to the location -of the certificate file to use to identify this Kubelet, and `tlsPrivateKeyFile` -to the location of the corresponding private key file. -If using command line arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the below parameters in KUBELET_CERTIFICATE_ARGS variable. ---tls-cert-file= ---tls-private-key-file= -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -journalctl -D /var/log/journal -u k3s | grep 'Running kubelet' | tail -n1 -``` - -**Expected Result**: - -```console -'--tls-cert-file' is present AND '--tls-private-key-file' is present -``` - -**Returned Value**: - -```console -Feb 27 23:21:44 ip-172-31-31-124 k3s[13723]: time="2023-02-27T23:21:44Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=ip-172-31-31-124 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-labels=cattle.io/os=linux,rke.cattle.io/machine=5c42d922-ed1e-4e15-8414-d399d179d897 --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key" -``` - -### 4.2.11 Ensure that the --rotate-certificates argument is not set to false (Manual) - - -**Result:** pass - -**Remediation:** -If using a Kubelet config file, edit the file to add the line `rotateCertificates` to `true` or -remove it altogether to use the default value. -If using command line arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -remove --rotate-certificates=false argument from the KUBELET_CERTIFICATE_ARGS -variable. -Based on your system, restart the kubelet service. For example, -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -/bin/ps -fC containerd -``` - -**Audit Config:** - -```bash -/bin/sh -c 'if test -e /var/lib/kubelet/config.yaml; then /bin/cat /var/lib/kubelet/config.yaml; fi' -``` - -**Expected Result**: - -```console -'{.rotateCertificates}' is present OR '{.rotateCertificates}' is not present -``` - -### 4.2.12 Verify that the RotateKubeletServerCertificate argument is set to true (Manual) - - -**Result:** Not Applicable - -**Remediation:** -Edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf -on each worker node and set the below parameter in KUBELET_CERTIFICATE_ARGS variable. ---feature-gates=RotateKubeletServerCertificate=true -Based on your system, restart the kubelet service. For example: -systemctl daemon-reload -systemctl restart kubelet.service - -### 4.2.13 Ensure that the Kubelet only makes use of Strong Cryptographic Ciphers (Manual) - - -**Result:** warn - -**Remediation:** -If using a Kubelet config file, edit the file to set `TLSCipherSuites` to -TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_128_GCM_SHA256 -or to a subset of these values. -If using executable arguments, edit the kubelet service file -/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and -set the --tls-cipher-suites parameter as follows, or to a subset of these values. ---tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_128_GCM_SHA256 -Based on your system, restart the kubelet service. For example: -systemctl daemon-reload -systemctl restart kubelet.service - -**Audit:** - -```bash -/bin/ps -fC containerd -``` - -## 5.1 RBAC and Service Accounts -### 5.1.1 Ensure that the cluster-admin role is only used where required (Manual) - - -**Result:** warn - -**Remediation:** -Identify all clusterrolebindings to the cluster-admin role. Check if they are used and -if they need this role or if they could use a role with fewer privileges. -Where possible, first bind users to a lower privileged role and then remove the -clusterrolebinding to the cluster-admin role : -kubectl delete clusterrolebinding [name] - -### 5.1.2 Minimize access to secrets (Manual) - - -**Result:** warn - -**Remediation:** -Where possible, remove get, list and watch access to Secret objects in the cluster. - -### 5.1.3 Minimize wildcard use in Roles and ClusterRoles (Manual) - - -**Result:** warn - -**Remediation:** -Where possible replace any use of wildcards in clusterroles and roles with specific -objects or actions. - -### 5.1.4 Minimize access to create pods (Manual) - - -**Result:** warn - -**Remediation:** -Where possible, remove create access to pod objects in the cluster. - -### 5.1.5 Ensure that default service accounts are not actively used. (Manual) - - -**Result:** warn - -**Remediation:** -Create explicit service accounts wherever a Kubernetes workload requires specific access -to the Kubernetes API server. -Modify the configuration of each default service account to include this value -automountServiceAccountToken: false - -### 5.1.6 Ensure that Service Account Tokens are only mounted where necessary (Manual) - - -**Result:** warn - -**Remediation:** -Modify the definition of pods and service accounts which do not need to mount service -account tokens to disable it. - -### 5.1.7 Avoid use of system:masters group (Manual) - - -**Result:** warn - -**Remediation:** -Remove the system:masters group from all users in the cluster. - -### 5.1.8 Limit use of the Bind, Impersonate and Escalate permissions in the Kubernetes cluster (Manual) - - -**Result:** warn - -**Remediation:** -Where possible, remove the impersonate, bind and escalate rights from subjects. - -## 5.2 Pod Security Standards -### 5.2.1 Ensure that the cluster has at least one active policy control mechanism in place (Manual) - - -**Result:** warn - -**Remediation:** -Ensure that either Pod Security Admission or an external policy control system is in place -for every namespace which contains user workloads. - -### 5.2.2 Minimize the admission of privileged containers (Manual) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of privileged containers. - -### 5.2.3 Minimize the admission of containers wishing to share the host process ID namespace (Automated) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of `hostPID` containers. - -### 5.2.4 Minimize the admission of containers wishing to share the host IPC namespace (Automated) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of `hostIPC` containers. - -### 5.2.5 Minimize the admission of containers wishing to share the host network namespace (Automated) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of `hostNetwork` containers. - -### 5.2.6 Minimize the admission of containers with allowPrivilegeEscalation (Automated) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of containers with `.spec.allowPrivilegeEscalation` set to `true`. - -### 5.2.7 Minimize the admission of root containers (Automated) - - -**Result:** warn - -**Remediation:** -Create a policy for each namespace in the cluster, ensuring that either `MustRunAsNonRoot` -or `MustRunAs` with the range of UIDs not including 0, is set. - -### 5.2.8 Minimize the admission of containers with the NET_RAW capability (Automated) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of containers with the `NET_RAW` capability. - -### 5.2.9 Minimize the admission of containers with added capabilities (Automated) - - -**Result:** warn - -**Remediation:** -Ensure that `allowedCapabilities` is not present in policies for the cluster unless -it is set to an empty array. - -### 5.2.10 Minimize the admission of containers with capabilities assigned (Manual) - - -**Result:** warn - -**Remediation:** -Review the use of capabilites in applications running on your cluster. Where a namespace -contains applicaions which do not require any Linux capabities to operate consider adding -a PSP which forbids the admission of containers which do not drop all capabilities. - -### 5.2.11 Minimize the admission of Windows HostProcess containers (Manual) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of containers that have `.securityContext.windowsOptions.hostProcess` set to `true`. - -### 5.2.12 Minimize the admission of HostPath volumes (Manual) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of containers with `hostPath` volumes. - -### 5.2.13 Minimize the admission of containers which use HostPorts (Manual) - - -**Result:** warn - -**Remediation:** -Add policies to each namespace in the cluster which has user workloads to restrict the -admission of containers which use `hostPort` sections. - -## 5.3 Network Policies and CNI -### 5.3.1 Ensure that the CNI in use supports NetworkPolicies (Manual) - - -**Result:** warn - -**Remediation:** -If the CNI plugin in use does not support network policies, consideration should be given to -making use of a different plugin, or finding an alternate mechanism for restricting traffic -in the Kubernetes cluster. - -### 5.3.2 Ensure that all Namespaces have NetworkPolicies defined (Manual) - - -**Result:** warn - -**Remediation:** -Follow the documentation and create NetworkPolicy objects as you need them. - -## 5.4 Secrets Management -### 5.4.1 Prefer using Secrets as files over Secrets as environment variables (Manual) - - -**Result:** warn - -**Remediation:** -If possible, rewrite application code to read Secrets from mounted secret files, rather than -from environment variables. - -### 5.4.2 Consider external secret storage (Manual) - - -**Result:** warn - -**Remediation:** -Refer to the Secrets management options offered by your cloud provider or a third-party -secrets management solution. - -## 5.5 Extensible Admission Control -### 5.5.1 Configure Image Provenance using ImagePolicyWebhook admission controller (Manual) - - -**Result:** warn - -**Remediation:** -Follow the Kubernetes documentation and setup image provenance. - -## 5.7 General Policies -### 5.7.1 Create administrative boundaries between resources using namespaces (Manual) - - -**Result:** warn - -**Remediation:** -Follow the documentation and create namespaces for objects in your deployment as you need -them. - -### 5.7.2 Ensure that the seccomp profile is set to docker/default in your Pod definitions (Manual) - - -**Result:** warn - -**Remediation:** -Use `securityContext` to enable the docker/default seccomp profile in your pod definitions. -An example is as below: -securityContext: -seccompProfile: -type: RuntimeDefault - -### 5.7.3 Apply SecurityContext to your Pods and Containers (Manual) - - -**Result:** warn - -**Remediation:** -Follow the Kubernetes documentation and apply SecurityContexts to your Pods. For a -suggested list of SecurityContexts, you may refer to the CIS Security Benchmark for Docker -Containers. - -### 5.7.4 The default namespace should not be used (Manual) - - -**Result:** warn - -**Remediation:** -Ensure that namespaces are created to allow for appropriate segregation of Kubernetes -resources and that all new resources are created in a specific namespace. +--- +title: K3s Self-Assessment Guide - CIS Benchmark v1.7 - K8s v1.25 +--- + +This document is a companion to the [K3s Hardening Guide](../../../../pages-for-subheaders/k3s-hardening-guide.md), which provides prescriptive guidance on how to harden K3s clusters that are running in production and managed by Rancher. This benchmark guide helps you evaluate the security of a hardened cluster against each control in the CIS Kubernetes Benchmark. + +This guide corresponds to the following versions of Rancher, CIS Benchmarks, and Kubernetes: + +| Rancher Version | CIS Benchmark Version | Kubernetes Version | +|-----------------|-----------------------|--------------------| +| Rancher v2.7 | Benchmark v1.7 | Kubernetes v1.25 | + +This document is for Rancher operators, security teams, auditors and decision makers. + +For more information about each control, including detailed descriptions and remediations for failing tests, refer to the corresponding section of the CIS Kubernetes Benchmark v1.7. You can download the benchmark, after creating a free account, at [Center for Internet Security (CIS)](https://www.cisecurity.org/benchmark/kubernetes/). + +## Testing Methodology + +Each control in the CIS Kubernetes Benchmark was evaluated against a K3s cluster that was configured according to the accompanying hardening guide. + +Where control audits differ from the original CIS benchmark, the audit commands specific to K3s are provided for testing. + +These are the possible results for each control: + +- **Pass** - The K3s cluster passes the audit outlined in the benchmark. +- **Not Applicable** - The control is not applicable to K3s because of how it is designed to operate. The remediation section explains why. +- **Warn** - The control is manual in the CIS benchmark and it depends on the cluster's use-case or some other factor that must be determined by the cluster operator. These controls have been evaluated to ensure K3s doesn't prevent their implementation, but no further configuration or auditing of the cluster has been performed. + +This guide makes the assumption that K3s is running as a Systemd unit. Your installation may vary. Adjust the "audit" commands to fit your scenario. + +:::note + +This guide only covers `automated` (previously called `scored`) tests. + +::: + +### Controls + + +## 1.1 Control Plane Node Configuration Files +### 1.1.1 Ensure that the API server pod specification file permissions are set to 600 or more restrictive (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the +control plane node. +For example, chmod 600 /etc/kubernetes/manifests/kube-apiserver.yaml +Not Applicable. + +### 1.1.2 Ensure that the API server pod specification file ownership is set to root:root (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, chown root:root /etc/kubernetes/manifests/kube-apiserver.yaml +Not Applicable. + +### 1.1.3 Ensure that the controller manager pod specification file permissions are set to 600 or more restrictive (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, chmod 600 /etc/kubernetes/manifests/kube-controller-manager.yaml +Not Applicable. + +### 1.1.4 Ensure that the controller manager pod specification file ownership is set to root:root (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, chown root:root /etc/kubernetes/manifests/kube-controller-manager.yaml +Not Applicable. + +### 1.1.5 Ensure that the scheduler pod specification file permissions are set to 600 or more restrictive (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, chmod 600 /etc/kubernetes/manifests/kube-scheduler.yaml +Not Applicable. + +### 1.1.6 Ensure that the scheduler pod specification file ownership is set to root:root (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, chown root:root /etc/kubernetes/manifests/kube-scheduler.yaml +Not Applicable. + +### 1.1.7 Ensure that the etcd pod specification file permissions are set to 600 or more restrictive (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chmod 600 /etc/kubernetes/manifests/etcd.yaml +Not Applicable. + +### 1.1.8 Ensure that the etcd pod specification file ownership is set to root:root (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chown root:root /etc/kubernetes/manifests/etcd.yaml +Not Applicable. + +### 1.1.9 Ensure that the Container Network Interface file permissions are set to 600 or more restrictive (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, chmod 600 \ +Not Applicable. + +### 1.1.10 Ensure that the Container Network Interface file ownership is set to root:root (Manual) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chown root:root \ +Not Applicable. + +### 1.1.11 Ensure that the etcd data directory permissions are set to 700 or more restrictive (Automated) + + +**Result:** pass + +**Remediation:** +On the etcd server node, get the etcd data directory, passed as an argument --data-dir, +from the command 'ps -ef | grep etcd'. +Run the below command (based on the etcd data directory found above). For example, +chmod 700 /var/lib/etcd + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 1.1.11 +``` + +**Expected Result**: + +```console +'700' is equal to '700' +``` + +**Returned Value**: + +```console +700 +``` + +### 1.1.12 Ensure that the etcd data directory ownership is set to etcd:etcd (Automated) + + +**Result:** Not Applicable + +**Remediation:** +On the etcd server node, get the etcd data directory, passed as an argument --data-dir, +from the command 'ps -ef | grep etcd'. +Run the below command (based on the etcd data directory found above). +For example, chown etcd:etcd /var/lib/etcd +Not Applicable. + +### 1.1.13 Ensure that the admin.conf file permissions are set to 600 or more restrictive (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, chmod 600 /var/lib/rancher/k3s/server/cred/admin.kubeconfig + +### 1.1.14 Ensure that the admin.conf file ownership is set to root:root (Automated) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, chown root:root /etc/kubernetes/admin.conf + +**Audit:** + +```bash +/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/admin.kubeconfig; then stat -c %U:%G /var/lib/rancher/k3s/server/cred/admin.kubeconfig; fi' +``` + +**Expected Result**: + +```console +'root:root' is equal to 'root:root' +``` + +**Returned Value**: + +```console +root:root +``` + +### 1.1.15 Ensure that the scheduler.conf file permissions are set to 600 or more restrictive (Automated) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chmod 600 scheduler + +**Audit:** + +```bash +/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; fi' +``` + +**Expected Result**: + +```console +permissions has permissions 600, expected 600 or more restrictive +``` + +**Returned Value**: + +```console +permissions=600 +``` + +### 1.1.16 Ensure that the scheduler.conf file ownership is set to root:root (Automated) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chown root:root scheduler + +**Audit:** + +```bash +/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; then stat -c %U:%G /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; fi' +``` + +**Expected Result**: + +```console +'root:root' is present +``` + +**Returned Value**: + +```console +root:root +``` + +### 1.1.17 Ensure that the controller-manager.conf file permissions are set to 600 or more restrictive (Automated) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chmod 600 controllermanager + +**Audit:** + +```bash +/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/controller.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/server/cred/controller.kubeconfig; fi' +``` + +**Expected Result**: + +```console +permissions has permissions 600, expected 600 or more restrictive +``` + +**Returned Value**: + +```console +permissions=600 +``` + +### 1.1.18 Ensure that the controller-manager.conf file ownership is set to root:root (Automated) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chown root:root controllermanager + +**Audit:** + +```bash +stat -c %U:%G /var/lib/rancher/k3s/server/cred/controller.kubeconfig +``` + +**Expected Result**: + +```console +'root:root' is equal to 'root:root' +``` + +**Returned Value**: + +```console +root:root +``` + +### 1.1.19 Ensure that the Kubernetes PKI directory and file ownership is set to root:root (Automated) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chown -R root:root /var/lib/rancher/k3s/server/tls + +**Audit:** + +```bash +stat -c %U:%G /var/lib/rancher/k3s/server/tls +``` + +**Expected Result**: + +```console +'root:root' is present +``` + +**Returned Value**: + +```console +root:root +``` + +### 1.1.20 Ensure that the Kubernetes PKI certificate file permissions are set to 600 or more restrictive (Manual) + + +**Result:** warn + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chmod -R 600 /etc/kubernetes/pki/*.crt + +**Audit:** + +```bash +stat -c %n %a /var/lib/rancher/k3s/server/tls/*.crt +``` + +### 1.1.21 Ensure that the Kubernetes PKI key file permissions are set to 600 (Manual) + + +**Result:** warn + +**Remediation:** +Run the below command (based on the file location on your system) on the control plane node. +For example, +chmod -R 600 /etc/kubernetes/pki/*.key + +**Audit:** + +```bash +stat -c %n %a /var/lib/rancher/k3s/server/tls/*.key +``` + +## 1.2 API Server +### 1.2.1 Ensure that the --anonymous-auth argument is set to false (Manual) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the below parameter. +--anonymous-auth=false + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'anonymous-auth' +``` + +**Expected Result**: + +```console +'--anonymous-auth' is equal to 'false' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.2 Ensure that the --token-auth-file parameter is not set (Automated) + + +**Result:** pass + +**Remediation:** +Follow the documentation and configure alternate mechanisms for authentication. Then, +edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and remove the --token-auth-file=\ parameter. + +**Audit:** + +```bash +/bin/ps -ef | grep containerd | grep -v grep +``` + +**Expected Result**: + +```console +'--token-auth-file' is not present +``` + +**Returned Value**: + +```console +root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 663 1 0 Sep11 ? 