#536 Updating link and wording of note regarding upgrades (#537)

* #536 outdated references to nginx helm chart version

updated link to nginx migration guide

* rewording note

* typo fix

docs/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-aks.md

@@ -50,7 +50,7 @@ To create an AKS cluster, run the following command. Use a VM size that applies
 
 :::note
 
-If the version of Kubernetes is updated to v1.22 or later, the version of ingress-nginx would also need to be [updated](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1).
+If you're updating from an older version of Kubernetes, to Kubernetes v1.22 or above, you also need to [update](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/) ingress-nginx.
 
 :::
 

docs/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-amazon-eks.md

@@ -79,7 +79,7 @@ Then enter the following values:
 
 To create an EKS cluster, run the following command. Use the AWS region that applies to your use case. When choosing a Kubernetes version, be sure to first consult the [support matrix](https://rancher.com/support-matrix/) to find the highest version of Kubernetes that has been validated for your Rancher version.
 
-**Note:** If the version of Kubernetes is updated to v1.22 or later, the version of ingress-nginx would also need to be [updated](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1).
+**Note:** If you're updating from an older version of Kubernetes, to Kubernetes v1.22 or above, you also need to [update](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/) ingress-nginx.
 
 ```
 eksctl create cluster \

docs/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-gke.md

@@ -120,7 +120,7 @@ When choosing a Kubernetes version, be sure to first consult the [support matrix
 
 To successfully create a GKE cluster with Rancher, your GKE must be in Standard mode. GKE has two modes of operation when creating a Kubernetes cluster, Autopilot and Standard mode. The cluster configuration for Autopilot mode has restrictions on editing the kube-system namespace. However, Rancher needs to create resources in the kube-system namespace during installation. As a result, you will not be able to install Rancher on a GKE cluster created in Autopilot mode. For more information about the difference between GKE Autopilot mode and Standard mode, visit [Compare GKE Autopilot and Standard.](https://cloud.google.com/kubernetes-engine/docs/resources/autopilot-standard-feature-comparison)
 
-**Note:** If the version of Kubernetes is updated to v1.22 or later, the version of ingress-nginx would also need to be [updated](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1).
+**Note:** If you're updating from an older version of Kubernetes, to Kubernetes v1.22 or above, you also need to [update](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/) ingress-nginx.
 
 ```
 gcloud container clusters create cluster-name --num-nodes=3 --cluster-version=<VERSION>

i18n/zh/docusaurus-plugin-content-docs/current/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-aks.md

@@ -50,7 +50,7 @@ az group create --name rancher-rg --location eastus
 
 :::note
 
-如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1)。
+如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/)。
 
 :::
 

i18n/zh/docusaurus-plugin-content-docs/current/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-amazon-eks.md

@@ -79,7 +79,7 @@ aws configure
 
 运行以下命令创建一个 EKS 集群。使用适用于你的用例的 AWS 区域。在选择 Kubernetes 版本时，请务必先查阅[支持矩阵](https://rancher.com/support-matrix/)，以找出已针对你的 Rancher 版本验证的最新 Kubernetes 版本。
 
-**注意**：如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1)。
+**注意**：如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/)。
 
 ```
 eksctl create cluster \

i18n/zh/docusaurus-plugin-content-docs/current/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-gke.md

@@ -120,7 +120,7 @@ Your active configuration is: [default]
 
 要使用 Rancher 成功创建 GKE 集群，GKE 必须处于 Standard 模式。GKE 在创建 Kubernetes 集群时有两种运行模式，分别是 Autopilot 和 Standard 模式。Autopilot 模式的集群配置对编辑 kube-system 命名空间有限制。但是，Rancher 在安装时需要在 kube-system 命名空间中创建资源。因此，你将无法在以 Autopilot 模式创建的 GKE 集群上安装 Rancher。如需详细了解 GKE Autopilot 模式和 Standard 模式之间的差异，请访问[比较 GKE Autopilot 和 Standard ](https://cloud.google.com/kubernetes-engine/docs/resources/autopilot-standard-feature-comparison)。
 
-**注意**：如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1)。
+**注意**：如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/)。
 
 ```
 gcloud container clusters create cluster-name --num-nodes=3 --cluster-version=<VERSION>

i18n/zh/docusaurus-plugin-content-docs/version-2.6/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-aks.md

@@ -50,7 +50,7 @@ az group create --name rancher-rg --location eastus
 
 :::note
 
-如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1)。
+如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/)。
 
