public/rancher-docs
1
0
Fork 0
mirror of https://github.com/rancher/rancher-docs.git synced 2026-09-26 04:58:07 +00:00
Code Issues Packages Projects Releases Wiki Activity

Tweaks and fix ip capitalization

Browse Source 
- Make small tweaks Catherine suggested
- Capitalize ip
This commit is contained in:
David Nuzik
2019-12-06 17:42:18 -07:00
parent 269b6fc446
commit f8b2726d16
1 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files
content/k3s/latest/en/installation/network-options/_index.md
+4 -4
View File
@@ -5,11 +5,11 @@ weight: 25
> **Note:** Please reference the [Networking]({<< baseurl >>}/k3s/latest/en/networking) page for information about CoreDNS, Traefik, and the Service LB.
By default, K3s will run with flannel as the CNI, using VXLAN as the default backend. To change the CNI, refer to the section on configuring a custom CNI. To change the flannel backend, refer to the flannel options section.
By default, K3s will run with flannel as the CNI, using VXLAN as the default backend. To change the CNI, refer to the section on configuring a [custom CNI](#custom-cni). To change the flannel backend, refer to the flannel options section.
### Flannel Options
The default backend for flannel is VXLAN. If you would like to use a different backend with flannel, use one of the options in the table below.
The default backend for flannel is VXLAN. To enable encryption, pass the IPSec (Internet Protocol Security) or WireGuard options below.
If you wish to use WireGuard as your flannel backend it may require additional kernel modules. Please see the [WireGuard Install Guide](https://www.wireguard.com/install/) for details. The WireGuard install steps will ensure the appropriate kernel modules are installed for your operating system. You need to install WireGuard on every node, both server and agents before attempting to leverage the WireGuard flannel backend option.
@@ -42,7 +42,7 @@ Ensure the settings were applied by running the following command on the host:
cat /etc/cni/net.d/10-calico.conflist
```
You should see that ip forwarding is set to true.
You should see that IP forwarding is set to true.
{{% /tab %}}
{{% tab "Calico" %}}
@@ -63,7 +63,7 @@ Ensure the settings were applied by running the following command on the host:
cat /etc/cni/net.d/10-canal.conflist
```
You should see that ip forwarding is set to true.
You should see that IP forwarding is set to true.
{{% /tab %}}