00:00:08 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd root 3021 1 0 Sep11 ? 00:00:29 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 4790d392966915d995e666002c56ed4cce6dd86f305ce2ee390547a1fcbf6c82 -address /run/k3s/containerd/containerd.sock root 3035 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 9d73e6a160ccde6c7c7d4ba0df3b9f696e3de2ebfc0f19a1dcbdf13aea496427 -address /run/k3s/containerd/containerd.sock root 3235 1 0 Sep11 ? 00:00:31 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 587f6221ee9f36c877231ada8d816a799dfda186332c33378d1eb16c72cdc87d -address /run/k3s/containerd/containerd.sock root 4435 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id a74c9ec7d99785c2f2d4e6826aa80c22eb8b38249e8f99679ece00a818e9b7b3 -address /run/k3s/containerd/containerd.sock root 4985 1 0 Sep11 ? 00:00:53 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5b0c9784dbe0fcbe8be10c857976e70ec84a208cb814e87b5ca085a02d434f8c -address /run/k3s/containerd/containerd.sock root 5056 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id f3231ff35f18056e74eda14907f296be15f7ea1c6ae5ab7904e27d4d18183301 -address /run/k3s/containerd/containerd.sock root 5868 1 0 Sep11 ? 00:00:27 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 3e908c4d0b10df275bdef6f72fbcfa09517d11cf749236ad020364e14d77bc93 -address /run/k3s/containerd/containerd.sock root 6158 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id bec5780a5c73fa3154aa3b5ee26cdf23202db821205893e7e66ae17e6103e97b -address /run/k3s/containerd/containerd.sock root 7366 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id a81b78845bdcaef710314c93e5ea0d0617f37a8929472f7b570ab90c6667f57f -address /run/k3s/containerd/containerd.sock root 97274 1 0 16:13 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id c90652c935d9e79af45b9a9ac2b4fe315e2a761a0525737fdb95c680123a164c -address /run/k3s/containerd/containerd.sock root 98309 1 0 16:16 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 431a2763636488efd7d104c228d41f4f2ecd8c06a7fc375d8977ab0d238936a8 -address /run/k3s/containerd/containerd.sock root 98493 1 0 16:16 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5b480d2fa55c8cc0105ec1902887040c017f03d5b1eb6c73c24bb9d523ad9b37 -address /run/k3s/containerd/containerd.sock +``` + +### 1.2.3 Ensure that the --DenyServiceExternalIPs is not set (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and remove the `DenyServiceExternalIPs` +from enabled admission plugins. + +**Audit:** + +```bash +/bin/ps -ef | grep containerd | grep -v grep +``` + +**Expected Result**: + +```console +'--enable-admission-plugins' is present OR '--enable-admission-plugins' is not present +``` + +**Returned Value**: + +```console +root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 663 1 0 Sep11 ? 00:00:08 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd root 3021 1 0 Sep11 ? 00:00:29 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 4790d392966915d995e666002c56ed4cce6dd86f305ce2ee390547a1fcbf6c82 -address /run/k3s/containerd/containerd.sock root 3035 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 9d73e6a160ccde6c7c7d4ba0df3b9f696e3de2ebfc0f19a1dcbdf13aea496427 -address /run/k3s/containerd/containerd.sock root 3235 1 0 Sep11 ? 00:00:31 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 587f6221ee9f36c877231ada8d816a799dfda186332c33378d1eb16c72cdc87d -address /run/k3s/containerd/containerd.sock root 4435 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id a74c9ec7d99785c2f2d4e6826aa80c22eb8b38249e8f99679ece00a818e9b7b3 -address /run/k3s/containerd/containerd.sock root 4985 1 0 Sep11 ? 00:00:53 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5b0c9784dbe0fcbe8be10c857976e70ec84a208cb814e87b5ca085a02d434f8c -address /run/k3s/containerd/containerd.sock root 5056 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id f3231ff35f18056e74eda14907f296be15f7ea1c6ae5ab7904e27d4d18183301 -address /run/k3s/containerd/containerd.sock root 5868 1 0 Sep11 ? 00:00:27 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 3e908c4d0b10df275bdef6f72fbcfa09517d11cf749236ad020364e14d77bc93 -address /run/k3s/containerd/containerd.sock root 6158 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id bec5780a5c73fa3154aa3b5ee26cdf23202db821205893e7e66ae17e6103e97b -address /run/k3s/containerd/containerd.sock root 7366 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id a81b78845bdcaef710314c93e5ea0d0617f37a8929472f7b570ab90c6667f57f -address /run/k3s/containerd/containerd.sock root 97274 1 0 16:13 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id c90652c935d9e79af45b9a9ac2b4fe315e2a761a0525737fdb95c680123a164c -address /run/k3s/containerd/containerd.sock root 98309 1 0 16:16 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 431a2763636488efd7d104c228d41f4f2ecd8c06a7fc375d8977ab0d238936a8 -address /run/k3s/containerd/containerd.sock root 98493 1 0 16:16 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5b480d2fa55c8cc0105ec1902887040c017f03d5b1eb6c73c24bb9d523ad9b37 -address /run/k3s/containerd/containerd.sock +``` + +### 1.2.4 Ensure that the --kubelet-client-certificate and --kubelet-client-key arguments are set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Follow the Kubernetes documentation and set up the TLS connection between the +apiserver and kubelets. Then, edit API server pod specification file +/etc/kubernetes/manifests/kube-apiserver.yaml on the control plane node and set the +kubelet client certificate and key parameters as below. +--kubelet-client-certificate=\ +--kubelet-client-key=\ + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'kubelet-certificate-authority' +``` + +**Expected Result**: + +```console +'--kubelet-client-certificate' is present AND '--kubelet-client-key' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.5 Ensure that the --kubelet-certificate-authority argument is set as appropriate (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Follow the Kubernetes documentation and setup the TLS connection between +the apiserver and kubelets. Then, edit the API server pod specification file +/etc/kubernetes/manifests/kube-apiserver.yaml on the control plane node and set the +--kubelet-certificate-authority parameter to the path to the cert file for the certificate authority. +--kubelet-certificate-authority=\ +Permissive - When generating serving certificates, functionality could break in conjunction with hostname overrides which are required for certain cloud providers. + +### 1.2.6 Ensure that the --authorization-mode argument is not set to AlwaysAllow (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --authorization-mode parameter to values other than AlwaysAllow. +One such example could be as below. +--authorization-mode=RBAC + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode' +``` + +**Expected Result**: + +```console +'--authorization-mode' does not have 'AlwaysAllow' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.7 Ensure that the --authorization-mode argument includes Node (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --authorization-mode parameter to a value that includes Node. +--authorization-mode=Node,RBAC + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode' +``` + +**Expected Result**: + +```console +'--authorization-mode' has 'Node' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.8 Ensure that the --authorization-mode argument includes RBAC (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --authorization-mode parameter to a value that includes RBAC, +for example `--authorization-mode=Node,RBAC`. + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode' +``` + +**Expected Result**: + +```console +'--authorization-mode' has 'RBAC' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.9 Ensure that the admission control plugin EventRateLimit is set (Manual) + + +**Result:** warn + +**Remediation:** +Follow the Kubernetes documentation and set the desired limits in a configuration file. +Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +and set the below parameters. +--enable-admission-plugins=...,EventRateLimit,... +--admission-control-config-file=\ + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins' +``` + +**Expected Result**: + +```console +'--enable-admission-plugins' has 'EventRateLimit' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.10 Ensure that the admission control plugin AlwaysAdmit is not set (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and either remove the --enable-admission-plugins parameter, or set it to a +value that does not include AlwaysAdmit. + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins' +``` + +**Expected Result**: + +```console +'--enable-admission-plugins' does not have 'AlwaysAdmit' OR '--enable-admission-plugins' is not present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.11 Ensure that the admission control plugin AlwaysPullImages is set (Manual) + + +**Result:** warn + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --enable-admission-plugins parameter to include +AlwaysPullImages. +--enable-admission-plugins=...,AlwaysPullImages,... + +**Audit:** + +```bash +/bin/ps -ef | grep containerd | grep -v grep +``` + +**Expected Result**: + +```console +'--enable-admission-plugins' is present +``` + +**Returned Value**: + +```console +root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 663 1 0 Sep11 ? 00:00:08 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd root 3021 1 0 Sep11 ? 00:00:29 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 4790d392966915d995e666002c56ed4cce6dd86f305ce2ee390547a1fcbf6c82 -address /run/k3s/containerd/containerd.sock root 3035 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 9d73e6a160ccde6c7c7d4ba0df3b9f696e3de2ebfc0f19a1dcbdf13aea496427 -address /run/k3s/containerd/containerd.sock root 3235 1 0 Sep11 ? 00:00:31 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 587f6221ee9f36c877231ada8d816a799dfda186332c33378d1eb16c72cdc87d -address /run/k3s/containerd/containerd.sock root 4435 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id a74c9ec7d99785c2f2d4e6826aa80c22eb8b38249e8f99679ece00a818e9b7b3 -address /run/k3s/containerd/containerd.sock root 4985 1 0 Sep11 ? 