 :::
 

i18n/zh/docusaurus-plugin-content-docs/version-2.6/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-amazon-eks.md

@@ -79,7 +79,7 @@ aws configure
 
 运行以下命令创建一个 EKS 集群。使用适用于你的用例的 AWS 区域。在选择 Kubernetes 版本时，请务必先查阅[支持矩阵](https://rancher.com/support-matrix/)，以找出已针对你的 Rancher 版本验证的最新 Kubernetes 版本。
 
-**注意**：如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1)。
+**注意**：如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/)。
 
 ```
 eksctl create cluster \

i18n/zh/docusaurus-plugin-content-docs/version-2.6/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-gke.md

@@ -120,7 +120,7 @@ Your active configuration is: [default]
 
 要使用 Rancher 成功创建 GKE 集群，GKE 必须处于 Standard 模式。GKE 在创建 Kubernetes 集群时有两种运行模式，分别是 Autopilot 和 Standard 模式。Autopilot 模式的集群配置对编辑 kube-system 命名空间有限制。但是，Rancher 在安装时需要在 kube-system 命名空间中创建资源。因此，你将无法在以 Autopilot 模式创建的 GKE 集群上安装 Rancher。如需详细了解 GKE Autopilot 模式和 Standard 模式之间的差异，请访问[比较 GKE Autopilot 和 Standard ](https://cloud.google.com/kubernetes-engine/docs/resources/autopilot-standard-feature-comparison)。
 
-**注意**：如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1)。
+**注意**：如果 Kubernetes 的版本更新到 v1.22 或更高版本，则 ingress-nginx 的版本也需要[更新](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/)。
 
 ```
 gcloud container clusters create cluster-name --num-nodes=3 --cluster-version=<VERSION>

versioned_docs/version-2.6/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-aks.md

@@ -50,7 +50,7 @@ To create an AKS cluster, run the following command. Use a VM size that applies
 
 :::note
 
-If the version of Kubernetes is updated to v1.22 or later, the version of ingress-nginx would also need to be [updated](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1).
+If you're updating from an older version of Kubernetes, to Kubernetes v1.22 or above, you also need to [update](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/) ingress-nginx.
 
 :::
 

versioned_docs/version-2.6/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-amazon-eks.md

@@ -79,7 +79,7 @@ Then enter the following values:
 
 To create an EKS cluster, run the following command. Use the AWS region that applies to your use case. When choosing a Kubernetes version, be sure to first consult the [support matrix](https://rancher.com/support-matrix/) to find the highest version of Kubernetes that has been validated for your Rancher version.
 
-**Note:** If the version of Kubernetes is updated to v1.22 or later, the version of ingress-nginx would also need to be [updated](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1).
+**Note:** If you're updating from an older version of Kubernetes, to Kubernetes v1.22 or above, you also need to [update](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/) ingress-nginx.
 
 ```
 eksctl create cluster \

versioned_docs/version-2.6/getting-started/installation-and-upgrade/install-upgrade-on-a-kubernetes-cluster/rancher-on-gke.md

@@ -120,7 +120,7 @@ When choosing a Kubernetes version, be sure to first consult the [support matrix
 
 To successfully create a GKE cluster with Rancher, your GKE must be in Standard mode. GKE has two modes of operation when creating a Kubernetes cluster, Autopilot and Standard mode. The cluster configuration for Autopilot mode has restrictions on editing the kube-system namespace. However, Rancher needs to create resources in the kube-system namespace during installation. As a result, you will not be able to install Rancher on a GKE cluster created in Autopilot mode. For more information about the difference between GKE Autopilot mode and Standard mode, visit [Compare GKE Autopilot and Standard.](https://cloud.google.com/kubernetes-engine/docs/resources/autopilot-standard-feature-comparison)
 
-**Note:** If the version of Kubernetes is updated to v1.22 or later, the version of ingress-nginx would also need to be [updated](https://kubernetes.github.io/ingress-nginx/#faq-migration-to-apiversion-networkingk8siov1).
+**Note:** If you're updating from an older version of Kubernetes, to Kubernetes v1.22 or above, you also need to [update](https://kubernetes.github.io/ingress-nginx/user-guide/k8s-122-migration/) ingress-nginx.
 
 ```
 gcloud container clusters create cluster-name --num-nodes=3 --cluster-version=<VERSION>