00:00:53 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5b0c9784dbe0fcbe8be10c857976e70ec84a208cb814e87b5ca085a02d434f8c -address /run/k3s/containerd/containerd.sock root 5056 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id f3231ff35f18056e74eda14907f296be15f7ea1c6ae5ab7904e27d4d18183301 -address /run/k3s/containerd/containerd.sock root 5868 1 0 Sep11 ? 00:00:27 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 3e908c4d0b10df275bdef6f72fbcfa09517d11cf749236ad020364e14d77bc93 -address /run/k3s/containerd/containerd.sock root 6158 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id bec5780a5c73fa3154aa3b5ee26cdf23202db821205893e7e66ae17e6103e97b -address /run/k3s/containerd/containerd.sock root 7366 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id a81b78845bdcaef710314c93e5ea0d0617f37a8929472f7b570ab90c6667f57f -address /run/k3s/containerd/containerd.sock root 97274 1 0 16:13 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id c90652c935d9e79af45b9a9ac2b4fe315e2a761a0525737fdb95c680123a164c -address /run/k3s/containerd/containerd.sock root 98309 1 0 16:16 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 431a2763636488efd7d104c228d41f4f2ecd8c06a7fc375d8977ab0d238936a8 -address /run/k3s/containerd/containerd.sock root 98493 1 0 16:16 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5b480d2fa55c8cc0105ec1902887040c017f03d5b1eb6c73c24bb9d523ad9b37 -address /run/k3s/containerd/containerd.sock +``` + +### 1.2.12 Ensure that the admission control plugin SecurityContextDeny is set if PodSecurityPolicy is not used (Manual) + + +**Result:** Not Applicable + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --enable-admission-plugins parameter to include +SecurityContextDeny, unless PodSecurityPolicy is already in place. +--enable-admission-plugins=...,SecurityContextDeny,... +Permissive - Enabling Pod Security Policy can cause applications to unexpectedly fail. + +### 1.2.13 Ensure that the admission control plugin ServiceAccount is set (Automated) + + +**Result:** pass + +**Remediation:** +Follow the documentation and create ServiceAccount objects as per your environment. +Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and ensure that the --disable-admission-plugins parameter is set to a +value that does not include ServiceAccount. + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep -v grep +``` + +**Expected Result**: + +```console +'--disable-admission-plugins' is present OR '--disable-admission-plugins' is not present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.14 Ensure that the admission control plugin NamespaceLifecycle is set (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --disable-admission-plugins parameter to +ensure it does not include NamespaceLifecycle. + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep -v grep +``` + +**Expected Result**: + +```console +'--disable-admission-plugins' is present OR '--disable-admission-plugins' is not present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.15 Ensure that the admission control plugin NodeRestriction is set (Automated) + + +**Result:** pass + +**Remediation:** +Follow the Kubernetes documentation and configure NodeRestriction plug-in on kubelets. +Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --enable-admission-plugins parameter to a +value that includes NodeRestriction. +--enable-admission-plugins=...,NodeRestriction,... + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins' +``` + +**Expected Result**: + +```console +'--enable-admission-plugins' has 'NodeRestriction' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.16 Ensure that the --secure-port argument is not set to 0 - NoteThis recommendation is obsolete and will be deleted per the consensus process (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and either remove the --secure-port parameter or +set it to a different (non-zero) desired port. + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'secure-port' +``` + +**Expected Result**: + +```console +'--secure-port' is greater than 0 OR '--secure-port' is not present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.17 Ensure that the --profiling argument is set to false (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the below parameter. +--profiling=false + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'profiling' +``` + +**Expected Result**: + +```console +'--profiling' is equal to 'false' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.18 Ensure that the --audit-log-path argument is set (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --audit-log-path parameter to a suitable path and +file where you would like audit logs to be written, for example, +--audit-log-path=/var/log/apiserver/audit.log +Permissive. + +### 1.2.19 Ensure that the --audit-log-maxage argument is set to 30 or as appropriate (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --audit-log-maxage parameter to 30 +or as an appropriate number of days, for example, +--audit-log-maxage=30 +Permissive. + +### 1.2.20 Ensure that the --audit-log-maxbackup argument is set to 10 or as appropriate (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --audit-log-maxbackup parameter to 10 or to an appropriate +value. For example, +--audit-log-maxbackup=10 +Permissive. + +### 1.2.21 Ensure that the --audit-log-maxsize argument is set to 100 or as appropriate (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --audit-log-maxsize parameter to an appropriate size in MB. +For example, to set it as 100 MB, --audit-log-maxsize=100 +Permissive. + +### 1.2.22 Ensure that the --request-timeout argument is set as appropriate (Manual) + + +**Result:** Not Applicable + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +and set the below parameter as appropriate and if needed. +For example, --request-timeout=300s +Permissive. + +### 1.2.23 Ensure that the --service-account-lookup argument is set to true (Automated) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the below parameter. +--service-account-lookup=true +Alternatively, you can delete the --service-account-lookup parameter from this file so +that the default takes effect. + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep -v grep +``` + +**Expected Result**: + +```console +'--service-account-lookup' is not present OR '--service-account-lookup' is equal to 'true' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.24 Ensure that the --service-account-key-file argument is set as appropriate (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --service-account-key-file parameter +to the public key file for service accounts. For example, +--service-account-key-file=\ + +### 1.2.25 Ensure that the --etcd-certfile and --etcd-keyfile arguments are set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Follow the Kubernetes documentation and set up the TLS connection between the apiserver and etcd. +Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the etcd certificate and key file parameters. +--etcd-certfile=\ +--etcd-keyfile=\ + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 1.2.29 +``` + +**Expected Result**: + +```console +'--etcd-certfile' is present AND '--etcd-keyfile' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.26 Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Follow the Kubernetes documentation and set up the TLS connection on the apiserver. +Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the TLS certificate and private key file parameters. +--tls-cert-file=\ +--tls-private-key-file=\ + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep -A1 'Running kube-apiserver' | tail -n2 +``` + +**Expected Result**: + +```console +'--tls-cert-file' is present AND '--tls-private-key-file' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-scheduler --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259" +``` + +### 1.2.27 Ensure that the --client-ca-file argument is set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Follow the Kubernetes documentation and set up the TLS connection on the apiserver. +Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the client certificate authority file. +--client-ca-file=\ + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'client-ca-file' +``` + +**Expected Result**: + +```console +'--client-ca-file' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.28 Ensure that the --etcd-cafile argument is set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Follow the Kubernetes documentation and set up the TLS connection between the apiserver and etcd. +Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the etcd certificate authority file parameter. +--etcd-cafile=\ + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-cafile' +``` + +**Expected Result**: + +```console +'--etcd-cafile' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 1.2.29 Ensure that the --encryption-provider-config argument is set as appropriate (Manual) + + +**Result:** Not Applicable + +**Remediation:** +Follow the Kubernetes documentation and configure a EncryptionConfig file. +Then, edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the --encryption-provider-config parameter to the path of that file. +For example, --encryption-provider-config=\ +Permissive - Enabling encryption changes how data can be recovered as data is encrypted. + +### 1.2.30 Ensure that encryption providers are appropriately configured (Manual) + + +**Result:** Not Applicable + +**Remediation:** +Follow the Kubernetes documentation and configure a EncryptionConfig file. +In this file, choose aescbc, kms or secretbox as the encryption provider. +Permissive - Enabling encryption changes how data can be recovered as data is encrypted. + +### 1.2.32 Ensure that the API Server only makes use of Strong Cryptographic Ciphers (Manual) + + +**Result:** pass + +**Remediation:** +Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml +on the control plane node and set the below parameter. +--tls-cipher-suites=TLS_AES_128_GCM_SHA256,TLS_AES_256_GCM_SHA384,TLS_CHACHA20_POLY1305_SHA256, +TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, +TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384, +TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256, +TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, +TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305, +TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256,TLS_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA, +TLS_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_GCM_SHA384 + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'tls-cipher-suites' +``` + +**Expected Result**: + +```console +'--tls-cipher-suites' contains valid elements from 'TLS_AES_128_GCM_SHA256,TLS_AES_256_GCM_SHA384,TLS_CHACHA20_POLY1305_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256,TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256,TLS_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_GCM_SHA384' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +## 1.3 Controller Manager +### 1.3.1 Ensure that the --terminated-pod-gc-threshold argument is set as appropriate (Manual) + + +**Result:** pass + +**Remediation:** +Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml +on the control plane node and set the --terminated-pod-gc-threshold to an appropriate threshold, +for example, --terminated-pod-gc-threshold=10 + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'terminated-pod-gc-threshold' +``` + +**Expected Result**: + +```console +'--terminated-pod-gc-threshold' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true" +``` + +### 1.3.2 Ensure that the --profiling argument is set to false (Automated) + + +**Result:** pass + +**Remediation:** +Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml +on the control plane node and set the below parameter. +--profiling=false + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'profiling' +``` + +**Expected Result**: + +```console +'--profiling' is equal to 'false' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true" +``` + +### 1.3.3 Ensure that the --use-service-account-credentials argument is set to true (Automated) + + +**Result:** pass + +**Remediation:** +Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml +on the control plane node to set the below parameter. +--use-service-account-credentials=true + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'use-service-account-credentials' +``` + +**Expected Result**: + +```console +'--use-service-account-credentials' is not equal to 'false' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true" +``` + +### 1.3.4 Ensure that the --service-account-private-key-file argument is set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml +on the control plane node and set the --service-account-private-key-file parameter +to the private key file for service accounts. +--service-account-private-key-file=\ + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'service-account-private-key-file' +``` + +**Expected Result**: + +```console +'--service-account-private-key-file' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true" +``` + +### 1.3.5 Ensure that the --root-ca-file argument is set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml +on the control plane node and set the --root-ca-file parameter to the certificate bundle file`. +--root-ca-file=\ + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'root-ca-file' +``` + +**Expected Result**: + +```console +'--root-ca-file' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-controller-manager --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true" +``` + +### 1.3.6 Ensure that the RotateKubeletServerCertificate argument is set to true (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml +on the control plane node and set the --feature-gates parameter to include RotateKubeletServerCertificate=true. +--feature-gates=RotateKubeletServerCertificate=true +Not Applicable. + +### 1.3.7 Ensure that the --bind-address argument is set to 127.0.0.1 (Automated) + + +**Result:** pass + +**Remediation:** +Edit the Controller Manager pod specification file /etc/kubernetes/manifests/kube-controller-manager.yaml +on the control plane node and ensure the correct value for the --bind-address parameter + +**Audit:** + +```bash +/bin/ps -ef | grep containerd | grep -v grep +``` + +**Expected Result**: + +```console +'--bind-address' is present OR '--bind-address' is not present +``` + +**Returned Value**: + +```console +root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 663 1 0 Sep11 ? 00:00:08 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd root 3021 1 0 Sep11 ? 00:00:29 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 4790d392966915d995e666002c56ed4cce6dd86f305ce2ee390547a1fcbf6c82 -address /run/k3s/containerd/containerd.sock root 3035 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 9d73e6a160ccde6c7c7d4ba0df3b9f696e3de2ebfc0f19a1dcbdf13aea496427 -address /run/k3s/containerd/containerd.sock root 3235 1 0 Sep11 ? 00:00:31 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 587f6221ee9f36c877231ada8d816a799dfda186332c33378d1eb16c72cdc87d -address /run/k3s/containerd/containerd.sock root 4435 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id a74c9ec7d99785c2f2d4e6826aa80c22eb8b38249e8f99679ece00a818e9b7b3 -address /run/k3s/containerd/containerd.sock root 4985 1 0 Sep11 ? 00:00:53 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5b0c9784dbe0fcbe8be10c857976e70ec84a208cb814e87b5ca085a02d434f8c -address /run/k3s/containerd/containerd.sock root 5056 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id f3231ff35f18056e74eda14907f296be15f7ea1c6ae5ab7904e27d4d18183301 -address /run/k3s/containerd/containerd.sock root 5868 1 0 Sep11 ? 00:00:27 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 3e908c4d0b10df275bdef6f72fbcfa09517d11cf749236ad020364e14d77bc93 -address /run/k3s/containerd/containerd.sock root 6158 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id bec5780a5c73fa3154aa3b5ee26cdf23202db821205893e7e66ae17e6103e97b -address /run/k3s/containerd/containerd.sock root 7366 1 0 Sep11 ? 00:00:28 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id a81b78845bdcaef710314c93e5ea0d0617f37a8929472f7b570ab90c6667f57f -address /run/k3s/containerd/containerd.sock root 97274 1 0 16:13 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id c90652c935d9e79af45b9a9ac2b4fe315e2a761a0525737fdb95c680123a164c -address /run/k3s/containerd/containerd.sock root 98309 1 0 16:16 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 431a2763636488efd7d104c228d41f4f2ecd8c06a7fc375d8977ab0d238936a8 -address /run/k3s/containerd/containerd.sock root 98493 1 0 16:16 ? 00:00:00 /var/lib/rancher/k3s/data/3cdacaf539fc388d8e542a8d643948e3c7bfa4a7e91b7521102325e0ce8581b6/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5b480d2fa55c8cc0105ec1902887040c017f03d5b1eb6c73c24bb9d523ad9b37 -address /run/k3s/containerd/containerd.sock +``` + +## 1.4 Scheduler +### 1.4.1 Ensure that the --profiling argument is set to false (Automated) + + +**Result:** pass + +**Remediation:** +Edit the Scheduler pod specification file /etc/kubernetes/manifests/kube-scheduler.yaml file +on the control plane node and set the below parameter. +--profiling=false + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-scheduler' | tail -n1 +``` + +**Expected Result**: + +```console +'--profiling' is equal to 'false' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-scheduler --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259" +``` + +### 1.4.2 Ensure that the --bind-address argument is set to 127.0.0.1 (Automated) + + +**Result:** pass + +**Remediation:** +Edit the Scheduler pod specification file /etc/kubernetes/manifests/kube-scheduler.yaml +on the control plane node and ensure the correct value for the --bind-address parameter + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-scheduler' | tail -n1 | grep 'bind-address' +``` + +**Expected Result**: + +```console +'--bind-address' is equal to '127.0.0.1' OR '--bind-address' is not present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/kube-scheduler --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259" +``` + +## 2 Etcd Node Configuration +### 2.1 Ensure that the --cert-file and --key-file arguments are set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Follow the etcd service documentation and configure TLS encryption. +Then, edit the etcd pod specification file /etc/kubernetes/manifests/etcd.yaml +on the master node and set the below parameters. +--cert-file=\ +--key-file=\ + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 2.1 +``` + +**Expected Result**: + +```console +'cert-file' is present AND 'key-file' is present +``` + +**Returned Value**: + +```console +cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key +``` + +### 2.2 Ensure that the --client-cert-auth argument is set to true (Automated) + + +**Result:** pass + +**Remediation:** +Edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master +node and set the below parameter. +--client-cert-auth="true" + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 2.2 +``` + +**Expected Result**: + +```console +'--client-cert-auth' is present OR 'client-cert-auth' is equal to 'true' +``` + +**Returned Value**: + +```console +client-cert-auth: true +``` + +### 2.3 Ensure that the --auto-tls argument is not set to true (Automated) + + +**Result:** pass + +**Remediation:** +Edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master +node and either remove the --auto-tls parameter or set it to false. + --auto-tls=false + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 2.3 +``` + +**Expected Result**: + +```console +'ETCD_AUTO_TLS' is not present OR 'ETCD_AUTO_TLS' is present +``` + +**Returned Value**: + +```console +error: process ID list syntax error Usage: ps [options] Try 'ps --help \' or 'ps --help \' for additional help text. For more details see ps(1). cat: /proc//environ: No such file or directory +``` + +### 2.4 Ensure that the --peer-cert-file and --peer-key-file arguments are set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +Follow the etcd service documentation and configure peer TLS encryption as appropriate +for your etcd cluster. +Then, edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the +master node and set the below parameters. +--peer-client-file=\ +--peer-key-file=\ + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 2.4 +``` + +**Expected Result**: + +```console +'cert-file' is present AND 'key-file' is present +``` + +**Returned Value**: + +```console +cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key +``` + +### 2.5 Ensure that the --peer-client-cert-auth argument is set to true (Automated) + + +**Result:** pass + +**Remediation:** +Edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master +node and set the below parameter. +--peer-client-cert-auth=true + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 2.5 +``` + +**Expected Result**: + +```console +'--client-cert-auth' is present OR 'client-cert-auth' is equal to 'true' +``` + +**Returned Value**: + +```console +client-cert-auth: true +``` + +### 2.6 Ensure that the --peer-auto-tls argument is not set to true (Automated) + + +**Result:** pass + +**Remediation:** +Edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master +node and either remove the --peer-auto-tls parameter or set it to false. +--peer-auto-tls=false + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 2.6 +``` + +**Expected Result**: + +```console +'ETCD_PEER_AUTO_TLS' is not present OR 'ETCD_PEER_AUTO_TLS' is present +``` + +**Returned Value**: + +```console +error: process ID list syntax error Usage: ps [options] Try 'ps --help \' or 'ps --help \' for additional help text. For more details see ps(1). cat: /proc//environ: No such file or directory +``` + +### 2.7 Ensure that a unique Certificate Authority is used for etcd (Automated) + + +**Result:** pass + +**Remediation:** +[Manual test] +Follow the etcd documentation and create a dedicated certificate authority setup for the +etcd service. +Then, edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the +master node and set the below parameter. +--trusted-ca-file= + +**Audit Script:** `check_for_k3s_etcd.sh` + +```bash +#!/bin/bash + +# This script is used to ensure that k3s is actually running etcd (and not other databases like sqlite3) +# before it checks the requirement +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + + +if [[ "$(journalctl -D /var/log/journal -u k3s | grep 'Managed etcd cluster initializing' | grep -v grep | wc -l)" -gt 0 ]]; then + case $1 in + "1.1.11") + echo $(stat -c %a /var/lib/rancher/k3s/server/db/etcd);; + "1.2.29") + echo $(journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-');; + "2.1") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.2") + echo $(grep -A 5 'client-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.3") + echo $(grep 'auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.4") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep -E 'cert-file|key-file');; + "2.5") + echo $(grep -A 5 'peer-transport-security' /var/lib/rancher/k3s/server/db/etcd/config | grep 'client-cert-auth');; + "2.6") + echo $(grep 'peer-auto-tls' /var/lib/rancher/k3s/server/db/etcd/config);; + "2.7") + echo $(grep 'trusted-ca-file' /var/lib/rancher/k3s/server/db/etcd/config);; + esac +else +# If another database is running, return whatever is required to pass the scan + case $1 in + "1.1.11") + echo "700";; + "1.2.29") + echo "--etcd-certfile AND --etcd-keyfile";; + "2.1") + echo "cert-file AND key-file";; + "2.2") + echo "--client-cert-auth=true";; + "2.3") + echo "false";; + "2.4") + echo "peer-cert-file AND peer-key-file";; + "2.5") + echo "--client-cert-auth=true";; + "2.6") + echo "--peer-auto-tls=false";; + "2.7") + echo "--trusted-ca-file";; + esac +fi + +``` + +**Audit Execution:** + +```bash +./check_for_k3s_etcd.sh 2.7 +``` + +**Expected Result**: + +```console +'trusted-ca-file' is present +``` + +**Returned Value**: + +```console +trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt +``` + +## 3.1 Authentication and Authorization +### 3.1.1 Client certificate authentication should not be used for users (Manual) + + +**Result:** warn + +**Remediation:** +Alternative mechanisms provided by Kubernetes such as the use of OIDC should be +implemented in place of client certificates. + +### 3.1.2 Service account token authentication should not be used for users (Manual) + + +**Result:** warn + +**Remediation:** +Alternative mechanisms provided by Kubernetes such as the use of OIDC should be implemented +in place of service account tokens. + +### 3.1.3 Bootstrap token authentication should not be used for users (Manual) + + +**Result:** warn + +**Remediation:** +Alternative mechanisms provided by Kubernetes such as the use of OIDC should be implemented +in place of bootstrap tokens. + +## 3.2 Logging +### 3.2.1 Ensure that a minimal audit policy is created (Manual) + + +**Result:** pass + +**Remediation:** +Create an audit policy file for your cluster. + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'audit-policy-file' +``` + +**Expected Result**: + +```console +'--audit-policy-file' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 3.2.2 Ensure that the audit policy covers key security concerns (Manual) + + +**Result:** warn + +**Remediation:** +Review the audit policy provided for the cluster and ensure that it covers +at least the following areas, +- Access to Secrets managed by the cluster. Care should be taken to only + log Metadata for requests to Secrets, ConfigMaps, and TokenReviews, in + order to avoid risk of logging sensitive data. +- Modification of Pod and Deployment objects. +- Use of `pods/exec`, `pods/portforward`, `pods/proxy` and `services/proxy`. +For most requests, minimally logging at the Metadata level is recommended +(the most basic level of logging). + +## 4.1 Worker Node Configuration Files +### 4.1.1 Ensure that the kubelet service file permissions are set to 600 or more restrictive (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the each worker node. +For example, chmod 600 /etc/systemd/system/kubelet.service.d/10-kubeadm.conf +Not Applicable - All configuration is passed in as arguments at container run time. + +### 4.1.2 Ensure that the kubelet service file ownership is set to root:root (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the below command (based on the file location on your system) on the each worker node. +For example, +chown root:root /etc/systemd/system/kubelet.service.d/10-kubeadm.conf +Not Applicable. + All configuration is passed in as arguments at container run time. + +### 4.1.3 If proxy kubeconfig file exists ensure permissions are set to 600 or more restrictive (Manual) + + +**Result:** warn + +**Remediation:** +Run the below command (based on the file location on your system) on the each worker node. +For example, +chmod 600 /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig + +**Audit:** + +```bash +stat -c %a /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig +``` + +**Expected Result**: + +```console +'permissions' is present +``` + +**Returned Value**: + +```console +600 +``` + +### 4.1.4 If proxy kubeconfig file exists ensure ownership is set to root:root (Manual) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the each worker node. +For example, chown root:root /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig + +**Audit:** + +```bash +/bin/sh -c 'if test -e /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig; then stat -c %U:%G /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig; fi' +``` + +**Expected Result**: + +```console +'root:root' is present +``` + +**Returned Value**: + +```console +root:root +``` + +### 4.1.5 Ensure that the --kubeconfig kubelet.conf file permissions are set to 600 or more restrictive (Automated) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the each worker node. +For example, +chmod 600 /var/lib/rancher/k3s/server/cred/admin.kubeconfig + +**Audit:** + +```bash +/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/admin.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/server/cred/admin.kubeconfig; fi' +``` + +**Expected Result**: + +```console +permissions has permissions 600, expected 600 or more restrictive +``` + +**Returned Value**: + +```console +permissions=600 +``` + +### 4.1.6 Ensure that the --kubeconfig kubelet.conf file ownership is set to root:root (Automated) + + +**Result:** pass + +**Remediation:** +Run the below command (based on the file location on your system) on the each worker node. +For example, +chown root:root /var/lib/rancher/k3s/server/cred/admin.kubeconfig + +**Audit:** + +```bash +stat -c %U:%G /var/lib/rancher/k3s/agent/kubelet.kubeconfig +``` + +**Expected Result**: + +```console +'root:root' is present +``` + +**Returned Value**: + +```console +root:root +``` + +### 4.1.7 Ensure that the certificate authorities file permissions are set to 600 or more restrictive (Manual) + + +**Result:** warn + +**Remediation:** +Run the following command to modify the file permissions of the +--client-ca-file chmod 600 \ + +**Audit:** + +```bash +stat -c %a /var/lib/rancher/k3s/server/tls/server-ca.crt +``` + +**Expected Result**: + +```console +'permissions' is present +``` + +**Returned Value**: + +```console +644 +``` + +### 4.1.8 Ensure that the client certificate authorities file ownership is set to root:root (Manual) + + +**Result:** pass + +**Remediation:** +Run the following command to modify the ownership of the --client-ca-file. +chown root:root \ + +**Audit:** + +```bash +stat -c %U:%G /var/lib/rancher/k3s/server/tls/client-ca.crt +``` + +**Expected Result**: + +```console +'root:root' is equal to 'root:root' +``` + +**Returned Value**: + +```console +root:root +``` + +### 4.1.9 Ensure that the kubelet --config configuration file has permissions set to 600 or more restrictive (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the following command (using the config file location identified in the Audit step) +chmod 600 /var/lib/kubelet/config.yaml + +### 4.1.10 Ensure that the kubelet --config configuration file ownership is set to root:root (Automated) + + +**Result:** Not Applicable + +**Remediation:** +Run the following command (using the config file location identified in the Audit step) +chown root:root /var/lib/kubelet/config.yaml +Not Applicable. +All configuration is passed in as arguments at container run time. + +## 4.2 Kubelet +### 4.2.1 Ensure that the --anonymous-auth argument is set to false (Automated) + + +**Result:** pass + +**Remediation:** +If using a Kubelet config file, edit the file to set `authentication: anonymous: enabled` to +`false`. +If using executable arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. +`--anonymous-auth=false` +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "anonymous-auth" | grep -v grep; else echo "--anonymous-auth=false"; fi' +``` + +**Expected Result**: + +```console +'--anonymous-auth' is equal to 'false' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 4.2.2 Ensure that the --authorization-mode argument is not set to AlwaysAllow (Automated) + + +**Result:** pass + +**Remediation:** +If using a Kubelet config file, edit the file to set `authorization.mode` to Webhook. If +using executable arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +set the below parameter in KUBELET_AUTHZ_ARGS variable. +--authorization-mode=Webhook +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "authorization-mode" | grep -v grep; else echo "--authorization-mode=Webhook"; fi' +``` + +**Audit Config:** + +```bash +/bin/sh -c 'if test -e /var/lib/kubelet/config.yaml; then /bin/cat /var/lib/kubelet/config.yaml; fi' +``` + +**Expected Result**: + +```console +'--authorization-mode' does not have 'AlwaysAllow' +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 4.2.3 Ensure that the --client-ca-file argument is set as appropriate (Automated) + + +**Result:** pass + +**Remediation:** +If using a Kubelet config file, edit the file to set `authentication.x509.clientCAFile` to +the location of the client CA file. +If using command line arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +set the below parameter in KUBELET_AUTHZ_ARGS variable. +--client-ca-file=\ +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "client-ca-file" | grep -v grep; else echo "--client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt"; fi' +``` + +**Expected Result**: + +```console +'--client-ca-file' is present +``` + +**Returned Value**: + +```console +Sep 11 20:52:00 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:00Z" level=info msg="Running kube-apiserver --admission-control-config-file=/etc/rancher/k3s/config/rancher-psact.yaml --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction,ServiceAccount --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --request-timeout=300s --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-lookup=true --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key" +``` + +### 4.2.4 Verify that the --read-only-port argument is set to 0 (Manual) + + +**Result:** pass + +**Remediation:** +If using a Kubelet config file, edit the file to set `readOnlyPort` to 0. +If using command line arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. +--read-only-port=0 +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kubelet' | tail -n1 | grep 'read-only-port' +``` + +**Audit Config:** + +```bash +/bin/sh -c 'if test -e /var/lib/kubelet/config.yaml; then /bin/cat /var/lib/kubelet/config.yaml; fi' +``` + +**Expected Result**: + +```console +'--read-only-port' is equal to '0' OR '--read-only-port' is not present +``` + +**Returned Value**: + +```console +Sep 11 20:52:15 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:15Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=ip-172-31-12-34 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-labels=cattle.io/os=linux,rke.cattle.io/machine=af02ecbc-1e4e-422e-8b4d-4b2aa24a9d46 --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key" +``` + +### 4.2.5 Ensure that the --streaming-connection-idle-timeout argument is not set to 0 (Manual) + + +**Result:** warn + +**Remediation:** +If using a Kubelet config file, edit the file to set `streamingConnectionIdleTimeout` to a +value other than 0. +If using command line arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. +--streaming-connection-idle-timeout=5m +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kubelet' | tail -n1 | grep 'streaming-connection-idle-timeout' +``` + +### 4.2.6 Ensure that the --make-iptables-util-chains argument is set to true (Automated) + + +**Result:** pass + +**Remediation:** +If using a Kubelet config file, edit the file to set `makeIPTablesUtilChains` to `true`. +If using command line arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +remove the --make-iptables-util-chains argument from the +KUBELET_SYSTEM_PODS_ARGS variable. +Based on your system, restart the kubelet service. For example: +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +journalctl -D /var/log/journal -u k3s | grep 'Running kubelet' | tail -n1 | grep 'make-iptables-util-chains' +``` + +**Expected Result**: + +```console +'--make-iptables-util-chains' is equal to 'true' OR '--make-iptables-util-chains' is not present +``` + +**Returned Value**: + +```console +Sep 11 20:52:15 ip-172-31-12-34 k3s[2340]: time="2023-09-11T20:52:15Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=ip-172-31-12-34 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-labels=cattle.io/os=linux,rke.cattle.io/machine=af02ecbc-1e4e-422e-8b4d-4b2aa24a9d46 --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key" +``` + +### 4.2.7 Ensure that the --hostname-override argument is not set (Manual) + + +**Result:** Not Applicable + +**Remediation:** +Edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf +on each worker node and remove the --hostname-override argument from the +KUBELET_SYSTEM_PODS_ARGS variable. +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service +Not Applicable. + +### 4.2.8 Ensure that the eventRecordQPS argument is set to a level which ensures appropriate event capture (Manual) + + +**Result:** pass + +**Remediation:** +If using a Kubelet config file, edit the file to set `eventRecordQPS` to an appropriate level. +If using command line arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable. +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +/bin/ps -fC containerd +``` + +**Audit Config:** + +```bash +/bin/sh -c 'if test -e /var/lib/kubelet/config.yaml; then /bin/cat /var/lib/kubelet/config.yaml; fi' +``` + +**Expected Result**: + +```console +'--event-qps' is present OR '--event-qps' is not present +``` + +**Returned Value**: + +```console +UID PID PPID C STIME TTY TIME CMD root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd +``` + +### 4.2.9 Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Manual) + + +**Result:** Not Applicable + +**Remediation:** +If using a Kubelet config file, edit the file to set `tlsCertFile` to the location +of the certificate file to use to identify this Kubelet, and `tlsPrivateKeyFile` +to the location of the corresponding private key file. +If using command line arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +set the below parameters in KUBELET_CERTIFICATE_ARGS variable. +--tls-cert-file=\ +--tls-private-key-file=\ +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service +Permissive - When generating serving certificates, functionality could break in conjunction with hostname overrides which are required for certain cloud providers. + +### 4.2.10 Ensure that the --rotate-certificates argument is not set to false (Manual) + + +**Result:** pass + +**Remediation:** +If using a Kubelet config file, edit the file to add the line `rotateCertificates` to `true` or +remove it altogether to use the default value. +If using command line arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +remove --rotate-certificates=false argument from the KUBELET_CERTIFICATE_ARGS +variable. +Based on your system, restart the kubelet service. For example, +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +/bin/ps -fC containerd +``` + +**Audit Config:** + +```bash +/bin/sh -c 'if test -e /var/lib/kubelet/config.yaml; then /bin/cat /var/lib/kubelet/config.yaml; fi' +``` + +**Expected Result**: + +```console +'--rotate-certificates' is present OR '--rotate-certificates' is not present +``` + +**Returned Value**: + +```console +UID PID PPID C STIME TTY TIME CMD root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd +``` + +### 4.2.11 Verify that the RotateKubeletServerCertificate argument is set to true (Manual) + + +**Result:** pass + +**Remediation:** +Edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf +on each worker node and set the below parameter in KUBELET_CERTIFICATE_ARGS variable. +--feature-gates=RotateKubeletServerCertificate=true +Based on your system, restart the kubelet service. For example: +systemctl daemon-reload +systemctl restart kubelet.service +Not Applicable. + +**Audit:** + +```bash +/bin/ps -fC containerd +``` + +**Audit Config:** + +```bash +/bin/cat /var/lib/kubelet/config.yaml +``` + +**Expected Result**: + +```console +'RotateKubeletServerCertificate' is present OR 'RotateKubeletServerCertificate' is not present +``` + +**Returned Value**: + +```console +UID PID PPID C STIME TTY TIME CMD root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd +``` + +### 4.2.12 Ensure that the Kubelet only makes use of Strong Cryptographic Ciphers (Manual) + + +**Result:** warn + +**Remediation:** +If using a Kubelet config file, edit the file to set `TLSCipherSuites` to +TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_128_GCM_SHA256 +or to a subset of these values. +If using executable arguments, edit the kubelet service file +/etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and +set the --tls-cipher-suites parameter as follows, or to a subset of these values. +--tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_128_GCM_SHA256 +Based on your system, restart the kubelet service. For example: +systemctl daemon-reload +systemctl restart kubelet.service + +**Audit:** + +```bash +/bin/ps -fC containerd +``` + +**Audit Config:** + +```bash +/bin/sh -c 'if test -e /var/lib/kubelet/config.yaml; then /bin/cat /var/lib/kubelet/config.yaml; fi' +``` + +**Expected Result**: + +```console +'--tls-cipher-suites' is present +``` + +**Returned Value**: + +```console +UID PID PPID C STIME TTY TIME CMD root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd +``` + +### 4.2.13 Ensure that a limit is set on pod PIDs (Manual) + + +**Result:** warn + +**Remediation:** +Decide on an appropriate level for this parameter and set it, +either via the --pod-max-pids command line parameter or the PodPidsLimit configuration file setting. + +**Audit:** + +```bash +/bin/ps -fC containerd +``` + +**Audit Config:** + +```bash +/bin/sh -c 'if test -e /var/lib/kubelet/config.yaml; then /bin/cat /var/lib/kubelet/config.yaml; fi' +``` + +**Expected Result**: + +```console +'--pod-max-pids' is present +``` + +**Returned Value**: + +```console +UID PID PPID C STIME TTY TIME CMD root 527 1 0 Sep11 ? 00:01:28 /usr/bin/containerd root 2361 2340 3 Sep11 ? 00:40:19 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd +``` + +## 5.1 RBAC and Service Accounts +### 5.1.1 Ensure that the cluster-admin role is only used where required (Manual) + + +**Result:** warn + +**Remediation:** +Identify all clusterrolebindings to the cluster-admin role. Check if they are used and +if they need this role or if they could use a role with fewer privileges. +Where possible, first bind users to a lower privileged role and then remove the +clusterrolebinding to the cluster-admin role : +kubectl delete clusterrolebinding [name] + +### 5.1.2 Minimize access to secrets (Manual) + + +**Result:** warn + +**Remediation:** +Where possible, remove get, list and watch access to Secret objects in the cluster. + +### 5.1.3 Minimize wildcard use in Roles and ClusterRoles (Manual) + + +**Result:** warn + +**Remediation:** +Where possible replace any use of wildcards in clusterroles and roles with specific +objects or actions. + +### 5.1.4 Minimize access to create pods (Manual) + + +**Result:** warn + +**Remediation:** +Where possible, remove create access to pod objects in the cluster. + +### 5.1.5 Ensure that default service accounts are not actively used. (Manual) + + +**Result:** pass + +**Remediation:** +Create explicit service accounts wherever a Kubernetes workload requires specific access +to the Kubernetes API server. +Modify the configuration of each default service account to include this value +automountServiceAccountToken: false + +**Audit Script:** `check_for_default_sa.sh` + +```bash +#!/bin/bash + +set -eE + +handle_error() { + echo "false" +} + +trap 'handle_error' ERR + +count_sa=$(kubectl get serviceaccounts --all-namespaces -o json | jq -r '.items[] | select(.metadata.name=="default") | select((.automountServiceAccountToken == null) or (.automountServiceAccountToken == true))' | jq .metadata.namespace | wc -l) +if [[ ${count_sa} -gt 0 ]]; then + echo "false" + exit +fi + +for ns in $(kubectl get ns --no-headers -o custom-columns=":metadata.name") +do + for result in $(kubectl get clusterrolebinding,rolebinding -n $ns -o json | jq -r '.items[] | select((.subjects[]?.kind=="ServiceAccount" and .subjects[]?.name=="default") or (.subjects[]?.kind=="Group" and .subjects[]?.name=="system:serviceaccounts"))' | jq -r '"\(.roleRef.kind),\(.roleRef.name)"') + do + read kind name <<<$(IFS=","; echo $result) + resource_count=$(kubectl get $kind $name -n $ns -o json | jq -r '.rules[] | select(.resources[]? != "podsecuritypolicies")' | wc -l) + if [[ ${resource_count} -gt 0 ]]; then + echo "false" + exit + fi + done +done + + +echo "true" + +``` + +**Audit Execution:** + +```bash +./check_for_default_sa.sh +``` + +**Expected Result**: + +```console +'true' is equal to 'true' +``` + +**Returned Value**: + +```console +true +``` + +### 5.1.6 Ensure that Service Account Tokens are only mounted where necessary (Manual) + + +**Result:** warn + +**Remediation:** +Modify the definition of pods and service accounts which do not need to mount service +account tokens to disable it. + +### 5.1.7 Avoid use of system:masters group (Manual) + + +**Result:** warn + +**Remediation:** +Remove the system:masters group from all users in the cluster. + +### 5.1.8 Limit use of the Bind, Impersonate and Escalate permissions in the Kubernetes cluster (Manual) + + +**Result:** warn + +**Remediation:** +Where possible, remove the impersonate, bind and escalate rights from subjects. + +### 5.1.9 Minimize access to create persistent volumes (Manual) + + +**Result:** warn + +**Remediation:** +Where possible, remove create access to PersistentVolume objects in the cluster. + +### 5.1.10 Minimize access to the proxy sub-resource of nodes (Manual) + + +**Result:** warn + +**Remediation:** +Where possible, remove access to the proxy sub-resource of node objects. + +### 5.1.11 Minimize access to the approval sub-resource of certificatesigningrequests objects (Manual) + + +**Result:** warn + +**Remediation:** +Where possible, remove access to the approval sub-resource of certificatesigningrequest objects. + +### 5.1.12 Minimize access to webhook configuration objects (Manual) + + +**Result:** warn + +**Remediation:** +Where possible, remove access to the validatingwebhookconfigurations or mutatingwebhookconfigurations objects + +### 5.1.13 Minimize access to the service account token creation (Manual) + + +**Result:** warn + +**Remediation:** +Where possible, remove access to the token sub-resource of serviceaccount objects. + +## 5.2 Pod Security Standards +### 5.2.1 Ensure that the cluster has at least one active policy control mechanism in place (Manual) + + +**Result:** warn + +**Remediation:** +Ensure that either Pod Security Admission or an external policy control system is in place +for every namespace which contains user workloads. + +### 5.2.2 Minimize the admission of privileged containers (Manual) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of privileged containers. + +### 5.2.3 Minimize the admission of containers wishing to share the host process ID namespace (Automated) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of `hostPID` containers. + +### 5.2.4 Minimize the admission of containers wishing to share the host IPC namespace (Automated) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of `hostIPC` containers. + +### 5.2.5 Minimize the admission of containers wishing to share the host network namespace (Automated) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of `hostNetwork` containers. + +### 5.2.6 Minimize the admission of containers with allowPrivilegeEscalation (Automated) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of containers with `.spec.allowPrivilegeEscalation` set to `true`. + +### 5.2.7 Minimize the admission of root containers (Automated) + + +**Result:** warn + +**Remediation:** +Create a policy for each namespace in the cluster, ensuring that either `MustRunAsNonRoot` +or `MustRunAs` with the range of UIDs not including 0, is set. + +### 5.2.8 Minimize the admission of containers with the NET_RAW capability (Automated) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of containers with the `NET_RAW` capability. + +### 5.2.9 Minimize the admission of containers with added capabilities (Automated) + + +**Result:** warn + +**Remediation:** +Ensure that `allowedCapabilities` is not present in policies for the cluster unless +it is set to an empty array. + +### 5.2.10 Minimize the admission of containers with capabilities assigned (Manual) + + +**Result:** warn + +**Remediation:** +Review the use of capabilites in applications running on your cluster. Where a namespace +contains applicaions which do not require any Linux capabities to operate consider adding +a PSP which forbids the admission of containers which do not drop all capabilities. + +### 5.2.11 Minimize the admission of Windows HostProcess containers (Manual) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of containers that have `.securityContext.windowsOptions.hostProcess` set to `true`. + +### 5.2.12 Minimize the admission of HostPath volumes (Manual) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of containers with `hostPath` volumes. + +### 5.2.13 Minimize the admission of containers which use HostPorts (Manual) + + +**Result:** warn + +**Remediation:** +Add policies to each namespace in the cluster which has user workloads to restrict the +admission of containers which use `hostPort` sections. + +## 5.3 Network Policies and CNI +### 5.3.1 Ensure that the CNI in use supports NetworkPolicies (Manual) + + +**Result:** warn + +**Remediation:** +If the CNI plugin in use does not support network policies, consideration should be given to +making use of a different plugin, or finding an alternate mechanism for restricting traffic +in the Kubernetes cluster. + +### 5.3.2 Ensure that all Namespaces have NetworkPolicies defined (Manual) + + +**Result:** warn + +**Remediation:** +Follow the documentation and create NetworkPolicy objects as you need them. + +## 5.4 Secrets Management +### 5.4.1 Prefer using Secrets as files over Secrets as environment variables (Manual) + + +**Result:** warn + +**Remediation:** +If possible, rewrite application code to read Secrets from mounted secret files, rather than +from environment variables. + +### 5.4.2 Consider external secret storage (Manual) + + +**Result:** warn + +**Remediation:** +Refer to the Secrets management options offered by your cloud provider or a third-party +secrets management solution. + +## 5.5 Extensible Admission Control +### 5.5.1 Configure Image Provenance using ImagePolicyWebhook admission controller (Manual) + + +**Result:** warn + +**Remediation:** +Follow the Kubernetes documentation and setup image provenance. + +## 5.7 General Policies +### 5.7.1 Create administrative boundaries between resources using namespaces (Manual) + + +**Result:** warn + +**Remediation:** +Follow the documentation and create namespaces for objects in your deployment as you need +them. + +### 5.7.2 Ensure that the seccomp profile is set to docker/default in your Pod definitions (Manual) + + +**Result:** warn + +**Remediation:** +Use `securityContext` to enable the docker/default seccomp profile in your pod definitions. +An example is as below: + securityContext: + seccompProfile: + type: RuntimeDefault + +### 5.7.3 Apply SecurityContext to your Pods and Containers (Manual) + + +**Result:** warn + +**Remediation:** +Follow the Kubernetes documentation and apply SecurityContexts to your Pods. For a +suggested list of SecurityContexts, you may refer to the CIS Security Benchmark for Docker +Containers. + +### 5.7.4 The default namespace should not be used (Manual) + + +**Result:** warn + +**Remediation:** +Ensure that namespaces are created to allow for appropriate segregation of Kubernetes +resources and that all new resources are created in a specific namespace. +